Trademarks and re istered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to chan e without notice. Ima es shown may vary sli htly from the product.
NB5540
Packa e Contents
Your Netcomm dealer: NetComm is ustralia’s dynamic data communications and
networking solutions provider. For more information on this and
other NetComm products, please visit www.netcomm.com.au
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia.
PHONE (02) 9424 2070 • F X (02) 9424 2010
Trademarks and re istered trademarks are the property of NetComm
Limited or their respective owners. Specifications are subject to chan e
without notice. Ima es shown may vary sli htly from the product.
N367
NetComm is the name Australians trust for
reliable data communications.
Only NetComm develops its products specially
for Australian conditions, makin
NetComm the first choice for
quality and reliability.
Listed on the Australian Stock
Exchan e (ASX: NTC), NetComm is
Australia’s own data communications and
networkin solutions provider.
For more information this and other NetComm
products, please visit www.netcomm.com.au
Technical Specifications Technical Specifications
NP5430 Wireless LAN PCMCIA Adaptor
Driver and utility CD
User Guide
Continued
Media ccess Protocol
IEEE 802.11
Bit Error Rate
-68.9dBm @ 54Mbps OFDM, 10% PER
-86.1dBm @ 11Mbps CCK, 8% PER
Frequency 2.4_2.4835GHz
Data Rate
54 48 36 24 12 11 9 65.5 2 1
Mbps auto fall back
Modulation Technique
BPSK/QPSK/CCK/OFDM
Output Power
18 dBm (typical) at 11Mbps CCK
13 dBm (typical) at 54Mbps OFDM
Receiver Sensitivity
-88dBm @ 11M CCK
-68dBm @ 54M OFDM
Coverage Indoor 100m
Outdoor 400m
WEP Key bits
64-bit data encryption
128-bit data encryption
Security
GENER L:WEP
WINXP ONLY:AES
TKIP
802.1x
Passthrou h
LEDs Pwr Power on
Link Link status
Transmit & receive status
Certification C-tick (Australia)
Dimensions
115 x 54 x 7.5 mm
Wei ht: 41.5
Operating Environment
TEMPER TURE
0°C~55°C (operatin ),
-25°C-70°C (stora e)
HUMIDITY
10~90% RH
System Interface
PCMCIA, PC Card type II
System Requirements
• Card bus ready Notebook Type II
•
Windows®98 2000/ME/X
• Pentium Class 300MHz or hi her
• CD-ROM drive
Driver Support
Windows®98 2000/ME/XP
ntenna PCB antenna
Power DC3.3V
Continued
NP5430
54 Mbps IEEE 802.11G WIRELESS PC CARD