NetComm Liberty Series 3G18Wn User manual

NETCOMM LIBERTYTM SERIES
3G Wireless N300 Router

1. With the supplied Ethernet cable, connect your computer to one of the
yellow LAN ports on the back of the router.
2. Connect a compatible 3G USB modem to the port of the router.
3. Connect the supplied Power Adapter to the wall power outlet and to the
power socket on the back of the router.
4. Wait 2 minutes to allow the router to power up.
1
Connecting your device
USB Modem
Laptop
Power Point Power Connector

3G Connections
1. The router will attempt to automatically detect the connection details from your
3G USB modem. This will take up to 2 minutes.
2. If the 3G APN connection details are successfully detected you will be able to
instantly access the Internet.
Note: Please refer to the Setting up your 3G router section in the user guide (on CD) if you have any problems connecting to the Internet, or if:
 •YourSIMcardrequiresaPINcode
 •Your3Gbroadbandserviceproviderrequiresyoutoinputtheusername/passwordforyour3Gconnection
 •Youwishtousealternate3Gconnectiondetails(suchasaspecialAPN)
Non 3G Connections
1. On your computer, open a web-browser (such as Internet Explorer, Firefox, or
Safari) and type in 192.168.20.1 into the address bar.
2. At the login screen type adminintoboththeusernameandpasswordelds.
Then click submit.
3. Mouseover Internet Settings and click on WAN.
4. Select your WAN connection type from the drop box.
5. Enter the relevant information in this screen as supplied by your ISP.
6. Click on Apply to save the settings and wait 2 minutes.
7. The Internet connection status can be determined by clicking on status from the
menu after logging in to the router.

2
Establishing Wireless Connection
Youcanconnectmultiplewirelessdevices,includinglaptops,desktopsandPDA’s
to your router by following these two basic steps.
1. Using your wireless device, scan the wireless networks in your area and select the
network called NetComm Wireless, then click connect.
2. Enter the following default security key: a1b2c3d4e5
Note: To ensure wireless security, we recommend that you change the default settings through the web Interface. For more details, please consult the
User Guide.
Laptop
Power
Point
ADSL Router
DesktopGamingLaptop
Power
Connector
3G USB Modem

I cannot connect via 3G
• Makesurethatyouareusingacompatible3GUSBmodem.Check
www.netcomm.com.au for the latest 3G compatibility list
• Trymanuallyenteringtheinformationrequiredtoconnectvia3GsuchasAPN,
User Name and Password. These details are supplied by your 3G ISP
Cannot establish a wireless connection
• Makesurethewirelessswitchonyourlaptopisintheonposition
• Ensureyourdeviceandwirelessadapterareusingthesamewirelesssecurity
settings
3
Troubleshooting
?

4
NetComm Velocity Series
Accessories for your product
NP910n Wireless N 150, this product is perfect for users wishing to extend their network with
the convenience of a miniature USB Adapter
NP900n Wireless N 300, this product is perfect for home users
NP901n Wireless N 300, perfect for data intensive applications within a SoHo environment.
The included USB dock gives you the ability to move the USB Adapter so you always
receive the best possible wireless signal
NP902n Wireless N 300, perfect for SoHo, business users and gamers. The NP902n features
a cable to allow you to position the adapter, a removable hook to neatly attach to the
rear of your monitor and 2 detachable external antennas ensuring you receive the best
possible wireless signal at all times.
* MaximumwirelesssignalrateandcoveragevaluesarederivedfromIEEEStandard802.11gand802.11nspecications.Actualwirelessspeed
andcoveragearedependentonnetworkandenvironmentalconditionsincludedbutnotlimitedtovolumeofnetworktrafc,buildingmaterials
andconstruction/layout.
NP900n
NP901n
NP902n
NP910n