NETGEAR FSM726S User manual

FSM726S
24 port 10/100 Mbps Managed Stackable Switch with Gigabit Ports
Stackable Layer 2 Management with Built-in Gigabit Speed
Flexible
Powerful
Manageable
Progressive
Complete
Everybody’s Connecting. ™
• Help is there when you need it!
NETGEAR provides 24x7 telephone
and e-mail technical support** in
English, with selected local language
support during office hours.
High Port Density with Layer 2 Management
Flexibility
NETGEAR’s non-blocking FSM726S is a Layer 2 managed switch that’s intuitive enough for new
users but powerful enough for experienced professionals. With the utility of 24 10/100 ports,
two rear stacking ports, and two Gigabit Ethernet ports – using either built-in copper or GBIC
slots – small and growing business networks can accommodate as many as 250 users and utilize
up to 12 Gigabit Ethernet ports. Built-in stacking ports provide simple, cost-effective stacking –
no optional modules required. The FSM726S stacks up to six units, and comes with the stacking
cable. The versatile FSM726S offers two management interface options: an easy-to-use, browser
based interface and a command line interface. Easy to buy, set up and use, the FSM726S is a
compelling value.
Ideal for a growing office that wants superior performance with options for expansion and gigabit
connections. Can be combined with additional FSM726S and FSM750S switches using dedicated
stacking ports.
This non-blocking switch provides high-performance data transfer via 24 10/100 ports, two built-in
front gigabit uplinks, and two rear stacking ports that you can use to stack up to 144 ports and 12
gigabit ports.
Meet your management needs with SNMP, RMON, DHCP, and BootP. Advanced features include
VLAN, DiffServ traffic prioritization 802.1p (QoS), RADIUS, 802.1x, port trunking, Spanning Tree,
and port mirroring.
Use and stack the FSM726S as an unmanaged switch – you can save the management features until
you're ready to use them. All ports are auto-negotiating and support Auto Uplink™technology.
The FSM726S comes packaged with stacking ports, gigabit uplinks, a stacking cable and a rack-
mounting kit.
PRO
PRO
RECOMMENDEDRECOMMENDED

4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR
E-mail: [email protected]
www.NETGEAR.com
©2003 NETGEAR, Inc. NETGEAR®, the Netgear
logo, The Gear Guy, Everybody's connecting
and Auto Uplink are trademarks or registered
trademarks of NETGEAR, Inc. in the United
States and/or other countries. Other brand and
product names are trademarks or registered
trademarks of their respective holders.
Information is subject to change without notice.
All rights reserved.
** Free basic installation support provided
for 90 days from date of purchase; optional
premium support available.
D-FSM726S-2
Technical Specifications
•Network Protocol and Standards Compatibility:
-IEEE 802.3i 10BASE-T
-IEEE 802.3u 100BASE-TX
-IEEE 802.3ab 1000BASE-T
-IEEE 802.3x Flow Control
•LEDs:
-Per port (10/100 and Gigabit): Link, Speed,
Duplex, Activity, Collision
-Per device: Power, Stack In, Stack Out, Master
•Physical Interfaces:
-24 RJ-45 connector for 10BASE-T and 100BASE-
TX (Auto Uplink™on all ports)
-Two RJ-45 connectors for 10BASE-T, 100BASE-
TX, and 1000BASE-T (Auto Uplink on all ports)
-Two Gigiabit Interface Converter (GBIC) slots for
GBIC modules
-RS-232 Console Port
-Rear Stacking Connectors
•Performance Specifications:
-Forwarding modes: Store-and-forward
-Bandwidth: 12.8 Gbps (non-blocking)
-Packet forwarding: 9.5 Mpps
-Network latency: < 80 µs for 64-byte frames (100
Mbps to 100 Mbps)
-Packet buffer memory: 1.2 MB
-Addressing: 48-bit MAC address
-Address database size: 8,000 media access control
(MAC) addresses per system
-Acoustic noise: (ANSI-S10.12) 48 dB
-Heat dissipation: 18.99 BTU/hr
-Mean Time Between Failure (MTBF): 58,300
(~6.5 years)
•Management Specifications:
-IEEE 802.1x Standard for Port Based Network
Access Control*
-IEEE 802.1Q Static VLAN (Up to 64)
-IEEE 802.1p Class of Service (CoS)
-IEEE 802.1D Spanning Tree Protocol
-Port Trunking - Manual as per IEEE802.3ad
Link Aggregation
-IGMP Snooping Support
-Port Mirroring Support
-RFC 1157 SNMP
-RFC 1757 RMON groups 1, 2, 3, and 9
-RFC 1213 MIB II
-RFC 1643 Ethernet Interface MIB
-RFC 1493 Bridge MIB
-RFC 951 BootP
-RFC 2131 DHCP
-RFC 2998 DiffServ
-RFC 2865 RADIUS
-Private Enterprise MIB
•User Interfaces:
-Command Menu Interface via console port
-Web-based management via embedded HTTP server
-Telnet remote login
•Electrical Specifications:
-Power consumption: 36W maximum
-Voltage: 100 - 127/200 - 240 VAC, 50-60 Hz
•Physical Specifications:
-Dimensions: 440 x 205 x 43 mm (17.3" x 8.1" x 1.6")
-Weight: 3.2 kg (7.0 lbs)
•Environmental Specifications:
-Operating temperature: 0° to 40°C (32° to 104° F)
-Storage temperature: -20° to 70°C (-4° to 158° F)
-Operating humidity: 90% maximum relative
humidity, noncondensing
-Storage humidity: 95% maximum relative humidity,
noncondensing
-Operating altitude: 3,000 m (10,000 ft) maximum
-Storage altitude: 3,000 m (10,000 ft) maximum
•Safety:
-CE mark, commercial
-CSA certified (CSA 22.2 #950)
-TUV licensed (EN 60 950)
-UL listed (UL 1950)/cUL IEC950/EN60950
•Emissions:
-CE mark, commercial
-FCC Part 15 Class A
-VCCI Class A
-EN 55022 (CISPR 22), Class A EN 50082-1
-C-Tick
•Electromagnetic Immunity:
-EN 50082-1
-EN 55024
•Warranty:
-NETGEAR 5-year warranty
Package Contents
-FSM726S Managed Stackable Switch
-Null modem cable
-Stackable cable
-Rubber footpads for tabletop installation
-Power cord
-Rack-mount kit
-User’s guide
-Support information card
-Warranty card
NETGEAR Related Products
-FSM750S 48+2 Managed Stackable Switch
-FSM726 24+2 Managed Switch
-GSM712 Managed Gigabit Switch
-AGM721F 1000Base-SX GBIC module
(SC connector)
* available via a free download from the Netgear web site in July 2003
FSM726S 24-port 10/100 Mbps Managed Stackable Switch with Gigabit Ports
UL
®