NETGEAR FSM7328S - ProSafe Switch User manual

24/7
T E C H N I C A L
SUPPORT*
1-888-NETGEAR (638-4327)
Email: [email protected]
ProSafe™ 24, 24 SFP, and 48 Port
Gigabit L3 Managed Stackable Switches Data Sheet
GSM7328S, GSM7328FS, GSM7352S
Flexible, Stackable, High Speed Switching!
NETGEAR’s low-cost, stackable, Gigabit Ethernet switches deliver maximum throughput and
flexibility where you need it — to high-speed, high-density workgroups at the edge of the
network, in the backbone of growing networks or for bandwidth thirsty file and application
servers. The ProSafe GSM7328S and GSM7352S fully managed switches deliver 24 and 48
ports of auto-sensing 10/100/1000 Mbps interfaces for high-density copper connectivity. Four
(GSM7328S) or eight (GSM7352S) hot-swappable Small Form-factor Pluggable (SFP) gigabit
interfaces provide optional fiber connectivity for longer reach Gigabit Ethernet requirements.
For high-density fiber installations, the GSM7328FS delivers 24 hot-swappable SFP Gigabit
interfaces for fiber connectivity and 4 combo ports of auto-sensing 10/100/1000 Mbps
interfaces for copper connectivity. All switches have four high-speed, module bays offering
modular expansion for 10 Gigabit Ethernet or 24 Gigabit Stacking connectivity. The non-
blocking design of the switches delivers simultaneous, full wire-speed, low-latency throughput
to all ports.
A full suite of Layer 3 switching functionality ensures reliable routing between VLANs and
network segmentation where and when you need it, at no additional cost. By configuring the
switches into a stack of up to 8 units across a 48 Gbps bi-directional ring, a high-density, single
IP-addressable switch can be built.
Robust security features include IEEE 802.1x port-based authentication and access control
lists, ensuring that only authorized users can access your network. Secure management of the
switches is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secured Shell
(SSH) for command-line sessions or with SNMP v3 for network management software. For
workgroup deployments in cost-sensitive organizations that require Layer 3 switching, additional
Gigabit capacity, high-value price point, flexibility of stacking, and reduced maintenance
requirements, NETGEAR’s ProSafe Gigabit Layer 3 Stackable switches deliver the ideal access-
edge solution.
With their high-value price point, flexible design, and reduced maintenance requirements,
NETGEAR’s ProSafe Gigabit Layer 3 Stackable switch solutions yield a high return on
investment, and are ideal for delivering highly reliable, converged voice, video, and data services
over a single network infrastructure.
Powerful In desktop switching environments, wire-speed performance with full QoS control for
all 10/100/1000 interfaces is critical. The 4 high-speed 10G/24G module bays provide
unprecedented flexibility, whether you are stacking between switches, attaching bandwidth-
thirsty file servers, or aggregating critical data to the core of your network.
Easy to Use Simplify and reduce IT staff workload and mean time-to-repair with intuitive, GUI-based device
configuration, and an industry-standard command-line interface (CLI). The EZ-Config tool
simplifies initial configuration steps to streamline the out-of-box set-up. Stacking capabilities
allow you to build a single-IP manageable device with up to eight switches utilizing
ultra-high-speed 48Gbps across an intelligence bi-directional redundant stacking links.

ProSafe™ 24, 24 SFP and 48 Port Gigabit L3 Managed Stackable Switches GSM7328S, GSM7328FS, GSM7352S
Physical Interfaces
RJ-45 Connectors for 10BASE-T,
100BASETX, and 1000BASE-T (Auto
Uplink™ on all ports):
-GSM7328S 24 ports
-GSM7328FS 4 ports
-GSM7352S 48 ports
Small form-factor pluggable (SFP)
modules for fiber Gigabit Ethernet
interfaces:
-GSM7328S 4 slots
-GSM7328FS 24 slots
-GSM7352S 8 slots
(4) 10 Gigabit Ethernet/24G Stacking
Module Bays
RS-232 Console Port
Layer 2 Services:
IEEE 802.1Q Static VLAN (Up to 4k)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1v Protocol VLAN & Port
VLAN
IEEE 802.1 Q-inQ
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation (LACP)
up to 48 trunks
IEEE 802.1x Port Access Authentication
IGMP v1, v2 Snooping Support
Network Storm Protection including
Broadcast, multicast and unicast traffic
Static multicast filtering
Ingress Rate Limit in 1Kbps increments
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
Layer 3 Services:
VLAN routing
Port routing
RIP v1/v2 (RFC 1057, 2453)
OSPF v2 (RFC 1583, 2328)
OSPF Equal Cost Multipath (ECMP)
VRRP (RFC 2338, 2787) 64 instances
ACLs – 1,024 Global
DiffServ QOS (RFC 2998) DNS
Caching
DHCP/Bootp Relay -primary and
backup (RFC3046)
UDP Relay
Switch Management Specifications:
SNMP v1, v2c, v3 with multiple
IP addresses
RFC 1157, 1901-1910, 2574, 2575
RFC 768 UDP
UDP Relay
RFC 854-859 Telnet
RFC 951 BootP
RFC 1213 MIB II
RFC 1757 RMON groups 1,2,3, and 9
RFC 1215 SNMP Traps
RFC 1493 Bridge MIB
RFC 1643 Ethernet Interface MIB
RFC 1534 DHCP and BootP
Interoperation
RFC 2131, 2132 DHCP and BootP
RFC 2865 RADIUS (both switch and
management access)
RFC 2866 RADIUS Accounting
Private Enterprise MIB
Port Mirroring Support
RFC 2236 IGMP v2
IGMP Querier
RFC 2030 Simple Network Time
Protocol (SNTP)
RFC 1027 Proxy ARP
SYSLOG
Firmware upgrade via TFTP or HTTP
•
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Performance Specifications:
Forwarding modes: Store-and-forward
Bandwidth: GSM7328S, GSM7328FS
- 144 Gbps (non-blocking)
GSM7352S - 196 Gbps (non-blocking)
Switch latency: < 6 us for 64-byte
frames (10G to 10G)
< 2 us for 64-byte frames
(10G to 10G)
System memory: 256 MB
Packet buffer memory: 334 KB
embedded memory per port
Code Storage (Flash): 32 MB
Address database size: 8K media
access control (MAC) addresses
Number of VLANs: 512 (1-4096)
Number of trunks: 6
Number of Queues: 8
Number of routes: 512
Jumbo frame support: up to 9K
packet size
Acoustic noise: GSM7328S 52.4 dB
GSM7328FS 51.7 dB
GSM7352S 52.8 dB
Heat Dissipation:
-GSM7328S 273.12 BTU/hr
-GSM7328FS 266 BTU/hr
-GSM7352S 375.54 BTU/hr
Mean Time Between Failure (MTBF):
117,747 hours (~ 13.4 years)
User Interfaces:
Command Line Interface (CLI) via
console port
Web-based management via
embedded HTTP server protected with
Secured Sockets Layer
(SSLv3) or Transport Layer Security
(TLS v1)
Telnet remote login (5 sessions)
securable with Secured Shell
(SSH v1.5, v2)
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
ProSafe 48+4 Gigabit L3
Stackable Switch
GSM7352S
ProSafe 24+4 Gigabit L3
Stackable Switch
GSM7328S
ProSafe 24+4
Gigabit L3
Stackable Switch
GSM7328FS
Wireless
Adapter
WAG511
Gigabit NIC GA311
Gigabit NIC GA511
ProSafe Dual Band Access Point
Gigabit NIC
GA311
ProSafe VPN
Firewall 200
FVX538
Broadband
Modem
Internet
Broadband
Modem

4500 Great America Parkway
Santa Clara, CA 95054 USA
1-888-NETGEAR (638-4327)
E-mail: [email protected]
www.NETGEAR.com
© 2007 NETGEAR, Inc. NETGEAR, the NETGEAR logo, Connect with Innovation, Everybody’s connecting, the Gear Guy logo, IntelliFi,
ProSafe, RangeMax and Smart Wizard are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries.
Microsoft, Windows, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or
other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information issubject
to change without notice. All rights reserved.
*Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included
in free basic installation support; optional premium support available.
DS-GSM7328S-03/07
LEDs:
Per port: Speed, Link, Activity
Per device: Power, Fan Status, Stack
ID, RPS, Master
Network Standards Compatibility:
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3x Flow Control
IEEE 802.3ae 10000BASE-X
Physical Specifications:
Dimensions (w x d x h): 440 x 385 x
43 mm (17.32 x 15.16 x 1.7 in)
Weight: GSM7328S 4.5kg (10lbs)
GSM7352S 5.4 kg (12lbs)
GSM7328FS 5.4kg (12lbs)
Environmental Specifications:
Operating temperature:
0° to 40° C (32 to 104° F)
0° to 50° C (32 to 122° F)
for GSM7328FS
Storage temperature: -20° to 70° C (-4
to 158° F)
Operating humidity: 90% maximum
relative humidity, noncondensing
Storage humidity: 95% maximum
relative humidity, noncondensing
Operating altitude: 3,000 m
(10,000 ft) maximum
Storage altitude: 3,000 m
(10,000 ft) maximum
•
–
–
•
–
–
–
–
–
–
•
–
–
•
–
–
–
–
–
–
Electrical Specifications
Power Consumption:
-GSM7328S 80 W maximum
-GSM7328FS 78 W maximum
-GSM7352S 110 W maximum
Electromagnetic Emissions:
CE mark, commercial
FCC Part 15 Class A
VCCI Class A
EN 55022 (CISPR 22), Class A
C-Tick
Electromagnetic Immunity:
EN 55024
Safety:
CE mark, commercial
CSA certified (CSA 22.2 #950)
GSM7328FS (CSA22.2 #60950-01)
UL listed (UL 1950)/CUL IEC950/
EN60950)
GSM7328FS (UL 60950-1)/CUL/
EN60950-1)
Modules:
ProSafe AGM731F 1000BASE-SX SFP
GBIC
ProSafe AGM732F 1000BASE-LX SFP
GBIC
ProSafe AGM733 1000BASE-ZX SFP
GBIC
ProSafe AX741 10 Gigabit Ethernet
XFP Adapter
ProSafe AX742 24 Gigabit Stackable
Modul
ProSafe AXM751 10GBASE-SR XFP
GBIC
ProSafe AXM752 10GBASE-LR XFP
GBIC
•
–
•
–
–
–
–
–
•
–
•
–
–
–
–
–
•
–
–
–
–
–
–
–
Warranty:
Limited Lifetime
ProSupport Packs
GSM7328S
PMP1133 OnSite 24x7, 10GBASE-SR
XFP GBIC
PMP3333 OnSite 9x5, 10GBASE-LR
XFP GBIC
GSM7328FS
PMB0333 OnCall 24x7, Category 3
PRR0333 XPress HW, Category 3
GSM7352S
PMP1134 OnSite 24x7, 10GBASE-SR
XFP GBIC
PMP3334 OnSite 9x5, 10GBASE-LR
XFP GBIC
Package Contents
ProSafe Gigabit L3 Managed Switch
Null modem cable
Rubber footpads
Power cable
Rack-mount kit
Installation Guide
Resource CD-ROM
Warranty/Support information card
•
–
•
–
–
•
–
–
•
–
–
–
–
–
–
–
–
–
–
ProSafe™ 24, 24 SFP and 48 Port Gigabit L3 Managed Stackable Switches GSM7328S, GSM7328FS, GSM7352S