NETGEAR GS105v5 User manual

Installation Guide
Package contents
• Gigabit Ethernet switch
• Power adapter (varies by region)
• Wall-mount kit
• Installation guide
1. Register your device
1. From a computer or mobile device that is connected to the Internet, go to my.netgear.com.
2. Log in to your NETGEAR account.
If you don’t have a free NETGEAR account, you can create one.
The My Products page displays.
3. From the menu on the left, select Register a Product.
4. In the Serial Number eld, type the serial number of your switch.
The serial number is 13 digits long. It is printed on the switch label.
5. From the Date of Purchase menu, select the date that you purchased the switch.
6. Click the Register button.
Your switch is registered to your NETGEAR account.
A conrmation email is sent to your NETGEAR account email address.
2. Connect the switch
Gaming
console
Sample connections
Desktop
computer
Smart TV
Access
point Internet
Router
5-Port and 8-Port
Gigabit Ethernet
Unmanaged Switch
GS105v5 and GS108v4
3. Check the LEDs
LED Description
Power • On. The switch is receiving power.
• Off. The switch is not receiving power.
Port
(left and right)
• Both LEDs are solid green. 1000 Mbps link on this port.
• Left LED is solid green. 100 Mbps link on this port.
• Right LED is solid green. 10 Mbps link on this port.
• Blinking green. The port is sending or receiving trafc.
• Off. The switch does not detect a link on this port.
GS108v4
April 2021
ReadyNAS
This switch is designed for indoor use and to be connected to other indoor devices only. If you
want to connect it to a device located outdoors, the outdoor device must be properly grounded
and surge protected, and you must install an Ethernet surge protector inline between the switch
and the outdoor device. Failure to do so can damage the switch.
Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warning information.

Support and Community
Visit netgear.com/support to get your
questions answered and access the latest
downloads.
You can also check out our NETGEAR
Community for helpful advice at community.
netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous
pouvez accéder à ce document en français
canadien à https://www.netgear.com/
support/download/.
(If this product is sold in Canada, you can
access this document in Canadian French
at https://www.netgear.com/support/
download/.)
For regulatory compliance information
including the EU Declaration of Conformity,
visit https://www.netgear.com/about/
regulatory/. See the regulatory compliance
document before connecting the power
supply.
For NETGEAR’s Privacy Policy, visit https://
www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to
NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-
conditions.If you do not agree, return the
device to your place of purchase within your
return period.
Wall-mount the switch
The bottom panel of the switch includes two mount holes. The center-to-center
distance between the holes is:
• GS105v5: 1.8 in (46 mm)
• GS108v4: 3.1 in (80 mm)
1. Mark the wall where you want to drill the holes.
2. Insert the provided anchors into the wall.
3. Install the provided screws with a No. 2 Phillips screwdriver. Leave about ¼ inch (6
mm) of each screw protruding from the wall.
4. Align the holes on the bottom panel of the switch with the screws and mount the
switch.
Technical specications
Specications Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T
Power adapter 12V @ 0.5A DC input
Operating humidity 10%–90% relative humidity, noncondensing
Specications GS105v5 GS108v4
Ports 5 8
Power consumption 2.7W max. 4.9W max
Weight 0.56 lb (0.25 kg) 1.04 lb (0.47 kg)
Dimensions (W x D x H) 4.0 x 3.7 x 1.1 in.
(101 x 94 x 27 mm)
6.2 x 4.0 x 1.1 in.
(158 x 102 x 27 mm)
Operating temperature for switch only 32–122° F (0–50° C) 32–104° F (0–40° C)
Operating temperature for switch
using provided power adapter
32–104° F (0–40° C) 32–104° F (0–40° C)
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference
purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
Note: You can mount the switch with the
Ethernet ports facing down (at the bottom) as
shown, or with the Ethernet ports facing up.