NETGEAR GS116v2 User manual

Installation Guide
16-Port Gigabit Ethernet Unmanaged Switch
Model GS116v2
Package Contents
• Gigabit Ethernet switch
• Power adapter (varies by region)
• Installation guide
Note: You can wall mount the switch. A wall-mount kit is not included.
3. Check the LEDs
When you connect the power adapter to the switch and plug it into an electrical
outlet, the LEDs indicate the status.
LED Description
Power • On. The switch is receiving power.
• Off. The switch is not receiving power.
Port
(left and right)
• Both LEDs are solid green. 1000 Mbps link on this port.
• Left LED is solid green. 100 Mbps link on this port.
• Right LED is solid green. 10 Mbps link on this port.
• Blinking green. The port is sending or receiving trafc.
• Off. The switch does not detect a link on this port.
1. Register with the NETGEAR Insight app
Use the NETGEAR Insight App to register your switch, activate your warranty, and
access support.
1. On your iOS or Android mobile device, visit the app store, search for
NETGEAR Insight, and download the latest app.
2. Open the NETGEAR Insight app.
3. If you did not set up a NETGEAR account, tap Create NETGEAR Account
and follow the onscreen instructions.
4. Tap the menu in the upper-left corner to open it.
5. Tap REGISTER ANY NETGEAR DEVICE.
6. Enter the serial number located on the bottom of the switch, or use the
camera on your mobile device or tablet to scan the serial number bar code.
7. Tap Go.
8. Tap View Device to add the switch to a network.
The switch is registered and added to your account.
2. Connect the switch
Internet
Router
ReadyNAS
Sample connections
GS116v2
Desktop
Smart TV
Access point
Gaming console

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get help, access the
latest downloads and user manuals, and join our community. We recommend
that you use only ofcial NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Do not use this device outdoors. If you connect cables or devices that are
outdoors to this device, see https://kb.netgear.com/000057103 for safety and
warranty information.
June 2019
Technical Specications
Specications Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or
1000BASE-T
Network cable We recommend that you use Category 5e (Cat 5e)
cable or higher for Gigabit Ethernet connections.
Ports 16
Power adapter 12W max. and 12V@ 1A DC input
Power consumption 9.5W max
Weight 1.973 lb. (895 g)
Dimensions (W x D x H) 11.26 in. x 3.98 in. x 1.06 in
(286 mm x 101 mm x 27 mm)
Operating temperature 32 to 122° F (0 to 50° C)
Operating humidity 10% to 90% relative humidity, non-condensing