Netopia 3346-ENT User manual

Netopia
®
4-Port ADSL Router
MM
MMoo oodd ddee ee llllss ss:: ::
Netopia® 3346(EU, DE)-ENT / 3356(EU, DE)-ENT ADSL Routers – All Models
Quickstart Guide
Unpack your Gateway, check your package contents, and decide on a location :
• Place the Gateway in a spot that is easily accessible for you.You can lay it flat or
mount on the wall.
• Keep the cables away from other electrical devices that may interfere with the oper-
ation of your Gateway.
If you don’t have everything, contact your supplier immediately.
1.
After unpacking your Netopia Router shipping carton, decide where you want
to locate the Router.
You should install the Router near your PC or another location that permits easy access
and visibility. You can lay the Netopia Router flat or mount it on a wall. Make sure any
Ethernet cables are kept away from power cords, fluorescent lighting fixtures, and
other sources of electrical interference. Put the Router in a location where air can circu-
late freely around it.
2.
Connect the power transformer to the power jack on the Router back panel.
Plug the power transformer into an appropriate electrical outlet.
Turn on the power with the power switch. The Power light should come on solid green.
3.
Connect the Router to the wall jack that supports your DSL service.
Insert one end of the lavender telephone cable in the DSL port on the Router back
panel until you feel it lock. Insert the other end of the telephone cable into the tele-
phone jack connected to your ADSL service. The DSL SYNC indicator light should
blink for up to two minutes and then come on solid green.
4.
Connect the Router to create your Ethernet local area network (LAN.)
Connect the yellow Ethernet cable to your first PC and to the Router.
The LAN indicator light should come on solid green for the port where you connected
your Ethernet cable.
Connect each computer or other device to a switch port on the back of the Router with
an Ethernet cable (maximum length 100 meters). If you need more than four ports, con-
nect a hub or switch to the Router using a standard Ethernet cable.
When all of your connections are made, the status LEDs on the front of your Netopia Router
will light, according to the following diagram:
The following instructions assume that you want to use the automatic configuration and
address sharing features of the Router to provide IP information to devices on your local
Ethernet network.
1.
Configure your computer to use an IP address on the same TCP/IP network as
the Netopia Router.
• Windows 95/98 or Windows ME:
• Right-Click on the NN
NNee ee tt tt ww ww oo oorr rrkk kk NN NNee ee iiiigg gghh hhbb bboo oorr rrhh hhoo oooo oodd dd
icon on your Windows desktop and
select PP
PPrr rroo oopp ppee ee rr rrtt tt iiiiee ee ss ss
from the pull-down menu.
• In the list of network components, highlight the entry that says
“ TT
TT CC CCPP PP////IIIIPP PP (( (([[[[yy yyoo oouu uurr rr EE EEtt tt hh hhee ee rr rrnn nnee ee tt tt cc ccaa aa rr rrdd
dd hh hhee ee rr rree ee ]]]])) ))
”.
• Click the PP
PPrr rroo oopp ppee ee rr rrtt tt iiiiee ee ss ss
button.
• Click the OO
OObb bbtt tt aa aa iiiinn nn aa aa nn nn IIIIPP PP aa aa dd dddd ddrr rree ee ss ssss ss aa aa uu uutt tt oo oomm mmaa
aa tt tt iiiicc ccaa aa llllllllyy yy
radio button. Click the DNS Con-
figuration tab. Click the DD
DDiiiiss ssaa aa bb bbllllee ee DD DDNN NNSS SS
radio button. Click the Gateway tab and remove
any installed Gateways. Click the OO
OOKK KK
button twice. When prompted, restart your PC.
• Proceed to the next section “Configure Your Netopia Router” .
• Windows 2000 and XP
• Right-Click on the MM
MMyy yy NN NNee ee tt tt ww ww oo oorr rrkk kk PP PPllllaa aa cc ccee ee ss ss
icon on your Windows desktop and select
PP
PPrr rroo oopp ppee ee rr rrtt tt iiiiee ee ss ss
.
• Select your LL
LLoo oocc ccaa aa llll AA AArr rree ee aa aa CC CCoo oonn nnnn nnee ee cc cctt tt iiiioo oonn nn
.
• Right click on your LL
LLoo oocc ccaa aa llll AA AArr rree ee aa aa CC CCoo oonn nnnn nnee ee cc cctt tt iiiioo oonn nn
and select PP
PPrr rroo oopp ppee ee rr rrtt tt iiiiee ee ss ss
.
• Select IIIInn
nntt tt ee ee rr rrnn nnee ee tt tt PP PPrr rroo oott tt oo oocc ccoo oollll [[[[TT TT CC CCPP PP////IIIIPP PP]]]]
.
• Click the PP
PPrr rroo oopp ppee ee rr rrtt tt iiiiee ee ss ss
button.
• Click the OO
OObb bbtt tt aa aa iiiinn nn IIIIPP PP aa aa dd dddd ddrr rree ee ss ssss ss aa aa uu uutt tt oo oomm mmaa aa tt tt iiiicc
ccaa aa llllllllyy yy
radio button and the OO
OObb bbtt tt aa aa iiiinn nn DD DDNN NNSS SS
ss
ssee ee rr rrvv vvee ee rr rr aa aa dd dddd ddrr rree ee ss ssss ss a
a
aa uu uutt tt oo oomm mmaa aa tt tt iiiicc ccaa aa llllllllyy yy
radio button. Click the OO
OOKK KK
button.
• Proceed to the next section “Configure Your Netopia Router” .
Checklist
Netopia Router CD & Quickstart
Guide
Power Supply
Lavender RJ-11
Telephone Cable Yellow RJ-45
Ethernet Cable
LAN 1
LAN 2
LAN 3
LAN 4
DSLSYNC
Power
-or-
North American
International
Set up your Router
DSL 10/100BT LAN Power Supply
Power Off / On
LAN
DSL
41
2
3
Power Switch
2
3
4
Rear View
Configure Your PC for Dynamic Addressing
LAN 1
LAN 2
LAN 3
LAN 4
DSL SYNC
Power
Power - Green when power is applied
Flashes green when training
Solid green when connected
Solid green when trained
to each port on the LAN.
LAN 1, 2, 3, 4 -
DSL SYNC -
Flash green when there is
activity on each port.
Flashes green for DSL traffic
Front View
1 2 3
B
ROADBAND WITHOUT
B
OUNDARIES
™

• Macintosh Mac OS (Your
Macintosh must be using MacOS 9 or higher.)
• Select CC
CCoo oonn nntt tt rr rroo oollll PP PPaa aa nn nnee ee llllss ss
from the Apple Menu.
• Open the TCP/IP Control Panel.
• Choose CC
CCoo oonn nnnn nnee ee cc cctt tt vv vviiiiaa aa EE EEtt tt hh hhee ee rr rrnn nnee ee tt tt
.
• Choose CC
CCoo oonn nnff ffiiiigg gguu uurr rree ee UU UUss ssiiii nn nngg gg DD DDHH HHCC CCPP PP SS SSee ee rr rrvv vvee ee rr rr
. Close and Save.
• Proceed to the next section “Configure Your Netopia Router” .
• Mac OS X
• Launch System Preferences from the Dock or from the Apple Menu.
• Select the NN
NNee ee tt tt ww ww oo oorr rrkk kk
Preference Pane.
• Choose SS
SShh hhoo ooww ww :: :: BB BB uu uuiiiilllltt tt -- --iiiinn nn EE EEtt tt hh hhee ee rr rrnn nnee ee tt tt
.
• Click the TCP/IP tab. Choose CC
CCoo oonn nnff ffiiiigg gguu uurr rree ee :: :: UU UUss ssiiii nn nngg gg DD DDHH HHCC CCPP PP
.
• Quit System Preferences.
• Proceed to the next section “Configure Your Netopia Router” .
1.
Run a Telnet application from the computer on the same network as the
Router.
• Windows users click on the SS
SStt tt aa aa rr rrtt tt
menu, select RR
RRuu uunn nn
, and in the resulting entry box,
type “ telnet 192.168.1.1 " (without the quotes).
• Macintosh OS X users launch the TT
TT ee ee rr rrmm mmiiiinn nnaa aa llll
application, either from the Dock or from
the Utilities folder, and type “ telnet 192.168.1.1 " (without the quotes).
• Classic Macintosh OS users need to install the NCSA Telnet application, included on
the Netopia CD, or freely available from user groups or other freeware sources. Then
launch NCSA Telnet and type “ telnet 192.168.1.1 " (without the quotes).
The Telnet window displays the MM
MMaa aa iiiinn nn MM MMee ee nn nnuu uu
.
For Bridged or Routed 1483:
For PPPoE:
2.
The Netopia Router will then restart and your settings will take effect.
CC
CCoo oonn nngg ggrr rraa aa tt tt uu uullllaa aa tt tt iiiioo oonn nnss ss!!!!
Your installation is complete. You can now surf to your favorite Web sites
by typing an URL in your browser’s location box or by selecting one of your favorite Internet
bookmarks.
If you have any questions or encounter problems with your Netopia Router, contact your
service provider’s technical support helpdesk.
Answers to many frequently asked product-related questions are also available on-line at:
http://www.netopia.com/support
Configure Your Netopia Router
Netopia Router
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
In the Telnet screens,
move from field to field
with the arrow keys.
Select items with the
RR
RRee ee tt tt uu uurr rrnn nn key, and toggle
items with the TT
TT aa aa bb bb key
followed by RR
RRee ee tt tt uu uurr rrnn nn.
Select EE
EEaa aa ss ssyy yy SS SSee ee tt tt uu uupp pp and
press RR
RRee ee tt tt uu uurr rrnn nn.
ADSL Line Configuration
Trellis Coding Enabled: On
Fast Retrain Enabled: On
+-------------+
Wiring Type... +-------------+
Data Link Encapsulation... | PPP |
| RFC1483 |
Data Circuit VPI (0-255): +-------------+
Data Circuit VCI (32-65535): 35
PREVIOUS SCREEN NEXT SCREEN
The AA
AADD DDSS SSLL LL LL LLiiiinn nnee ee CC CCoo oonn nn-- --
ff
ffiiiigg gguu uurr rraa aa tt tt iiiioo oonn nn screen
appears.
If using PPPoE, choose
PP
PPPP PPPP PP from the Data Link
Encapsulation menu.
Make any other changes
that your ISP requires.
Select NN
NNEE EEXX XXTT TT SS SSCC CCRR RREE EEEE EENN NN
and press RR
RRee ee tt tt uu uurr rrnn nn.
Connection Profile 1: Easy Setup Profile
Underlying Encapsulation... None
RFC1483 Mode... Bridged 1483
Address Translation Enabled: Yes
IP Addressing... Numbered
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
PREVIOUS SCREEN NEXT SCREEN
Enter basic information about your WAN connection with this screen.
The EE
EEaa aa ss ssyy yy SS SSee ee tt tt uu uupp pp PP PPrr rroo oo-- --
ff
ffiiiillllee ee screen for RFC 1483
looks like this.
Make any other changes
that your ISP requires, or
leave the defaults.
Select NN
NNEE EEXX XXTT TT SS SSCC CCRR RREE EEEE EENN NN
and press RR
RRee ee tt tt uu uurr rrnn nn.
Connection Profile 1: Easy Setup Profile
Underlying Encapsulation... None
PPP Mode... VC Multiplexed
PPP Authentication... None
Address Translation Enabled: Yes
IP Addressing... Unnumbered
Remote IP Address: 127.0.0.2
Remote IP Mask: 255.255.255.255
PREVIOUS SCREEN NEXT SCREEN
Enter basic information about your WAN connection with this screen.
The EE
EEaa aa ss ssyy yy SS SSee ee tt tt uu uupp pp PP PPrr rroo oo-- --
ff
ffiiiillllee ee screen for PPPoE
looks like this.
If you chose PPPoE, you
can enter your User
Name and Password
here. Make any other
changes that your ISP
requires. Select NN
NNEE EEXX XXTT TT
SS
SSCC CCRR RREE EEEE EENN NN and press
RR
RRee ee tt tt uu uurr rrnn nn.
IP Easy Setup
Ethernet IP Address: 192.168.1.1
Ethernet Subnet Mask: 255.255.255.0
Domain Name: isp.com
Primary Domain Name Server: 0.0.0.0
Secondary Domain Name Server: 0.0.0.0
Default IP Gateway: 0.0.0.0
IP Address Serving: On
Number of Client IP Addresses: 100
1st Client Address: 192.168.1.100
PREVIOUS SCREEN NEXT SCREEN
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
The IIIIPP
PP EE EEaa aa ss ssyy yy SS SSee ee tt tt uu uupp pp
screen appears.
You can enter your
DD
DDoo oomm mmaa aa iiiinn nn NN NNaa aa mm mmee ee and
DNS Server(s) here.
Make any other changes
that your ISP requires.
Select NN
NNEE EEXX XXTT TT SS SSCC CCRR RREE EEEE EENN NN
and press RR
RRee ee tt tt uu uurr rrnn nn.
Easy Setup Security Configuration
It is strongly suggested that you password-protect configuration access
to your
Netopia. By entering a Name and Password pair here, access via serial,
Telnet and Web Server will be password-protected.
Be sure to remember what you have typed here, because you will be prompted
for
it each time you configure this Netopia.
Write Access Name:
Write Access Password:
PREVIOUS SCREEN TO MAIN MENU RESTART DEVICE
Configure a Configuration Access Name and Password here.
The EE
EEaa aa ss ssyy yy SS SSee ee tt tt uu uupp pp
SS
SSee ee cc ccuu uurr rriiiitt tt yy yy CC CCoo oonn nnff ffiiiigg gguu uurr rraa aa -- --
tt
tt iiiioo oonn nn screen appears.
Enter a name and pass-
word that will limit
access to the Router’s
configuration screens.
Select RR
RREE EESS SSTT TT AA AARR RRTT TT
DD
DDEE EEVV VVIIIICC CCEE EE and press
RR
RRee ee tt tt uu uurr rrnn nn.
4 5 6
NN
NNee ee tt tt oo oopp ppiiiiaa aa PP PPaa aa rr rrtt tt NN NNuu uumm mmbb bbee ee rr rr:: ::
6180077-00-02
Copyright 2005, Netopia, Inc. Netopia and the Netopia logo are registered trademarks
belonging to Netopia, Inc., registered U.S. Patent and Trademark Office. Broadband Without
Boundaries is a trademark belonging to Netopia, Inc. All other trademarks are the property
of their respective owners. All rights reserved.