netta JS-55B User manual

400W
JIG SAW
---------------------------------------------------------
EN USER INSTRUCTION & OPERATION MANUAL
ES MANUAL DE INSTRUCCIONES Y OPERACIONES PARA EL
USUARIO
DE BENUTZERANLEITUNG & BETRIEBSANLEITUNG
FR MANUEL D'UTILISATION ET D'UTILISATION
IT ISTRUZIONI PER L'USO E MANUALE OPERATIVO
VOLTAGE
230V
RATED
POWER
400 W
FREQUENCY
50 Hz
NO-LOAD
SPEED
3300/min
EN

Thank you for purchasing this NETTA product.
Please read the user manual carefully before operating this appliance.
We will update our instruction manuals if necessary.
For the most up-to-date user manual, please visit our official website:
www.nettadirect.com.
You can download a copy of up to date user manuals at any time in
electronic format. We do not supply you with a paper-based user
manual after each revision.
Require a larger version of this
Instruction Manual?
Please download electronically from
our website and use PDF reader on
your device to enlarge the text if
needed.
www.nettadirect.com

SAFETY & WARNINGS
INTENDED USE
NETTA Design is for domestic and indoor
use only. This product is not intended for
use by people who have lack of experience
and knowledge or have reduced ability, or
sensory and metal capabilities. Keep
supervised when groups of people use this
item.
REGULAR CHECKUPS
•Check cables every time
before plugging into a
socket, make sure power
cables are not burst or
snapped and that the power-
plug has no damage.
•Check all the knobs are
functional correctly.
GENERAL CAUTIONS
•Always follow this instruction manual and go through all the safety
checks.
•This is not toy - do not let children play with it.
•DO NOT modify this product in any way.
•Keep work areas clean and well lit.
•Do not operate tools in explosive atmospheres.
•Before using an electric powered appliance, check the rating label and
voltage information on this manual, or the rating label on back of the
machine.
•This product wattage is 400W, ensure this device is connected to a power
socket.
•Always connect the device to a socket with Residual Current Device
(RCD) fitted with your home circuits.
•If you are unsure, please seek a certified election for advice.
•The appliance must not be immersed in liquid.
•Do not use power tools in wet or damp conditions.
•Do not overload your power tools. Match each tool to the task.
•Do not use any power tool if the on/off switch is damaged.
•Check that the moving parts of your tool operate smoothly and are not
cracked or damaged.
•The cutting parts must be sharp and kept clean.

RISK OF PERSONAL INJURY
.
•DO NOT use the appliance other than for the intended use.
•Use personal protective equipment. Always use eye protection.
•Use ear protection.
•Do not wrap the device in a cloth or other material to suppress
noise. This will hinder the proper ventilation of the device. This
could ignite a fire and cause burns.
•Wear soft gloves when using this tool to prevent discomfort.
•Hold the power tool firmly to reduce the vibration levels.
•Ensure the switch is in the off position before connecting to a power
source, picking up or carrying the tool.
•Remove any adjusting keys or wrenches before turning the tool on.
•Do not overreach. Keep proper balance at all times.
•Do not wear loose clothing or jewellery.
•Take a break if you feel vibration-related discomfort.
•DO NOT operate any appliance with a damaged cord or plug or
after the appliance malfunctions or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility
for examination, repair or electrical or mechanical adjustment.
•If the supply cord is damaged it must be replaced by the
manufacturer or an authorized service agent or a qualified
technician in order to avoid a hazard.
•The use of accessories is not recommended by the manufacturer
as they may cause injuries to persons.
•Do not let the cord hang over the edge of a table or counter or
touch a hot surface.
•Do not place on or near a hot gas or electric burner or in a heated
oven.
•Unplug from outlet when not in use and before cleaning.

ASSEMBLE THE PRODUCT
Blade installation/uninstall
1. Make sure that the device is
disconnected from the power source.
2. Select the blade depending on the
material to be sawed.
3. Lift the plastic cover.
4. Press and twist the blade socket
clockwise with the thumb of one hand
and insert the blade with the other
hand.
5. The blade must be directed away from
the device.
6. Release the blade socket so that it
turns back automatically to the
previous position.
7. Pull the blade to check if it is
installed correctly.

OPERATING THE PRODUCT
Turning the Device On/Off
1. To turn the device on or off, press the on/off switch.
Attention! After turning the device off, the blade continues
to move –be careful.
On/off switch lock
To lock the on/off switch, press it, and then press the on/off switch lock
button.
To unlock the on/off switch, press it again.
Stroke rate adjuster
It is possible to adjust the blade stroke rate. Rotate the stroke rate
adjuster to select one of the settings from 1 to 6.
Guide foot plate bevel adjustment
To adjust the guide foot plate bevel, unscrew two Allen screws on the
bottom of the device using the Allen key (included).
The jigsaw with laser can be set at 45, 30, 15 and 0 degrees. The base
has teeth which
facilitate its locking.
For this reason, when
adjusting, move the
base slightly
backward, set the
required bevel, and
then slide it forward to
lock. Screw the Allen
screws back.

Blade pendulum action adjustment
It is possible to adjust the blade pendulum action in the range from 0 to
3. At "0", the blade will not perform additional pendulum action forward,
which allows for easier cutting. At "3", the pendulum action will be the
highest. Adjust the blade pendulum action depending on the hardness
of the material being sawed. You can cut soft materials more
aggressively by setting the blade pendulum action
adjuster to "3".
Installation of the parallel guide.
WARNING! Before assembly or installation of
accessories to make sure that the
tool is switched off and unplugged.
1. For repeated, equal to the cutting width of
150mm, you can use
the parallel guide (16) with the centimeter
scale. It will provide fast performance, even
and clean cut.
2.The rip fence mounted in a rectangular
opening on the side of the base stop downward. Push the guide to the
desired position defining an adequate cutting width as in the picture
above. Tighten the alien screws using the Allen wrench included with
the kit to secure the track in place.

Installation /removal of the connector for workshop vacuum
tubes
The connector for workshop vacuum tubes - or adapter - allows the
user to maintain a clean working environment, by allowing the
connection of the power tool to a workshop vacuum.
The adapter must be connected to a vacuum, which will be resistant to
dust generated during the processing of different materials.
The connector for dust extraction (15) should be put onto the sawdust
exhaust channel (6). When installing - the detents, which are placed in
the connector, should be inserted into the perforations made in the
channel.
The adapter must be turned in the clockwise direction - as seen from
the back of the unit –securing the connector in place. After the
installation of the connector the vacuum cleaner suction pipe may be
plugged in. which is resistant to dust created from different materials.
Make sure that the vacuum cleaner is turned on to ensure that dust
and shavings produced during power operation will be absorbed.
To remove the connector (15), first unplug the vacuum cleaner tube
and turn the
connector counterclockwise (viewed from the rear of the tool) and
remove it
from the exhaust channel (6).

CLEANING & STORAGE
Correct and regular cleaning will improve the safety and extend the
lifespan of the device.
Warning! Turn the device until it cools down before off,
disconnect it from the mains and wait cleaning or
maintenance to avoid burns.
Protective features, ventilation openings and the motor
housing should always be free from dust and other contamination.
Wipe the device with a damp cloth or blow it down with low-pressure
compressed air.
It is recommended that you clean the device immediately after every
use.
Protect the interior of the device from water penetration.
Do not immerse the device or parts of it in water or other prisms.
The cutting parts must be sharp and kept clean. Properly maintained
cutting elements that are properly sharpened, adhere better to the
surface and provide better cutting control.
Attention!
Do not use any chemical, alkaline, abrasive or disinfecting
substances to clean the device, as they can damage its
surfaces.

SPARE PARTS/REPAIR
We hope our products will last as long as possible to reduce the build-
up of electrical waste in the world.
If any consumable parts need replacing, please check our website for
stock availability and purchase.
If our website does not have the parts listed, but you still need
consumable parts, please contact our customer support to check
availability and process your order.
To order replacement parts, please go to www.nettadirect.com/parts.
You will need PDC information from your product, user manual or
carton box. Alternatively, go to our website and use search bar to find
the parts available. You can also find this code on the back of this User
Manual.
For our Repair Service, please contact our customer support with email
on [e-mail] they will provide with more details of
repair service with NETTA.
DISPOSAL OF PRODUCT
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
DISPOSAL:
Please dispose of this product responsibly. This item cannot be
disposed of with general waste. Please contact your local
council authority for more information on how to dispose this
product. If this product is disposed of with general waste, it will
end up in a landfill and will leak hazardous substances into the
groundwater –effecting our food chain.

YOUR WARRANTY
If you purchased with NETTADIRECT, or one of our authorised resellers, you
will automatically enrol your warranty for 1 (ONE) year. You don’t need to
register again for your warranty. All warranties will be carry out our terms and
conditions include warranty conditions you will find out from our website at
www.nettadirect.com.
PLEASE NOTE: Consumable parts will not be covered by warranty. If a
consumable part needs replacing, you need purchase separately from our
website. Please quote with your original proof of purchase (invoice) and name
or delivery address, postcode, so we can locate you when you contact us for
warranty.
COPYRIGHTS
NETTA and its logo including images and contents in this manual and website
is copyrighted. All intellectual property rights belong to NETTA owner
CONSUMABLE DIRECT LIMITED.
ANY UNAUTHORISED USE, MODIFICATION or DISTRIBUTION of the
NETTA logo, website image, and its contents (from website, manuals) will
violate worldwide copyright, trademark and associated laws.
We reserve the right to proceed with lawsuits to anyone who is found
breaching our copyrights policy. For more details, please check our website
copyright policy for more information.
PRODUCT DEPENDENCY CODE (PDC)
Your PDC is below:
NETTA is a registered trademark of CONSUMABLE DIRECT LIMITED.
Product Produced for CONSUMABLE DIRECT LIMITED M32 0JT U.K.
Printed in China
PDC: JS-55B
SKU:103706