netta JS-HG12A II User manual

2000W
HEAT GUN
---------------------------------------------------------------------------------------------------
EN USER INSTRUCTION & OPERATION MANUAL
ES MANUAL DE INSTRUCCIONES Y OPERACIONES PARA EL
USUARIO
DE BENUTZERANLEITUNG & BETRIEBSANLEITUNG
FR MANUEL D'UTILISATION ET D'UTILISATION
IT ISTRUZIONI PER L'USO E MANUALE OPERATIVO
AIR FLOW
250-550 Litres
Per Minute
WATTAGE
2000W
POWER CABLE
1.8M
TEMPERATURE
350-550℃
EN

Thank you for purchasing this NETTA product.
Please read the user manual carefully before operating this
appliance.
We will update our instruction manuals if necessary.
For the most up-to-date user manual, please visit our official
website: www.nettadirect.com.
You can download a copy of up to date user manuals at any time
in electronic format. We do not supply you with a paper-based
user manual after each revision.
Require a larger version of this
Instruction Manual?
Please download electronically from
our website and use PDF reader on
your device to enlarge the text if
needed.
www.nettadirect.com

Safety and Warnings
Intended Use
NETTA Design is for domestic and
indoor use only. This product is not
intended for use by people who have
lack of experience and knowledge or
have reduced ability, or sensory and
metal capabilities.
Safety Warnings
Non-observance of the safety rules while working with the hot air tool
can lead to fire, explosion, electric shock or burns. Read and save the
operating instructions before using the tool and always observe the
safely rules.
A damaged casing or an opened unit can lead to a hazardous electric
shock. Do not open the unit or put a damaged unit into operation. Do
not drill into the casing e.g. to attach a company label.
A damaged power cord can lead to an electric shock. Check the power
cord regularly. Do not operate the unit when the power cord is
damaged. Do not wrap the cord around the unit and protect it from oil,
heat and sharp edges. Do not carry the unit by the cord and do not use
the cord to pull the plug from the outlet.
Do not work in the rain, in moist or wet environments. This can lead to
an electric shock. Keep the unit dry. Avoid body contact with grounded
cables or surfaces, such as pipes, radiators, ranges and refrigerators.
Danger of explosion! The hot air tool can explosively ignite combustible
fluids and gases. Do not work in a potentially explosive environment.
Check the surroundings before starting any work. Do not work on fuels
or gas containers or in their vicinity, even when they are empty.
Regular Check-Ups
Ensure the power cable and
plug are not damaged before
plugging into a socket.
Check the switch is
functioning correctly.

Safety Warnings
Danger of fire! Heat can reach combustible materials that are hidden
behind coverings, in ceilings, floors or cavities, and ignite them. Inspect
the work area before starting to work and in case of doubt, abstain from
using the hot air tool. Do not point the unit at the same spot for
extended periods.
Danger of fire! Unsupervised operating of the hot air tool can set fire to
objects that are close by. The unit must be supervised at all times
during operation. When allowing the switched off unit to cool down,
always place it standing up vertically. Allow the unit to cool down
completely.
Danger of fire! When working plastics varnish or similar materials,
gases develop that are easily inflammable and can lead to explosions.
Be prepared for flames to develop and keep suitable fire-extinguishing
means at hand.
Danger of intoxication! When working plastics, varnish, or similar
materials, gases develop that can be aggressive or toxic. Avoid
breathing in vapours, even when they appear to be harmless. Always
provide for good ventilation of the work area and wear a respirator.
Danger of injury! The hot air jet can injure persons or animals.
Touching the hot tube of the heating element or the nozzle leads to
skin burns. Keep children and other persons away from the unit. Do not
touch the tube of the heating element or the nozzle when they are hot.
Do not use the unit as a hair dryer. It develops much more heat than a
hair dryer. Do not use the unit to heat up fluids or to dry objects or
materials that are destroyed through the influence of hot air.
Unintentional starting or unexpected switching on of the heating
element after actuation of the thermal relay can lead to injuries. Make
sure that the switch is set to OFF when connecting the unit to the
mains supply. Switch OFF when the thermal relay has actuated.
Danger of injury and fire. The hot air tool is dangerous for children.
Keep the hot air tool out of the reach of children.

Safety Warnings
Danger of injury! Using an air flow reflection nozzle that is not suitable
for your unit can lead to burns. Use only original accessories for your
model that are listed in these operating instructions.
Danger of lead overheating! Incorrect handing can lead to an
accumulation of heat and thus damage the unit. Do not operate the unit
when it is placed down horizontally or when pointed downward. The air-
intake opening and the nozzle must not be covered. Use only nozzles
that are suitable for your unit.
Technical Data
Intended Use
This unit is highly versatile electric heat gun which can be used for
many different applications, such as: removal of paint, defrosting metal
water pipes, forming and welding plastic, reducing heat shrinking tubes
and soldering.
The heat gun has two settings:
1. Low Heat –For use where the work surface or surrounding area
must not get too hot.
2. High Heat –For a faster heat up time of the work surface where
you can also operate the gun at a greater distance.
Model
JS-HG12AⅡ
Voltage
(V)
220-240
Frequency
(Hz)
50
Power
(W)
2000
Switch position
0-1-2
Temperature
position
1
2
℃
350
550
Protection class
Ⅱ/ double insulated

Operating the Product
Ensure that the voltage of the power source matches the value given
on the nameplate of the unit.
To Switch the Tool On
Set the switch to ‘|’ or ‘| |’, depending on your use of the tool.
To Switch the Tool Off
Set the switch to 0.
Tip for Removing Paint
Do not heat the paint for too long as this will burn the paint, making it
difficult to remove.
Starting with the low heat setting, move the gun slowly backwards and
forwards until the paint blisters and bubbles.
Immediately remove the paint with a scraper or shave hook.
Aim to heat the paint just ahead of the scraper so that you can develop
a continuous action.
Maintenance
Always pull the power plug before cleaning.
Always keep the ventilation slots clean.
If the unit should fail, please contact your supplier. Repairs should only
be carried out by authorized and qualified service agents.

Spare Parts and Repairs
To order replacement parts, please go to www.nettadirect.com/parts.
You will need PDC information from your product, user manual or
carton box. Alternatively, go to our website and use search bar to find
the parts available.
You can also find this code on the back of this User Manual.
For our Repair Service, please contact our customer support with email
on [e-mail] they will provide with more details of
repair service with NETTA.
Disposal of Product
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF
THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
DISPOSAL:
Please dispose of this product responsibly. This item cannot be
disposed of with general waste. Please contact your local
council authority for more information on how to dispose this
product. If this product is disposed of with general waste, it will
end up in a landfill and will leak hazardous substances into the
groundwater –effecting our food chain.
Your Warranty
If you purchased with NETTADIRECT, or one of our authorised
resellers, you will automatically enrol your warranty for 1 (ONE) year.
You do not need to register again for your warranty. All warranties will
be carried out to our terms and conditions including warranty conditions
you will find out from our website at www.nettadirect.com.

Copyrights
NETTA and its logo including images and contents in this manual and
website is copyrighted. All intellectual property rights belong to NETTA
owner CONSUMABLE DIRECT LIMITED.
ANY UNAUTHORISED USE, MODIFICATION or DISTRIBUTION of
the NETTA logo, website image, and its contents (from website,
manuals) will violate worldwide copyright, trademark and associated
laws.
We reserve the right to proceed with lawsuits to anyone who is found
breaching our copyrights policy. For more details, please check our
website copyright policy for more information.
Product Dependency Code (PDC)
Your PDC is below:
NETTA is a registered trademark of CONSUMABLE DIRECT LIMITED.
Product Produced for CONSUMABLE DIRECT LIMITED M32 0JT U.K.
Printed in China
PDC: JS-HG12AII
SKU: 103952