NEURONIC NEURADIANT 1070 User manual

Remove the helmet and
components from the
case. Take the velcro
strips from the adhesive
paper and apply onto the
inside of the helmet as
shown in the diagram.
Apply the sponges or
foam headpiece onto the
velcro so the unit is tted
during use.
Do not place any velcro
on the clear plastic
inside the helmet.
Fitting Guide
Connect the helmet with
the controller, connect the
controller with the rst
power adapter.
Turning on the Device
Thank you for purchasing the
Neuradiant 1070.
First
Adapter
Second
Adapter
Connect the controller with
the second power adapter.
After connecting the cables,
you can turn on the device
via the button on the top
right.
Sponges Foam
Headpiece
Velcro
Bottom View

It’s recommended to use it morning and
evening, just like brushing your teeth!
Selecting a Program
Select one of our 4
programs as shown above
for general wellness.
To be used when instructed by a
clinician. Contact us at
te[email protected] for more
information.
Custom Program:
Our product cannot guarantee the same effects on each
individual. There are no known side effects of using our
device. Still, we advise you to consult us or your local
doctor and conduct your independent research before
using the device.
Please note this is not a medical device, we do not
claim to treat, cure, prevent or diagnose diseases.
For more information about us, the device,
the science and much more please visit our
website at neuronic.online
Starting a Program
Now that you have
selected your
program, click
the start button
when the helmet
is placed on your
head.
Clinical Protocol Passcode:
Note: Only available with 4 quadrant device.