Furniture of America CM6471-LV User manual

The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 7
(Not Included)
Philips
Screwdriver
TOOLS REQUIRED
Furniture of America MODEL #
Questions?
CM6471-LV
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)
VERSION # 22-02-21
2 - People
Recommended

2 / XXXXXXX7
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX7
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / 7

5 / 7
PARTS
HARDWARE
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
CM6471-LV
1pc
# 1 1pc
# 2
SSSSSSSSSSSS
Saet Panel
Bac Rest
1pc
# 3
Front Rail Support
1pc
# 4
Arm Rest (Left)
1pc
# 5 1pc
# 6 1pc
Arm Rest (Right) Back Cushion
#7
Seat Cushion
4pcs
Bolt 1/4" x 2-3/8"
2pcs
Bolt 1/4" x 3-9/16"
# bB 2pcs
Lock Washer M6
# bC 6pcs
# bD
Flat Washer M6
2pcs
#E
Barrel Nut M6
6pcs
#F
Csk Screw M4x32mm
6pcs
#G
Wood Dowel 10x30mm
1pc
#H
LOVESEAT
Back
Seat

6 / 7
1
2
Part
Hardware
XXx1pc
# 1
Part
XXx1pc
# 3
Part
XXx1pc
# 5
XXx2pcs
# A
Hardware
XXx1pc
# B
Hardware
XXx1pc
# C
Hardware
XXx3 pcs
# D
Hardware
XXx1pc
Hardware
XXx3 pcs
#E
#G
Hardware
Part
XXx1pc
# 4
XXx2pcs
# A
Hardware
XXx1pc
# B
Hardware
XXx1pc
# C
Hardware
XXx3 pcs
# D
Hardware
XXx1pc
Hardware
XXx3 pcs
#E
#G
INSIDE VIEW
RIGHT
STICKER
Remark:
Position Up
#1 #5
#3
#B
#D #4 & #5
#3
#H
#H
#A
#C
#D
#G
#4 & #5
X1
X1
X2
#1
#4&#5
#G #D
#A #H
X1
X1
R
#1
#4&#5
#G #D
#A #H
X1
X1
INSIDE VIEW
#B
#D #4 & #5
#3
#H
#H
#A
#C
#D
#G
#4 & #5
X1
X1
X2
#4
LEFT
STICKER
1) Insert dowel (#G) and nut (#E) to the holes of
the back rest (#1), then align back rest (#1) to
arm rest (#4,5). Secure by using bolts (#A) with
washers (#D).
2) Align back rest (#1) to arm rest (#4,5), then
secure by using bolts (#B) with washers (#D).
3) Insert dowels (#G) to
rail (#3), then align rail
(#3) to arms (#4,5).
Secure by using bolts
(#A) with washers
(C,D).
Follow the same steps with the other arm!

7 / 7
3
4
Hardware
Part
XXx1pc
# 2
XXx6pcs
# fF
Part
XXx1pc
# 6
Part
XXx1pc
#7
X6
#F
#2
#2
#6
#7
Align seat panel (#2) to frame, then secure
by using screws (#F).