New Air NWC016SS00 User manual

16 Bottles Freestanding
Wine Cooler
NWC016SS00
OWNERS MANUAL
Read and save these instructions.
Manual v1.0

2
newair.com
READ AND SAVE THESE INSTRUCTIONS.
TABLE OF CONTENTS
Register Your Product Online............................................................................... 3
Safety Information & Warnings ........................................................................... 4
Assembly & Installation ....................................................................................... 5
Operating Instructions ......................................................................................... 6
Cleaning & Maintenance...................................................................................... 8
Troubleshooting................................................................................................... 9
Limited Manufacturer’s Warranty ..................................................................... 10
SPECIFICATIONS
MODEL NO.
NWC016SS00
V
OLTAGE
:
110-120V
CURRENT:
1.3A
F
REQUENCY
:
60Hz
P
OWER
C
ONSUMPTION
:
85W
B
OTTLE
C
APACITY
:
16 bottles
STORAGE CAPACITY:
1.6 cu. ft.
TEMPERATURE RANGE:
39°F - 65°F
REFRIGERANT:
R600a

3
newair.com
REGISTER YOUR PRODUCT ONLINE
Register Your NewAir Product Online Today!
Take advantage of all the benefits product registration has to offer:
Service and Support
Diagnose troubleshooting and service issues faster and more
accurately
Recall Notifications
Stay up to date for safety, system updates and recall notifications
Special Promotions
Opt-in for NewAir promotions and offers
Registering your product information online is safe & secure and takes less
than 2 minutes to complete:
Alternatively, we recommend you attach a copy of your sales receipt below and
record the following information, located on the manufacturer’s nameplate on
the rear of the unit. You will need this information if it becomes necessary to
contact the manufacturer for service inquiries.
Date of Purchase: ___________________________________________
Serial Number: ____________________________________________
Model Number: ____________________________________________
newair.com/register

4
newair.com
SAFETY INFORMATION & WARNINGS
When using any electrical appliance, basic safety precautions
must be followed in order to reduce the risk of fire, electrical
shock and/or injury to persons or property. Be sure to read all
instructions before using this appliance and observe the
following safety tips:
Shock Hazard - Electrical Grounding Required
•Never attempt to repair or perform maintenance on the unit until the
electricity has been disconnected.
•Never remove the round grounding prong from the plug and never use a
two-prong grounding adaptor.
•Altering or cutting the power cord, removing the power cord, and removing
the power plug or direct wiring can cause serious injury, fire, and loss of
property and/or life, and will void the warranty.
•Never use an extension cord to connect power to the unit.
•Avoid operating this fridge in excessively moist or humid environments.
Important Precautions:
•Do not lift the unit using the door handle.
•Never install or operate the unit inside cabinets or without proper
clearances.
•Failure to clean the condenser every six months can cause the unit to
malfunction.
•Allow the unit temperature to stabilize for 24 hours before use.
•Do not block any internal fans.
•Keep the fridge away from hazardous materials or combustible/flammable
substances.
•Use only genuine supplier's replacement parts. Imitation parts can damage
the unit, affect its operation or performance, and may void the warranty.
Attention: Child Entrapment Risk!
To prevent the risk of child entrapment, do not allow children to operate,
play with, or crawl inside the unit. If the unit will not be used for an
extended period of time, remove the door and leave the shelves in place so
that children cannot crawl inside. Also remove the door when disposing of
the unit.

5
newair.com
ASSEMBLY & INSTALLATION
Before connecting the appliance to a power source, let it stand upright
for approximately 24 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
This fridge is a freestanding unit and should not be built into surrounding
cabinetry. Allow for proper air clearance around the fridge. The recommended
clearances are as follows:
Sides: ¾" (19 mm)
Top: 4" (100 mm)
Back: 2" (50 mm)
Before operating your fridge for the first time, follow these steps:
1. Clean the interior surface of the unit with lukewarm water and a soft cloth.
2. Place the fridge on a level surface that will be strong enough to support
the unit when it is fully loaded. To level your fridge, adjust the front feet
located at the bottom of the unit.
3. Install the fridge away from direct sunlight and heat sources such as
stoves, heaters, or radiators. Direct sunlight may affect the unit's acrylic
coating, and nearby heat sources can increase electrical consumption.
Extreme cold or hot ambient temperatures may also prevent proper
performance.
4. Once the fridge is plugged in, let the fridge run for at least 30 minutes
before stocking. Do not change the temperature or adjust any settings
during this time.
WARNING: placing beverages up against the back panel of the fridge could
cause cans or bottles to rupture due to excessively low temperatures. Always
allow room for air circulation between the back panel and any drinks.

6
newair.com
OPERATING INSTRUCTIONS
CONTROL PANEL
Your unit may be provided with a lock and key.
The keys are located inside the plastic bag that contains the User Manual.
Insert the key into the lock and turn it counterclockwise to unlock the door. To
lock the door, do the reverse operation, making sure the metal pin is engaged
completely. Remove the key and put it in a secure place for safekeeping.
After turning on the fridge, the LED display will show the ambient temperature
first, and then the internal cabinet temperature.
Press the "light" button to turn the interior lighting on and off. Use the up and
down arrows to adjust the temperature. The interior temperature can be
adjusted in increments of 1 degree between 39°F and 65°F.
After you set the desired temperature, this set temperature will flash for 5
seconds on the display and then revert back to displaying the current internal
temperature.
Select the temperature display setting to display in Fahrenheit or Celsius.
OPTIMIZING PERFORMANCE
•To ensure maximum performance and efficiency, be sure to place your
fridge in an area where there is proper air circulation. (See Installation
instructions above for proper clearances.)
•For proper internal air circulation, do not overfill your fridge. When storing
beverages, keep them away from the rear wall. To allow free circulation of
cold air, don't pack beverages too tightly on the shelves.

7
newair.com
•Do not place the unit in direct sunlight.
•Do not place heated beverages or food in your fridge.
•Do not store perishable food in your fridge. The unit's interior temperature
may not be low enough to prevent spoilage.
•Do not place heavy objects on top of the fridge.

8
newair.com
CLEANING & MAINTENANCE
CLEANING YOUR FRIDGE
To clean your fridge:
•Unplug the unit and remove anything inside.
•Wash the inside of the unit with a solution made of warm water and neutral
detergent. Do not use abrasive cleaners.
•Use mild, soapy water to clean the door gasket.
•To ensure efficient operation, thoroughly clean the back and bottom of the
fridge.
•To clean the outside of the unit, use a mild detergent and warm water.
DEFROSTING YOUR FRIDGE
To prevent ice buildup on the inside of the fridge, it may be necessary to
defrost occasionally:
1. Increase the temperature to 65 degrees.
2. Wait 30 to 60 minutes.
3. Clean up any melted frost from the bottom of the unit.
4. Change temperature back to desired level.
If you notice an excess amount of frost buildup inside the unit, follow these
steps to remove it:
1. Unplug the fridge.
2. Allow frost to melt from the inside of the fridge, with the door open. If
necessary, use a plastic/rubber utensil to scrape ice from the interior
surface.
3. Dry thoroughly before plugging it in again.
MOVING YOUR FRIDGE
•Remove anything stored inside, and remove any frost buildup.
•Securely tape down all loose parts located inside the unit.
•Turn the leveling feet up to the base in order to avoid damage.
•Tape the door shut.
•Be sure the fridge stays in an upright position during transportation.

9
newair.com
TROUBLESHOOTING
Problem
Possible Causes
Solution
The fridge does
not cool.
•
The unit may be plugged in
using a different voltage.
•The circuit breaker may be
tripped or there is a blown
fuse.
•
Check if using the wrong
voltage.
•Reset the circuit breaker or
check for a broken fuse.
The fridge is not
cold enough.
•
The external environment
may require a higher setting.
•The fridge may be placed too
close to a heat source.
•There is insufficient
ventilation.
•The door is not completely
closed or the door seal is not
working properly.
•
Lower the temperature of
the fridge.
•Keep the fridge away from
direct sunlight or other heat
sources.
•Place the fridge in an area
with proper ventilation and
clearances.
•Close the door tightly. Do
not open the door
frequently and do not keep
the door open for extended
periods of time. Replace the
seal on the door if
necessary.
The fridge seems
to make too much
noise.
•
The fridge is not leveled.
•There is insufficient
ventilation. The fridge is too
close to a wall or another
surface.
•
Adjust the feet and ensure
the fridge is level.
•Allow sufficient clearance
around the fridge.
An interior red
light is flashing.
•
The set temperature is too
low.
•
Adjust the set temperature
so that it is higher than the
interior temperature of the
fridge
Frost is building
up in the fridge.
•There is excess humidity or
the interior temperature is
too low.
•Turn off the fridge, unplug
it, and remove the frost
buildup manually.
•Reconnect the power once
the ice has thawed.

10
newair.com
LIMITED MANUFACTURER’S WARRANTY
This appliance is covered by a limited manufacturer’s warranty. For one year from the
original date of purchase, the manufacturer will repair or replace any parts of this
appliance that prove to be defective in materials and workmanship, provided the
appliance has been used under normal operating conditions as intended by the
manufacturer.
Warranty Terms:
During the first year, any components of this appliance found to be defective due to
materials or workmanship will be repaired or replaced, at the manufacturer’s discretion,
at no charge to the original purchaser. The purchaser will be responsible for any
removal or transportation costs.
Warranty Exclusions:
The warranty will not apply if damage is caused by any of the following:
•Power failure
•Damage in transit or when moving the appliance
•Improper power supply such as low voltage, defective household wiring or
inadequate fuses
•Accident, alteration, misuse or abuse of the appliance such as using non-
approved accessories, inadequate air circulation in the room or abnormal
operating conditions (extreme temperatures)
•Use in commercial or industrial applications
•Fire, water damage, theft, war, riot, hostility or acts of God such as hurricanes,
floods, etc.
•Use of force or damage caused by external influences
•Partially or completely dismantled appliances
•Excess wear and tear by the user
Obtaining Service:
When making a warranty claim, please have the original bill of purchase with purchase
date available. Once confirmed that your appliance is eligible for warranty service, all
repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be
responsible for any removal or transportation costs. Replacement parts and/or units will
be new, re-manufactured or refurbished and is subject to the manufacturer’s discretion.
For technical support and warranty service, please email [e-mail].