Nexa NE-310 Manual

Edit Department Settings
Change mode key to Program
Select Sales Programming
Press CASH <Enter> Button
Arrow down to Department
Press CASH <Enter> Button
Enter Dept Number - 1 to 99
Press Dept# Button
OR
Press No Sale <Next> to step to next Department
DEPARTMENT NAME
Press CASH
Enter Name with numeric keys( characters are printed on top of keys)
Press appropriate key till character is appears on mini display
Eg. Pressing 8 once shows “A” twice shows “B”
Press [.] button to confirm character
Repeat until all characters have been selected(up to 12 characters)
Press CASH
PRICE & DEPT GROUP LINK
Arrow down to select setting
Enter value with numeric keys
Press CASH
FLAG SETTINGS
Arrow down to select setting
Arrow right or left to change setting
PROMPT DATA TYPE DESCRIPTION OPTIONS
NAME CAPTION Name of a dept 12 Digits
DP GROUP LINK VALUE Link group No. 2 Digits
PRICE VALUE Unit Price 7 Digits
PRICE TYPE FLAG Price type setting Open, Normal, Preset
SIGN FLAG Positive/Negative
Price
PLUS, MINUS
TYPE FLAG Single item sale Standard, Single Item Sale
HALO FLAG Price limit No Limit, 0.99, 9.99, 99.99, 999.99
TAX STATUS FLAG TAX Status No Tax, GST, Tax 2, Tax 3, Tax 4
TAKE OUT TAX FLAG Take out TAX No Tax, Tax1, Tax 2, Tax 3, Tax 4
NE310 Quick Setup.doc - 3 -

Edit PLU Settings
Change mode key to Program
Select Sales Programming
Press CASH <Enter> Button
Arrow down to PLU
Press CASH <Enter> Button
Enter PLU Number
Press PLU# <RECORD> Button
OR
Press No Sale <Next> to step to next PLU
OR
Scan barcode
PLU NAME
Press CASH
Enter Name with numeric keys( characters are printed on top of keys)
Press appropriate key till character is appears on mini display
Eg. Pressing 8 once shows “A” twice shows “B”
Press [.] button to confirm character
Repeat until all characters have been selected(up to 16 characters)
Press CASH
DEPARTMENT LINK
Arrow down to select setting
Enter value with numeric keys 1 to 99
Press CASH
Note - Must have dept link, setting dept link to 0 deletes the PLU data
PRICE 1&2
Arrow down to select setting
Enter value with numeric keys
Press CASH
NE310 Quick Setup.doc - 4 -

FLAG SETTINGS
Arrow down to select setting
Arrow right or left to change setting
PROMPT DATA TYPE DESCRIPTION OPTIONS
PLU NUMBER VALUE PLU No. 14 Digits
NAME CAPTION Name of a PLU 16 Digits
DEPT LINK VALUE Dept Link No. 2 Digits
PRICE 1 VALUE 1st Unit Price 7 Digits
PRICE 2 VALUE 2nd Unit Price 7 Digits
PRICE TYPE FLAG Price type setting Open, Normal, Preset
TAX STATUS FLAG TAX Status No Tax, GST, Tax 2, Tax 3, Tax 4
TAKE OUT TAX FLAG Take out TAX No Tax, Tax1, Tax 2, Tax 3, Tax 4
STOCK IN VALUE Stock Quantity 4 Digits (1-9999)
POP LIST LINK FLAG POP List Status NO>POS 1~5
NOTE:
1. If the Department Link is programmed as 0 value, this PLU shall be deleted
from the PLU file.
2. PRICE TYPE
NORMAL will permit only entering manual price when registering.
PRESET will not permit manual entry.
OPEN will accept any kind of price entry.
NE310 Quick Setup.doc - 5 -

Changing Receipt Message Header(LOGO message)
Change mode key to Program
Select Sales Programming
Press CASH <Enter> Button
Arrow down to HEADER MESSAGE or FOOTER MESSAGE
Press CASH <Enter> Button
Select line to change with arrow up/down buttons
Press CASH <Enter> Button
Enter Characters with numeric keys( characters are printed on top of keys)
Press appropriate key till character is appears on mini display
Eg. Pressing 8 once shows “A” twice shows “B”
Press [.] button to confirm character
Repeat until all characters have been selected(up to 24 characters)
NE310 Quick Setup.doc - 6 -