Nexans GigaSwitch V5 TP SFP-2VI 54VDC User manual

88303960 GigaSwitch V5 TP(PSE+) SFP-2VI 54VDC IND
88303965 GigaSwitch V5 TP SFP-2VI 54VDC IND
88303963 GigaSwitch V5 TP SFP-VI 230VAC IND

Generated 2021-11-17
Page 2/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Foreword
FOREWORD
Nexans Advanced Networking Solutions offers over 35 years of experience in research, development and production of
Fibre To The Office (FTTO) switches, Industrial Ethernet switches and network design. All key components are
designed and manufactured by Nexans in Germany to offer highest product quality and lifetime.
Nexans “Made in Germany” IT-networking solutions have proven their reliability in countless projects with over 1 million
user ports installed. As a market pioneer for Fibre To The Office Systems, Nexans has a strong R&D heritage based on
the principal of close customer centric product development and supports customers through all stages of even the
most complex projects with a dedicated support department.
Nexans Advanced Networking Solutions GmbH is part of Nexans headquartered in Paris and listed on Euronext Paris,
Compartment A with a main footprint on the European market.
A scalable and flexible IT infrastructure forms the basis for smooth operation and guarantees high-
performance network performance for today's and tomorrow's applications.
Purpose of this user manual
This manual describes the features, functions, operation and initial operation of the GigaSwitch V5 IND series. It may
include more than one product. Part of the content, e.g. some use cases or specifications, may only apply to some of
them. For more information on the exact feature set and specifications, see the product’s web page and datasheet.
Target group
Planners and installers, electrical engineers, persons entrusted with setting, testing and maintaining Ethernet switches.
Support
If you are not yet a registered user of Nexans Support Portal, please register at the Nexans support portal
https://www.nexans-ans.de/support/ and download the latest version of the firmware and the management tool. In the
Support Portal you will also find the related release notes and the current versions of management manual.
If you have any questions or problems, please contact us at the following support e-mail address:
[email protected].
In order to benefit from individualized and extended product support, we recommend concluding a Nexans support
contract. If you are interested, please send us your request by e-mail to [email protected].
Disclaimer
The content of this manual has been checked for compliance with the hardware and software described. Nevertheless,
deviations cannot be ruled out, so no liability is assumed for the complete agreement. The information in this manual is
reviewed regularly and any necessary corrections are included in subsequent editions. Suggestions for improvement
are welcomed. Technical changes are reserved, even without notice.
Further information can be found at www.nexans.de/LANsystems
Nexans Advanced Networking Solutions GmbH
Bonnenbroicher Str. 2-14
41238 Moenchengladbach
Germany
Tel: [phone]
E-Mail: [email protected]

Generated 2021-11-17
Page 3/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Table of Contents
TABLE OF CONTENTS
Foreword...........................................................................................................................................................................1
Table of Contents..............................................................................................................................................................3
EC Declaration of Conformity............................................................................................................................................4
Features and Benefits.......................................................................................................................................................5
Specifications....................................................................................................................................................................6
Dimensions.......................................................................................................................................................................9
Interface Description.......................................................................................................................................................10
Product Labels................................................................................................................................................................12
Safety Instructions...........................................................................................................................................................13
DIN-Rail Installation ........................................................................................................................................................14
Horizontal and Vertical Installation..................................................................................................................................15
Power Connection...........................................................................................................................................................17
Grounding.......................................................................................................................................................................19
Hardware Installation ......................................................................................................................................................20
Power over Ethernet .......................................................................................................................................................22
Memory Cards and Console Cable.................................................................................................................................24
LED Behavior..................................................................................................................................................................25
Start-up –Booting...........................................................................................................................................................26
Configuration- and Reset Button.....................................................................................................................................27
LANactive Manager.........................................................................................................................................................29
GigaSwitch Product List..................................................................................................................................................30
Accessories.....................................................................................................................................................................31

Generated 2021-11-17
Page 4/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
EC Declaration of Conformity
EC DECLARATION OF CONFORMITY
The manufacturer
Nexans Advanced Networking Solutions GmbH
Bonnenbroicher Strasse 2-14
41238 Moenchengladbach
Germany
declares under its sole responsibility that the products:
•88303960 GigaSwitch V5 TP(PSE+) SFP-2VI 54VDC IND
•88303965 GigaSwitch V5 TP SFP-2VI 54VDC IND
•88303963 GigaSwitch V5 TP SFP-VI 230VAC IND
following the provisions of directives
•2014/30/EU Electromagnetic Compatibility Directive
•2014/35/EU Low Voltage Directive
•2011/65/EU RoHS 2
to which this declaration relates are in conformity with the following directives and standards:
•EN 62368-1:2014: Audio/video, information and communication technology equipment - Part 1: Safety
requirements
•EN 55032:2012: Electromagnetic compatibility of multimedia equipment - Emission requirements
•EN 55024:2016: Information technology equipment - Immunity characteristics - Limits and methods of
measurement
•EN 61000-3-2:2104: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current
emissions
•EN 61000-3-3:2013: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16A
per phase and not subject to conditional connection
•EN 61000-6-2:2005: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard
for industrial environments
•EN 50581:2012: Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
The quality and environmental management system of Nexans Deutschland GmbH according to DIN EN ISO
9001:2000 and DIN EN ISO 14001:2005 ensures compliance with the European Directives and the fulfilment of the
relevant standards of the European standards bodies CEN, CENELEC and ETSI.

Generated 2021-11-17
Page 5/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Features and Benefits
FEATURES AND BENEFITS
LANactive Full Managed Gigabit Ethernet Switches
•Four user ports connecting end devices
•Up to three uplinks in various combinations
•Power over Ethernet (PoE+) with up to 30W output power
•Memory Card Slot
•Electrical connection for 54V DC or 230CV AC
Description
Nexans LANactive GigaSwitch V5 IND series is designed for the installation in industrial environments. The latest
generation of switches is equipped with a state-of-the-art network processor and provides enhanced performance,
security and redundancy functionality.
7 Port Version
The GigaSwitch version with seven ports is part of the latest V5 series. This special variant with three uplink ports
allows a redundant connection of the GigaSwitche via fibre optic. The RJ45 uplink can be used for connecting an
additional Wireless LAN Access Point. All uplinks support Link Aggregation for providing redundancy and double
bandwidth up to 2Gbps.
Snap-In Installation and DIN-Rail Installation
The very compact design of the GigaSwitch allows a tool-less snap-in installation into the standard 45 mm cable duct
systems or floor boxes without special mounting accessories. The special mounting clip allows also a DIN-Rail
installation.
Power over Ethernet
Up to 5x connected Ethernet devices can be supplied with Power over Ethernet. According to the latest IEEE 802.3at
(PoE+) standard, up to 30 watts per port are available for each connected device, with total budget of 150 watts.
Memory Card
The optional memory card automatically saves the complete current configuration and firmware of the device. In case
of failure, this feature allows an easy exchange of the hardware without additional configuration. In addition, each
memory card can be delivered with its own MAC address that is adopted by the switch.
Switch Management and Zero-Touch Configuration
Nexans LANactive Manager allows a simple and secure configuration of all device parameter of the GigaSwich series.
With the LANactive Manager a larger number of GigaSwitches can be managed and monitored at the same time. In
combination with Nexans Zero-Touch Configuration, the LANactive Manager allows automatic distribution of
configurations and firmware updates. A pre-configuration of the switches is not necessary.

Generated 2021-11-17
Page 6/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Specifications
SPECIFICATIONS
General Specifications
Ordering Information
GigaSwitch V5 TP(PSE+) SFP-2VI
54VDC IND
GigaSwitch V5 TP SFP-2VI
54VDC IND
Article Number
88303960
88303965
Interfaces
User Ports (RJ45)
4x 1000Base-T
Uplink Ports (SFP)
2x 100/1000Mbps
Uplink Ports (RJ45)
1x 1000Base-T
RJ45 Ports
Auto-Negotiation, MDI/MDI-X Auto-Cross Over and Auto-Polarity
Eco Mode for RJ45 Ports
Yes
Rotatable Head Module
Yes
Power over Ethernet
Number of PoE User Ports
4x PSE(PoE+) acc. to IEEE802.3at
Number of PoE Uplink Ports
1x PSE(PoE+) acc. to IEEE802.3at
-
PoE Mode
30W per Port, Mode A, Pin 1-2/3-6
Max. PoE power budget
150W
120W
Diagnostic Functions (Interfaces)
Digital Diagnostics Monitoring Interface
Yes
Twisted Pair Cable Diagnostic
Yes
General
Dimensions [W x H x D]
96mm x 45mm x 69mm
Installation Depth
35mm
Material
zinc diecasting / stainless steel
Colour
Pure White, like RAL 9010
Ambient Temperature
Operation: -25 ... 65°C, Storage: -25 ... 85°C
Relative Humidity
20 ... 90% (non-condensing)
Weight
290g
MTBF
> 750,000h
Power Supply
Input Voltage
46 … 57V DC (typ. 54V DC)
Power Consumption
4.9W (standby) … 5.3W (typ.) ... 6.5W (fully connected)
Heat Output
23Btu(IT)/h
Connector
3-pin connector with plug-in terminal (up to 2.5mm²) / (+) (-) (FPE)
CE - Conformity
Electro Magnetic Capability Directive
2014/30/EU

Generated 2021-11-17
Page 7/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Specifications
Low Voltage Directive
-
RoHS 2
2011/65/EU
Engineering Standards
EN 62368-1, EN 55032, EN 61000-6-2, EN 50581

Generated 2021-11-17
Page 8/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Specifications
Ordering Information
GigaSwitch V5 TP(PSE+) SFP-2VI 54VDC IND
Article Number
88303963
Interfaces
User Ports (RJ45)
4x 1000Base-T
Uplink Ports (SFP)
2x 100/1000Mbps
Uplink Ports (RJ45)
1x 1000Base-T
RJ45 Ports
Auto-Negotiation, MDI/MDI-X Auto-Cross Over and Auto-Polarity
Eco Mode for RJ45 Ports
Yes
Rotatable Head Module
Yes
Diagnostic Functions (Interfaces)
Digital Diagnostics Monitoring Interface
Yes
Twisted Pair Cable Diagnostic
Yes
General
Dimensions [W x H x D]
96mm x 45mm x 69mm
Installation Depth
35mm
Material
zinc diecasting / stainless steel
Colour
Pure White, like RAL 9010
Ambient Temperature
Operation: -25 ... 65°C, Storage: -25 ... 85°C
Relative Humidity
20 ... 90% (non-condensing)
Weight
290g
MTBF
> 750,000h
Power Supply
Input Voltage
85…240V AC (typ. 230V AC or 110V AC)
Power Consumption
2.8W (standby) … 4.3W (typ.) ... 5.5W (fully connected)
Heat Output
15Btu(IT)/h
Connector
3-pin connector with plug-in screw terminal (up to 1.5 mm²) / (L) (N) (PE)
CE - Conformity
Electro Magnetic Capability Directive
2014/30/EU
Low Voltage Directive
2014/35/EU
RoHS 2
2011/65/EU
Engineering Standards
EN 62368-1, EN 55032, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2,
EN 50581

Generated 2021-11-17
Page 9/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Dimensions
DIMENSIONS
Figure 1: LANactive GigaSwitch dimensions

Generated 2021-11-17
Page 10/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Interface Description
INTERFACE DESCRIPTION
88303960
Number
Description
1
Port 1 - 4: RJ45 User Ports (PoE-PSE)
2
Memory card slot (microSD)
3
Grounding terminal
4
Port 7: SFP Uplink
5
3-pin power connection
6
Port 6: RJ45 Uplink (PoE-PSE)
7
Port 5: SFP Uplink
8
Status LEDs
9
Labelling
88303965
Number
Description
1
Port 1 - 4: RJ45 User Ports (PoE-PSE)
2
Memory card slot (microSD)
3
Grounding terminal
4
Port 7: SFP Uplink
5
3-pin power connection
6
Port 6: RJ45 Uplink
7
Port 5: SFP Uplink
8
Status LEDs
9
Labelling

Generated 2021-11-17
Page 11/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Interface Description
88303963
Number
Description
1
Port 1 - 4: RJ45 User Ports
2
Memory card slot (microSD)
3
Grounding terminal
4
Function input
5
3-pin AC power connection
6
Port 6: RJ45 Uplink
7
Port 5: SFP Uplink
8
Status LEDs
9
Labelling

Generated 2021-11-17
Page 12/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Product Labels
PRODUCT LABELS
Nexans LANactive GigaSwitch devices are equipped with product labels for the purposes of quality assurance and
documentation. The product labels contain unique device-specific information that can be used for project
documentation. This information includes MAC address and serial number. The two numbers are unique and refer to
each individual device.
The information about the respective MAC address is located twice on the switch. Once on the bottom side of the
device and a second time below the labelling of the user ports. The sticker below the labelling can also be read when
the GigaSwitch is installed.
Use the barcodes of the product label with the MAC address and serial number information to simply read in the device
lists using commercially available scanners and document them in tabular form. Associate the MAC address with the
information about the installation location and the switch description.
Figure 2: Product label
Figure 3: MAC-address label

Generated 2021-11-17
Page 13/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Safety Instructions
SAFETY INSTRUCTIONS
Safety and warning instructions
Only qualified personnel may install and commission the device. Country-specific regulations must be observed.
•It is only allowed to use the provided 3-pin power connector.
•The dimensions of the supply lines must be sufficient for the connection scenario.
•After installation, cover the terminal area to prevent inadmissible touching of active parts.
MAINTENANCE AND REPAIR
The switches are maintenance-free devices. Repairs are only permitted by the manufacturer or by persons authorized
by the manufacturer. In case of doubt, please contact the manufacturer.
CLEANING
The GigaSwitch can be cleaned using a cloth which has been dampened with a mild cleaning agent. Please take care
that no cleaning agent enters the interior of the unit.
WASTE MANAGEMENT
After use, the Nexans LANactive GigaSwitch and all electronic parts contained in the scope of delivery
must be disposed of properly according to legal law at a responsible collection point.
ATTENTION: Electrical damage
For device protection, connect a thermomagnetic fuse.
CAUTION: Danger due to electric shock!
Never work with applied voltage.
Packaging
Do not throw away the packaging. The packaging has been designed for repeated use if not damaged during transport.
Only the original packaging can reliably protect the unit from damage during later transport.
Checking for transport damage
Please check the unit for transport damage after unpacking. Transport damage can be assumed in particular if the
packaging is visibly damaged. Do not try to operate an obviously damaged unit. This may result in further consequential
damages.
Recovery after storage and transport
Humidity can condensate on the unit if the unit has been stored or transported at low temperatures and subsequently
taken into a warm room. To avoid any damage please wait till any condensation has vanished from the unit's surface
before starting the uni. The unit is operational only after it has reached the guaranteed operating temperature range
(see Technical Data). The same applies also to prior storage at high temperatures.

Generated 2021-11-17
Page 14/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
DIN-Rail Installation
DIN-RAIL INSTALLATION
Figure 4: DIN-Rail Mounting Kit for GigaSwitch
The DIN-Rail Mounting Kit allows an easy and fast installation of Nexans GigaSwitch on the 35mm DIN-Rail in electrical
cabinets. The switch can be mounted in horizontal and vertical position. See page 15 how to turn the ports.
Figure 5: DIN-Rail Mounting Options

Generated 2021-11-17
Page 15/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Horizontal and Vertical Installation
HORIZONTAL AND VERTICAL INSTALLATION
Horizontal and vertical installation with a 45 mm Snap-in design
The GigaSwitch is designed primarily for installation in parapet and cable ducts with horizontal guidance. The low
overall height and the vertical guidance of the connection lines extend the range of use also to underfloor systems, e.g.
floor boxes. The switches feature a rotating switch head with Power over Ethernet function.
The head of the switch with RJ45 connectors can be mounted vertically or horizontally. There is therefore no need to
stock separate system types.

Generated 2021-11-17
Page 16/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Horizontal and Vertical Installation
12
3 4
5 6
7 8

Generated 2021-11-17
Page 17/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Power Connection
POWER CONNECTION
Pin assignment of the 3-pin DC connector
Figure 6: DC Pin assignment
Figure 7: DC Power connection
In any case please check the correct pin assignment and the correct polarity of the
wiring at the supply unit.
Input DC
Voltage
typ. [V]
Diameter [mm²]
Diameter[mm²]
AWG
Length [mm]
FG / - / +
54V DC
0.75 - 2.5
0.75 - 2.5
19 - 12
8
Figure 8: DC Power connection

Generated 2021-11-17
Page 18/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Power Connection
Pin assignment of the 3-pin AC connector
Figure 9: AC Pin assignment
Figure 10: AC Power connection
In any case please check the correct pin assignment and the correct polarity of the
wiring at the supply unit.
Input DC
Voltage
typ. [V]
Diameter [mm²]
Diameter[mm²]
AWG
Length [mm]
Torque
[Nm]
PE / L / N
230V AC
0.14 - 1.5
0.14 - 1.5
28 - 16
7
0.22 - 0.25
Figure 11: AC Power connection

Generated 2021-11-17
Page 19/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Grounding
GROUNDING
LANactive GigaSwitch with 54V DC connection
To prevent unwanted interference and failures, the correct grounding of the LANactive GigaSwitch is very important.
This becomes much more important if Power over Ethernet (PoE) is used and multiple powered devices (PD) are
connected to the GigaSwitch.
Nexans confirms that all LANactive switches are developed and manufactured according to the requirements of the
PoE standards as defined by the Institute of Electrical and Electronics Engineers (IEEE) IEEE802.3af, IEEE802.3at and
IEEE802.3bt.
In case of using a centralized power supply that powers multiple switches and thus multiple PoE devices, the grounding
must be connected next to the central power supply. In this case the plus voltage must be grounded by connecting it to
the potential equalization of the building. This is required because the positive voltage is permanently enabled by the
GigaSwitch. The following figure shows the schematic of grounding the plus voltage.
Figure 12: Block diagram of grounding
The switch can be grounded locally with the grounding terminal of the housing or connected to the central grounding by
using a three-wired cable (+, -, Ground).
Never use the minus voltage for grounding! If minus is connected to ground and furthermore
an end device has a wrong isolation, the risk of a short circuit is given. Especially some type
of PCs and IP Cameras have an electrical connection between all four copper pairs of the
RJ45 port and the ground instead of an isolation. As a result, the positive PoE voltage is
connected to ground because the positive voltage is permanently enabled by the switch (see
figure above). If the negative voltage is connected to ground at the central power supply and
the positive voltage is connected to ground inside the end-device, the result is a short circuit
between the negative and positive voltage of the central power supply via the common
grounding of the building.

Generated 2021-11-17
Page 20/33
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Hardware Installation
HARDWARE INSTALLATION
1. Check the installation location, cables should be
loose and movable. Pre-install the DIN-Rail Mounting
Kit.
2. Note the assignment of the connector. The
connection plug is included in the scope of delivery.
3. Remove the dust caps from the SFP slot. Plug the
SFP module into the SFP slot and lock it.
4. Remove the dust caps from the SFP modules.
5. Connect the SFP module to the corresponding LC
duplex fibre optic patch cable.
6. Use only the supplied microSD card. Insert the
memory card into memory card slot of the switch.