Nexans iGigaSwitch 1002 E+ SFP-2VI Guide

Generated 2021-11-04
Page 2/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Foreword
FOREWORD
LANactive Industry solution, which offers products designed for mission critical applications, is based on over 30 years
of Nexans experience in developing and producing managed industrial and FTTO switches for harsh environment
applications. Industrial switches and accessories form the core of our solution offering. LANmark Industry copper and
fibre cabling has been developed to meet the high standards, transmission demands and environmental requirements
of mission critical applications.
We also provide easy and intuitive solutions, based on a LANactive Manager software platform, for centralized
configuration and management of large networks. Thousands of switches may be operated by a single employee.
Our integrated offering is rounded off with a wide range of support and training services, with access to a global expert
and service network through a single point of contact.
Purpose of the manual
This manual describes the features, functions, operation and commissioning of the following devices of the GigaSwitch
series:
•iGigaSwitch 1002 E+ SFP-2VI
•iGigaSwitch 1004 E+ SFP-4VI
•iGigaSwitch 1008 E+ SFP-8VI
Target group
Planners and installers of Industry solutions, electrical engineers, persons entrusted with setting, testing and
maintaining Industry switches
Scope of the manual
This manual is valid for the Nexans iGigaSwitch series 10xx in combination with the current V5 version of the Nexans
LANactive Manager to manage switches with Management Hardware HW5.
The User Manual may include more than one product. Part of the content, e.g. some use cases or specifications, may
only apply to some of them. For more information on the exact feature set and specifications, see the product’s web
page and datasheet.
Support
If you are not yet a registered user of the Nexans Support Portal, please register at the Nexans support portal
http://www.nexans-ans.de/support/ and download the latest version of the firmware and the management tool. Here you
will also find the related V5 release notes and the current versions of V5 management manual.
If you have any questions or problems, please contact us at the following support e-mail address:
[email protected]
To benefit from individualized and extended product support, we recommend concluding a Nexans support contract. If
you are interested, please send us your request by e-mail to [email protected]

Generated 2021-11-04
Page 3/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
EC Declaration of Conformity
EC DECLARATION OF CONFORMITY
The manufacturer
Nexans Advanced Networking Solutions GmbH
Bonnenbroicher Strasse 2-14
41238 Moenchengladbach
Germany
declares under its sole responsibility that the products:
•88306422 iGigaSwitch 1002 E+ SFP-2VI
•88306424 iGigaSwitch 1004 E+ SFP-4VI
•88306428 iGigaSwitch 1008 E+ SFP-8VI
•88301602 iOption PoE+ 2/4P-30W
•88301604 iOption PoE+ 6/8P-30W
•88301664 iOption PoE++ 2/4P-90W
•88301666 iOption PoE++ 6/8P-90W
•88300692 SD Memory Card with MAC-Address
Following the provisions of directives:
•2014/30/EU Electromagnetic Compatibility Directive
•2011/65/EU RoHS
to which this declaration relates are in conformity with the following directives and standards:
•EN 62368-1:2014: Audio/video, information and communication technology equipment - Part 1: Safety
requirements
•EN 55032:2012: Electromagnetic compatibility of multimedia equipment - Emission requirements
•EN 61000-6-2:2005: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard
for industrial environments
•EN 50581:2012: Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
The quality and environmental management system of Nexans Advanced Networking Solutions GmbH according to
DIN EN ISO 9001:2000 and DIN EN ISO 14001:2005 ensures compliance with the European Directives and the
fulfilment of the relevant standards of the European standards bodies CEN, CENELEC and ETSI.

Generated 2021-11-04
Page 4/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Industrial Ethernet Switches
INDUSTRIAL ETHERNET SWITCHES
Any application in which an infrastructure failure could result in serious damage or life-threatening situations may be
considered mission critical. Mission critical applications are not limited to transport, traffic monitoring, oil & gas, Smart
Grids, electrical substations, or wind turbines, but might also include IP video surveillance and security in cities or on
campuses.
Network infrastructure in these applications must operate under the harshest conditions. Performance can be affected
by, for example, extreme temperatures, chemicals, ingress, interference, vibration or moisture. However, the
infrastructure should have no failures or downtime, as this could result in severe damage or even loss of life. That’s why
infrastructure and components for mission critical applications need to meet far higher requirements than a standard
network for offices.
Design must be compact and robust, equipment should offer high redundancy in areas such as data transmission and
power and guarantee high levels of availability and security. Compliance with specific industry standards is vital, as are
advanced solutions for ongoing monitoring. Many ‘non-traditional’ devices are currently being connected to networks
and these need to be monitored and managed by SCADAs. As large areas are covered, the network must be managed
and maintained in a smarter way than ever before, using a centralized approach.
Nexans LANactive Industry solution is based on Industrial Ethernet switches, industrial cabling, software and services
and designed for creating reliable and highly available LAN infrastructures in harsh environments of mission critical
applications.
Nexans industrial Ethernet switches are targeted to provide highest network availability, security and to make network
maintenance much easier. They have a high level of interoperability with other switches manufacturers and different
SCADAs. The switches provide high flexibility in network design –depending on the model, they can have up to 16
ports: fibre-optic or copper in different combinations, including the variant with 12x SFP and 4x RJ45 ports.
iGigaSwitch family can power many devices with PoE or PoE+ technology: has up to 12x PoE+ ports with 360W budget
according to IEEE 802.3at.
Fast, simple and low-cost integration of additional non-Ethernet devices directly in the field is possible with optional I/O
interfaces of industrial Ethernet switches.

Generated 2021-11-04
Page 5/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Table of Contents
TABLE OF CONTENTS
Foreword...........................................................................................................................................................................1
EC Declaration of Conformity............................................................................................................................................3
Industrial Ethernet Switches..............................................................................................................................................4
Table of Contents..............................................................................................................................................................5
Application/Description......................................................................................................................................................6
Technical Data..................................................................................................................................................................8
Dimensions.....................................................................................................................................................................10
DIN-Rail Installation ........................................................................................................................................................11
Switch Connector Overview............................................................................................................................................12
Product Labels................................................................................................................................................................13
Safety Instructions and Disclaimer..................................................................................................................................14
Preparation for Operation................................................................................................................................................15
Pin Assignment...............................................................................................................................................................16
Grounding.......................................................................................................................................................................17
Power over Ethernet (optional) .......................................................................................................................................18
Power Supplies...............................................................................................................................................................20
Product Overview - Power Supplies................................................................................................................................23
Transmission Parameters...............................................................................................................................................24
Memory Cards and Console Cables ...............................................................................................................................25
I/O Module ......................................................................................................................................................................26
LED Indicators ................................................................................................................................................................28
Start-up –Booting...........................................................................................................................................................29
Configuration Mode.........................................................................................................................................................30
Port Status LEDs.............................................................................................................................................................31
LANactive Manager Description......................................................................................................................................32
Firmware Features..........................................................................................................................................................34
Product List.....................................................................................................................................................................35
Support Portal.................................................................................................................................................................40
LANactive Starter Kits.....................................................................................................................................................41
Frequently Asked Questions (FAQ) ................................................................................................................................44
Abbreviations ..................................................................................................................................................................46

Generated 2021-11-04
Page 6/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Application/Description
APPLICATION/DESCRIPTION
LANactive 10 port managed Industrial Ethernet Switches
•10x Gigabit ports switches family with different number of SFP ports: 8, 4 or 2
•Up to 8x PoE/PoE+ ports with 240W power budget according to IEEE 802.3at
•Wide functionality targeted to make a network maintenance easier
•IEC 61850 compliancy is tested and certified by KEMA/DNV-GL
•Wide operating temperature range: -40 ... +85°C
Description
Nexans managed Industrial Ethernet switches of iGigaSwitch 10xx E+ family are the core of LANactive Industry
solution and are designed for building robust and reliable network in harsh environment of many mission critical
applications.
LANactive Industry solution includes:
•managed Industrial Ethernet switches and its accessories
•wide copper and fibre cabling offer including their industrial variant
•configuration and management software for the switches
•support services
Nexans iGigaSwitch 10xx E+ family is designed to provide maximum network availability, security, longest lifetime in
harsh environments and making a network maintenance easier.
iGigaSwitch 10xx E+ family provides great flexibility in network design - it has up to 10x Gigabit ports in different
combination. The iGigaSwitch allows to adapt the interfaces to the application by using the corresponding pluggable
modules (Fast Ethernet or Gigabit SFP). There are different models available: with 8x, 4x and 2x SFP ports.
I/O interfaces
The preinstalled I/O module of the iGigaSwitch 10xx E+ family has two potential-free function inputs and two
programmable alarm contacts for fast, simple and low-cost integration of additional non-Ethernet devices.
Power over Ethernet (PoE/PoE+)
Up to 8x connected devices can be supplied with Power over Ethernet. In accordance with the latest IEEE 802.3at
(PoE+) standard, up to 30 Watts of power are available for each connected device, with total budget of 240Watts.
There are two PoE/PoE+ options available for iGigaSwitch 10xx E+ family depending on the switch model - for 4x or 8x
(88301602 or 88301604 respectively).
IEC 61850
Nexans iGigaSwitch family comply to IEC 61850 requirements (parts 6, 7-1, 7-2, 7-3, 7-4, 8-1, 9-1 and 9-2
Communication networks and systems for power utility automation). This functionality is critical for Smart grid and
allows to use standardized equipment to ensure correct and reliable communication of all networked devices of Smart
grid infrastructure (including switches, PLCs, different controllers, sensors etc.) with each other and with central
SCADA.
The compliance is tested and confirmed by KEMA/DNV-GL.
Easy maintenance
There is an extensive range of Industrial Ethernet switch functionalities to make the network maintenance much easier.
In many cases, network infrastructures are scattered over wide areas - Smart grid, industrial of infrastructures sites, oil
& gas application, IP video surveillance and security systems in campuses or cities, etc.
•Nexans switches have an extensive diagnostic functionality to provide a wide range of information about their
condition, temperature, power level, ports usage, PoE and many others. Alerts can be defined for many
parameters to automate IT maintenance processes.

Generated 2021-11-04
Page 7/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Application/Description
•The cable diagnostic function of Nexans industrial switches (will be available with next firmware) ensures an
easy and fast localisation of possible faults on the connected Twisted Pair copper cables. An identification of
short circuits, interruptions, impedance mismatches or reversals can be localised up to the meter via the
management feature.
•By using SFP modules with Digital Diagnostic Monitoring Function in our Nexans iSwitch systems you can
monitor the optical parameters (optical input power, optical output power, laser bias current) and to recognize
upcoming problems with the fibre optic link at an early stage!
•SD cards with unique MAC address –this option makes network maintenance easier by simplifying several
processes like switches setup and replacement. This option will help to utilize the IT staff recourses smarter
and more efficient.
•LANactive Manager (Nexans switch configuration and management platform) is an easy-to-use intuitive and
efficient solution to supervise, manage and configure for Nexans switches
•Other functionalities
Interoperability
Nexans Industrial Ethernet switches offers tested and approved interoperability, including its proprietary protocols, with
a wide range of manufacturers, including Cisco, HP, Alcatel Lucent (Nokia), Extreme Networks, etc.
In addition, Nexans Industrial Ethernet switches:
•support CDP (Cisco Discovery Protocol) and LLDP protocols
•are compatible with Cisco Secure Access Control Server ACS
Nexans iGigaSwitch family can operate in various SCADAs.
Management
•WEB/SNMP/SSH/V.24 management
•Enhanced security features by providing controlled access to the management data through different
authentication levels, port security and encrypted communication (SCP, SSHv2, HTTPS, RADIUS, SNMPv3,
IEEE 802.1X etc.)
•Integration to any SNMP based management platform
•Easy configuration of large number of switches via LANactive Manager (administration tool)
•IPv6 according to IPv6 Forum phase 2 core specifications

Generated 2021-11-04
Page 8/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Technical Data
TECHNICAL DATA
Ordering information
iGigaSwitch 1002 E+
SFP-2VI HW5
iGigaSwitch 1004 E+
SFP-4VI HW5
iGigaSwitch 1008 E+
SFP-8VI HW5
Article number
88306422
88306424
88306428
LAN interfaces
User interfaces (Twisted Pair)
8x 1000Base-T
6x 1000Base-T
2x 1000Base-T
Uplink interfaces (SFP)
2x 100/1000 Mbps
4x 100/1000 Mbps
8x 100/1000 Mbps
HSR/PRP interfaces (SFP)
-
Diagnostic functions (interfaces)
Digital Diagnostics Monitoring Interface
Yes
Twisted Pair cable diagnostic
Yes
General
Dimensions [WxHxD]
83mm x 133mm x 125mm
IP protection class
IP30 (EN 60529)
Mounting
35mm DIN-Rail Mounting according to EN 60715, (EN 50022) Different
mounting positions of DIN-rail clip - vertical and horizontal switch mounting.
Optional: wall mounting.
Material
anodised/varnished aluminium
Colour
black
Ambient temperature
Operation: -40 ... 85°C, Storage: -40 ... 85°C
Relative humidity
20 - 90% (non-condensing)
Weight
1300g
MTBF
> 500.000h
Power Supply
Input voltage for switch
18 …60V DC
Input voltage for PoE+
46…57 V DC (typ. 54V DC)
Power consumption (without PoE)
13W (standby)…15W (typ.) ... 22W (fully connected)
Heat output
51.15 BTU(IT)/h (typ.)
Connector
5-pin terminal blocks, screw-on type (up to 2.5 mm²) / (+) (-) (+) (-) (FPE)
Connector PoE
3-pin terminal blocks, screw-on type (up to 2.5 mm²) / (+) (-) (FPE)
Power over Ethernet
Number of PoE+ ports
Max. 8
Max. 6
Max. 2
Max. PoE power budget
Max. 240W
Max. 180W
Max. 60W
Number of PoE++ ports
-
Max. 6
-
Max. PoE++ power budget
-
Max. 540W
-
Functional parameters
Switching capacity (backplane)
50Gbps
Data throughput
> 1,488,000 Packets/sec. per port (FDX, bidirectional)
Switching mode
Store and forward, self-learning
Max. frame size
9,600 bytes (Support of Jumbo frames)
Latency
15μs / 2.5μs (1 Gbps 1518Byte FIFO / LIFO)
2.7μs / 2.2μs (1 Gbps 64Byte FIFO / LIFO)

Generated 2021-11-04
Page 9/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Technical Data
Management
On-Board High-Performance management
Hardware
V5, 128 MByte RAM, 16 MByte NOR FLASH, 256 MByte NAND FLASH
Firmware update
Update in separated FLASH domain, corruption impossible
FLASH configuration
Dual configuration, corruption impossible
Configuration button
Yes (optional)
Reset button
Yes (optional)
Memory card
Memory Card with fixed MAC-Address for redundant storage of the complete
switch configuration (option)
Console port (V.24)
Yes

Generated 2021-11-04
Page 10/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Dimensions
DIMENSIONS
83 mm
139 mm
139 mm
125 mm

Generated 2021-11-04
Page 11/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
DIN-Rail Installation
DIN-RAIL INSTALLATION
The DIN rail adapter of 10 ports Industrial Ethernet switch is designed for the installation of a switch on DIN-35mm
standard rail. The kit comes with a rail clamp that allows for vertical and horizontal mounting arrangements.

Generated 2021-11-04
Page 12/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Switch Connector Overview
SWITCH CONNECTOR OVERVIEW
iGigaSwitch 10XX HW5 Series
Power input for PoE+
(3-pin connector)
Up to 8 RJ45 ports
10/100/1000 Mbps
Up to 8 SFP ports
100/1000 Mbps
Redundant power input
(5-pin connector)
Console port
Dip Switches
Memory card slot
Configurable LEDs
I/O ports, 12-pin terminal block
bottom
DIN rail mounting clip
back

Generated 2021-11-04
Page 13/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Product Labels
PRODUCT LABELS
The active Nexans devices are equipped with product labels for the purposes of quality assurance and documentation.
The product labels contain unique device-specific information that can be used for your project documentation. This
information includes MAC address and serial number. The two identity features are unique and can be assigned to
each individual device.
The information about the respective MAC address is located twice on the switch. Once on the front of the switch
between the power inputs and a second time on the right side of the switch. The sticker on the right side can also be
read out when installed.
Use the barcodes of the product label with the MAC address and serial number information to simply read in the device
lists using commercially available scanners and document them in tabular form. Associate the MAC address with the
information about the installation location and the switch description.

Generated 2021-11-04
Page 14/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Safety Instructions and Disclaimer
SAFETY INSTRUCTIONS AND DISCLAIMER
Safety and warning instructions
Only qualified personnel may install and commission the device. Country-specific regulations must be observed.
•Properly perform mains connection and ensure protection against electric shock
•The power supply must be switched from the outside in accordance with the provisions of EN 60950 / EN
62368 (e.g. by the primary-side line protection).
•Sufficiently dimension and secure supply lines
•Dimension secondary-side lines accordingly to the max. output current and secure it
•separately
•After installation, cover the terminal area to prevent inadmissible touching of live parts (e.g. when installing in
metal mounting devices)
Further information can be found at www.nexans.de/LANsystems
Disclaimer
The content of this manual has been checked for compliance with the hardware and software described. Nevertheless,
deviations cannot be ruled out, so no liability is assumed for the complete agreement. The information in this manual is
reviewed regularly and any necessary corrections are included in subsequent editions. Suggestions for improvement
are welcomed. Technical changes are reserved, even without notice.
Further information can be found at www.nexans.de/LANsystems
Nexans Advanced Networking Solutions
Bonnenbroicher Str. 2-14
41238 Moenchengladbach
Germany
Tel: [phone]
E-Mail: [email protected]
ATTENTION: Electrical damage
For device protection, connect a thermomagnetic fuse.
CAUTION: Danger due to electric shock!
Never work with applied voltage.

Generated 2021-11-04
Page 15/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Preparation for Operation
PREPARATION FOR OPERATION
Opening of the unit
Please disconnect the unit from the mains supply and from all other power sources prior to opening the unit. Any
subsequent servicing and repair on the open and live unit may only be performed by a qualified person.
Spare parts
Only original spare parts may be used. Any other spare parts are only allowed if they do not impair the safety of the
power supply unit.
Packaging
Do not throw away the packaging. The packaging has been designed for repeated use if not damaged during transport.
Only the original packaging can reliably protect the unit from damage during later transport.
Checking the scope of delivery
•Switch Module
•Plug-in screw terminals for connecting the 48 VDC power supply (5-pin)
•Plug-in screw terminals for connecting the PoE power supply (3-pin)
•Documentation
•Management Documentation
Checking for transport damage
Please check the unit for transport damage after unpacking. Transport damage can be assumed in particular if the
packaging is visibly damaged. Do not try to operate an obviously damaged unit. This may result in further consequential
damages.
Recovery after storage and transport
Moisture can condensate on the unit if the unit has been stored or transported at low temperatures and subsequently
taken into a warm room. To avoid any damage please wait till any moisture condensation has vanished from the unit's
surface before switching the unit on. The unit is operational only after it has reached the guaranteed operating
temperature range (see Technical Data). The same applies also to prior storage at high temperatures.
Cleaning the unit
If the unit has become dirty during use it can be cleaned using a cloth which has been dampened with a mild cleaning
agent. Please take care that no cleaning agent enters the interior of the unit.
Power supply
The power supply of the systems is provided via an external power supply (SELV). The system is connected to 48V DC
(direct current) via the Power terminal on the rear side using a 5-pin plug-in screw terminal. Protective earth (PE) is
connected to one of the provided 6.3 mm FASTON terminals for minimizing leakage currents.
CAUTION!
Only a trained electrician may connect and insert the plug-in screw terminal included in the
delivery. Both solid and flexible connecting leads up to a maximum of 2.5 mm2 can be used. The
wire ends must be stripped over a length of 5-6 mm. The wire must not be stripped longer than 6
mm to prevent the risk of a short circuit between the conductors! A screwdriver with a 3.5 mm wide
blade should be used to tighten the screws properly in the plug.

Generated 2021-11-04
Page 16/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Pin Assignment
PIN ASSIGNMENT
Wiring to the 3/5-pin connector and pin assignment of the switch
Connection elements of the 3/5-pin connector
Input DC
Diameter
[mm²]
Diameter[mm²]
AWG
Length [mm]
Torque
[Nm]
(+/-)+/-/FG
0.75-2.5
0.75-2.5
19-12
8
0.6-0.8
The connectors of the iGigaSwitch have screw caps. If necessary, the plug can be connected to the switch with 2
screws.
In any case please check the correct pin assignment and the correct polarity of the wiring at the
supply unit.
+
-
+
-
FG

Generated 2021-11-04
Page 17/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Grounding
GROUNDING
Guidelines for earthing systems in connection with central power supply concepts and
usage of FTTO switches for PoE applications

Generated 2021-11-04
Page 18/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Power over Ethernet (optional)
POWER OVER ETHERNET (OPTIONAL)
Power over Ethernet is an attractive and standardized alternative for the power supply of LAN equipment such as VoIP
phones, Wireless LAN Access Points, IP video cameras etc., while using the "normal" Ethernet standard cable, i.e.
without any additional cable tangle.
Function
An power source equipment (PSE) ensures the power supply of a powered device (PD). Nexans iGigaSwitch 10xx
series supports all three different PoE standards.
•PoE IEEE802.3af
•PoE+ IEEE802.3aft
•PoE++ IEEE802.3bt
For Poe and PoE+, the standard defines 3 modes of operation for power supply, which is ensured via different wire
pairings of the TP data connection:
•Endpoint PSE mode A - power supply via TP pairs 1/2 and 3/6
•Endpoint PSE mode B - power supply via TP pairs 4/5 and 7/8
•Midspan PSE mode B - power supply through an external device via TP pairs 4/5 and 7/8
PoE++ is using all four pairs (1/2, 3/6, 4/5, 7/8) for power transmission. However, PoE++ is backward compatible, that
means PoE or PoE+ PDs can be connected and powered.
The PoE solution will only supply power if an appropriate powered device (PD) is detected. The following functions are
checked prior to enabling PoE power supply:
•The active PSE source identifies the powered device (PD).
•The operational mode is detected.
•The required power class is detected based on the classification current.
Thus, any damages can be avoided, if the connected terminal unit is not standard-compliant.
Mode A—Pairs 1/2 and 3/6
Power Source Equipment (PSE)
Powered Device (PD)
MDI(X)
MDI
1 BI_DB+
PoE-
PoE+
1 BI_DA+
2 BI_DB-
PoE-
PoE+
2 BI_DA-
3 BI_DA+
PoE+
PoE-
3 BI_DB+
4 BI_DD+
4 BI_DC+
5 BI_DD-
5 BI_DC-
6 BI_DA-
PoE+
PoE-
6 BI_DB-
7 BI_DC+
7 BI_DD+
8 BI_DC-
8 BI_DD-
In any case please check the correct pin assignment and the correct polarity of the PoE wiring at the
terminal unit.

Generated 2021-11-04
Page 19/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Power over Ethernet (optional)
Power Source Equipment (PSE+)
Thanks to the optional Power over Ethernet (PoE +) functionality, PoE-capable end devices can be supplied with power
in accordance with IEEE 802.3at directly from the switch. The Power over Ethernet functions can be parameterized,
controlled and monitored via management.
PoE class
Max. output power at
PSE
Available power at
PD
Classification
signature
PoE standard
0
15.4 W
0.44 - 12.96 W
0 - 4 mA
IEEE 802.3af/at
1
4 W
0,44 - 3.84 W
9 - 12 mA
IEEE 802.3af/at
2
7 W
3.84 - 6.49 W
17 - 20 mA
IEEE 802.3af/at
3
15.4 W
6.49 - 12.95 W
26 - 30 mA
IEEE 802.3af/at
4
30 W
12.95 - 25.50 W
35 - 45 mA
IEEE 802.3at
5
45W
25.5 - 40W
36 - 44mA/1 - 4mA
IEEE 802.3bt
6
60W
40 - 51W
36 - 44mA/9 - 12mA
IEEE 802.3bt
7
75W
51 - 62W
36 - 44mA/17 - 20mA
IEEE 802.3bt
8
90W
62 - 71.3W
36 - 44mA/26 - 30mA
IEEE 802.3bt
Permitted voltage levels
The voltage ranges for the supply of switches are defined as follows:
PoE standard
Max. output power per port
Specified voltage range at
the Power Source
Equipment (PSE)
Voltage level at the switch,
min. / typ. / max.
IEEE 802.3af (Type 1)
15.4W
44 - 57V DC
46 / 48 / 57V DC
IEEE 802.3at (Type 2)
30W
50 - 57V DC
50 / 54 / 57V DC
IEEE 802.3bt (Type 3)
60W
50 –57V DC
50 / 54 / 57V DC
IEEE 802.3bt (Type 4)
90W
52 –57V DC
50 / 54 / 57V DC
Nexans iOption combability
Compatible with
iOption article
number
Number of PoE
ports
iGigaSwitch 1002 E+
SFP-2VI
iGigaSwitch 1004 E+
SFP-4VI
iGigaSwitch 1008 E+
SFP-8VI
88301602
4x 30W
x
x
x
88301604
8x 30W
x
88301664
4x 90W
x
88301666
8x 90W
x
Please check compatibility, proper pin assignment and polarity prior to and during putting the
system into operation to avoid any damage resulting from attaching incompatible equipment.
The maximum load of the individual ports and the overall load are limited. These limits have to be
observed in any case. Otherwise the connected units might be damaged or cannot be operated
(see Technical Data).

Generated 2021-11-04
Page 20/48
Contact
Nexans LAN Systems
Tel.: [phone]
[email protected]
Power Supplies
POWER SUPPLIES
Nexans article number: 88645963
Description: iPowerSupply S 110-230VAC/24VDC 100W
Dimensions (mm): 90x90x61
Ambient temperature range (operating): -25°C to + 70°C (Derating from + 55°C)
Input voltage: 110-240V AC / 50Hz / 60Hz / 1.3A (95-250V DC)
Output voltage: 23 - 30V DC, 24V DC / 4.2 A (acc. to IEEE 802.3af and IEEE 802.3at)
Output power: max. 100 Watt
Installation: DIN rail mounting
Nexans article number: 88645960
Description: iPowerSupply S 110-230VAC/48VDC 100W
Dimensions (mm): 90x90x61
Ambient temperature range (operating): -25°C to + 70°C (Derating from + 55°C)
Input voltage: 110-240V AC / 50Hz / 60Hz / 1.3A (95-250V DC)
Output voltage: 30 - 56V DC, 54V DC / 2 A (acc. to IEEE 802.3af and IEEE 802.3at)
Output power: max. 100 Watt
Installation: DIN rail mounting