Nexcom NISE 300 User manual

NEXCOM International Co., Ltd.
NEXCOM International Co., Ltd.
Published May 2017 www.nexcom.com
IoT Automation Solutions Business Group
Fan-less Computer
NISE 300
User Manual

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. ii NISE 300 User Manual
Content
Contents
Preface
Copyright ............................................................................................. iv
Disclaimer.............................................................................................. iv
Acknowledgements ............................................................................... iv
Regulatory Compliance Statements........................................................ iv
Declaration of Conformity...................................................................... iv
RoHS Compliance ................................................................................... v
Warranty and RMA ................................................................................ vi
Safety Information ................................................................................viii
Installation Recommendations...............................................................viii
Safety Precautions.................................................................................. ix
Technical Support and Assistance............................................................ x
Conventions Used in this Manual............................................................ x
Global Service Contact Information........................................................ xi
Package Contents.................................................................................xiii
Ordering Information ............................................................................xiv
Chapter 1: Product Introduction
Overview ................................................................................................1
Key Features ...........................................................................................1
Hardware Specifications..........................................................................2
Knowing Your NISE 300..........................................................................4
Front View...........................................................................................4
Rear View............................................................................................4
Mechanical Dimensions...........................................................................6
Chapter 2: Jumpers and Connectors
Before You Begin ....................................................................................7
Precautions ............................................................................................7
Jumper Settings ......................................................................................8
Locations of the Jumpers and Connectors for NISB 300...........................9
Jumpers................................................................................................11
CMOS Pin Header..............................................................................11
ME Pin Header Clear..........................................................................11
AT/ATX Mode Select ..........................................................................12
Connector Pin Definitions .....................................................................13
External I/O Interfaces - Front Panel ...................................................13
9V to 30VDC Input ........................................................................13
USB 2.0..........................................................................................13
USB 3.0..........................................................................................14
HDMI.............................................................................................14
DVI-I ..............................................................................................15
CFast .............................................................................................15
LAN1 and LAN2 Ports.....................................................................16
LED Indicators ................................................................................17
Power Switch.................................................................................17
Internal Connectors...........................................................................18
External SMBus ..............................................................................18
SIM Card Line-out Pin Header ........................................................18
SIM Card Mic-in Pin Header ...........................................................19
SIM Card Socket ............................................................................19

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. iii NISE 300 User Manual
Content
DC-In Power Connector .................................................................20
Reset JST Connector.......................................................................20
LVDS Channel A Connector............................................................21
LVDS Channel B Connector ............................................................21
SATA3 Connector 2........................................................................22
SATA3 Connector 1........................................................................22
SATA3 Power Connector 1 .............................................................23
SATA3 Power Connector 2 .............................................................23
USB 2.0 JST Connector...................................................................24
COM6 Connector ..........................................................................24
COM2 RS232 5V/12V RI# Pin Power Select ....................................25
COM1 and COM2 Connectors.......................................................25
COM5 Connector ..........................................................................26
COM4 Connector ..........................................................................26
COM3 Connector ..........................................................................27
Battery Connector..........................................................................27
GPIO Pin Header ............................................................................28
GPIO LED Pin Header......................................................................28
Smart Fan1 Connector ..................................................................29
USB Connector .............................................................................29
Mini-PCIe Connector (3.5G/LTE) .....................................................30
Mini-PCIe Connector (mSATA)........................................................31
Mini-PCIe Connector 1...................................................................32
Mini-PCIe Connector 2...................................................................33
Mini-PCIe Connector 3...................................................................34
Mini-PCIe Connector 4...................................................................35
Board to Board Connector .............................................................36
Chapter 3: System Setup
Removing the Top Cover.......................................................................37
Removing the Bottom Cover.................................................................38
Installing a SO-DIMM............................................................................39
Installing a mSATA Module ...................................................................41
Installing a Wi-Fi Module ......................................................................43
Installing an Antenna............................................................................45
Installing a SIM Card.............................................................................48
Installing a SATA Hard Drive ..................................................................50
Installing a CFast Card ..........................................................................53
Packing.................................................................................................55
Chapter 4: BIOS Setup
About BIOS Setup.................................................................................57
When to Configure the BIOS.................................................................57
Default Configuration...........................................................................58
Entering Setup......................................................................................58
Legends................................................................................................58
BIOS Setup Utility..................................................................................60
Main .................................................................................................60
Advanced .........................................................................................60
Chipset..............................................................................................70
Boot..................................................................................................75
Security .............................................................................................77
Save & Exit ........................................................................................77
Appendix A: Power Consumption ........................79
Appendix B: Watchdog Timer Setting..................80
Appendix C: GPI/O Programming Guide ..............81

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. iv NISE 300 User Manual
Preface
Preface
Copyright
This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. No
part of this manual may be reproduced, copied, translated or transmitted in
any form or by any means without the prior written consent from NEXCOM
International Co., Ltd.
Disclaimer
The information in this document is subject to change without prior notice and
does not represent commitment from NEXCOM International Co., Ltd. However,
users may update their knowledge of any product in use by constantly checking
its manual posted on our website: http://www.nexcom.com. NEXCOM shall
not be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use of any product, nor for any infringements upon the rights
of third parties, which may result from such use. Any implied warranties of
merchantability or fitness for any particular purpose is also disclaimed.
Acknowledgements
NISE 300 is a trademark of NEXCOM International Co., Ltd. All other product
names mentioned herein are registered trademarks of their respective
owners.
Regulatory Compliance Statements
This section provides the FCC compliance statement for Class B devices and
describes how to keep the system CE compliant.
Declaration of Conformity
FCC
This equipment has been tested and verified to comply with the limits for
a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
(domestic environment) is likely to cause harmful interference, in which
case the user will be required to correct the interference (take adequate
measures) at their own expense.
CE
The product(s) described in this manual complies with all applicable
European Union (CE) directives if it has a CE marking. For computer systems
to remain CE compliant, only CE-compliant parts may be used. Maintaining
CE compliance also requires proper cable and cabling techniques.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. vNISE 300 User Manual
Preface
RoHS Compliance
NEXCOM RoHS Environmental Policy and Status
Update
NEXCOM is a global citizen for building the digital
infrastructure. We are committed to providing green
products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in
Electronic Equipment) directive 2011/65/EU, to be your trusted green
partner and to protect our environment.
RoHS restricts the use of Lead (Pb) < 0.1% or 1,000ppm, Mercury (Hg) < 0.1%
or 1,000ppm, Cadmium (Cd) < 0.01% or 100ppm, Hexavalent Chromium
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or
1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm.
In order to meet the RoHS compliant directives, NEXCOM has established
an engineering and manufacturing task force to implement the introduction
of green products. The task force will ensure that we follow the standard
NEXCOM development procedure and that all the new RoHS components
and new manufacturing processes maintain the highest industry quality
levels for which NEXCOM are renowned.
The model selection criteria will be based on market demand. Vendors and
suppliers will ensure that all designed components will be RoHS compliant.
How to recognize NEXCOM RoHS Products?
For existing products where there are non-RoHS and RoHS versions, the
suffix “(LF)” will be added to the compliant product name.
All new product models launched after January 2013 will be RoHS compliant.
They will use the usual NEXCOM naming convention.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. vi NISE 300 User Manual
Preface
Warranty and RMA
NEXCOM Warranty Period
NEXCOM manufactures products that are new or equivalent to new in
accordance with industry standard. NEXCOM warrants that products will
be free from defect in material and workmanship for 2 years, beginning on
the date of invoice by NEXCOM. HCP series products (Blade Server) which
are manufactured by NEXCOM are covered by a three year warranty period.
NEXCOM Return Merchandise Authorization (RMA)
▪Customers shall enclose the “NEXCOM RMA Service Form” with the
returned packages.
▪Customers must collect all the information about the problems
encountered and note anything abnormal or, print out any on-screen
messages, and describe the problems on the “NEXCOM RMA Service
Form” for the RMA number apply process.
▪Customers can send back the faulty products with or without accessories
(manuals, cable, etc.) and any components from the card, such as CPU
and RAM. If the components were suspected as part of the problems,
please note clearly which components are included. Otherwise, NEXCOM
is not responsible for the devices/parts.
▪Customers are responsible for the safe packaging of defective products,
making sure it is durable enough to be resistant against further damage
and deterioration during transportation. In case of damages occurred
during transportation, the repair is treated as “Out of Warranty.”
▪Any products returned by NEXCOM to other locations besides the
customers’ site will bear an extra charge and will be billed to the customer.
Repair Service Charges for Out-of-Warranty Products
NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.
Repair Service Charges for Out-of-Warranty Products
NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.
System Level
▪Component fee: NEXCOM will only charge for main components such as
SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistor, capacitor.
▪Items will be replaced with NEXCOM products if the original one cannot
be repaired. Ex: motherboard, power supply, etc.
▪Replace with 3rd party products if needed.
▪If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.
Board Level
▪Component fee: NEXCOM will only charge for main components, such
as SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistors, capacitors.
▪If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. vii NISE 300 User Manual
Preface
Warnings
Read and adhere to all warnings, cautions, and notices in this guide and
the documentation supplied with the chassis, power supply, and accessory
modules. If the instructions for the chassis and power supply are inconsistent
with these instructions or the instructions for accessory modules, contact
the supplier to find out how you can ensure that your computer meets
safety and regulatory requirements.
Cautions
Electrostatic discharge (ESD) can damage system components. Do the
described procedures only at an ESD workstation. If no such station is
available, you can provide some ESD protection by wearing an antistatic
wrist strap and attaching it to a metal part of the computer chassis.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. viii NISE 300 User Manual
Preface
Installation Recommendations
Ensure you have a stable, clean working environment. Dust and dirt can get
into components and cause a malfunction. Use containers to keep small
components separated.
Adequate lighting and proper tools can prevent you from accidentally
damaging the internal components. Most of the procedures that follow
require only a few simple tools, including the following:
▪A Philips screwdriver
▪A flat-tipped screwdriver
▪A grounding strap
▪An anti-static pad
Using your fingers can disconnect most of the connections. It is recommended
that you do not use needle-nose pliers to disconnect connections as these
can damage the soft metal or plastic parts of the connectors.
Safety Information
Before installing and using the device, note the following precautions:
▪Read all instructions carefully.
▪Do not place the unit on an unstable surface, cart, or stand.
▪Follow all warnings and cautions in this manual.
▪When replacing parts, ensure that your service technician uses parts
specified by the manufacturer.
▪Avoid using the system near water, in direct sunlight, or near a heating
device.
▪The load of the system unit does not solely rely for support from the
rackmounts located on the sides. Firm support from the bottom is highly
necessary in order to provide balance stability.
▪The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
CAUTION!
CAUTION!CAUTION!
Danger of explosion if battery is incorrectly replaced.
Replace with the same or equivalent type recommended by
the manufacturer. Discard used batteries according to the
manufacturer’s instructions.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. ix NISE 300 User Manual
Preface
Safety Precautions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a
damp cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a stable surface during installation. Dropping it or
letting it fall may cause damage.
7. The openings on the enclosure are for air convection to protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting
the equipment to the power outlet.
9. Place the power cord in a way so that people will not step on it. Do not
place anything on top of the power cord. Use a power cord that has been
approved for use with the product and that it matches the voltage and
current marked on the product’s electrical range label. The voltage and
current rating of the cord must be greater than the voltage and current
rating marked on the product.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical
shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b.Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d.The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. Do not place heavy objects on the equipment.
16. The unit uses a three-wire ground cable which is equipped with a third
pin to ground the unit and prevent electric shock. Do not defeat the
purpose of this pin. If your outlet does not support this kind of plug,
contact your electrician to replace your obsolete outlet.
17. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. xNISE 300 User Manual
Preface
Technical Support and Assistance
1. For the most updated information of NEXCOM products, visit NEXCOM’s
website at www.nexcom.com.
2. For technical issues that require contacting our technical support team or
sales representative, please have the following information ready before
calling:
– Product name and serial number
– Detailed information of the peripheral devices
– Detailed information of the installed software (operating system,
version, application software, etc.)
– A complete description of the problem
– The exact wordings of the error messages
Warning!
1. Handling the unit: carry the unit with both hands and handle it with care.
2. Maintenance: to keep the unit clean, use only approved cleaning products
or clean with a dry cloth.
3. CompactFlash: Turn off the unit’s power before inserting or removing a
CompactFlash storage card.
Conventions Used in this Manual
Warning:
Information about certain situations, which if not observed,
can cause personal injury. This will prevent injury to yourself
when performing a task.
CAUTION!
CAUTION!CAUTION! Caution:
Information to avoid damaging components or losing data.
Note:
Provides additional information to complete a task easily.
Safety Warning: This equipment is intended for installation
in a Restricted Access Location only.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. xi NISE 300 User Manual
Preface
Global Service Contact Information
Headquarters
NEXCOM International Co., Ltd.
9F, No. 920, Chung-Cheng Rd.,
ZhongHe District, New Taipei City, 23586,
Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
www.nexcom.com
America
USA
NEXCOM USA
2883 Bayview Drive,
Fremont CA 94538, USA
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.com
Asia
Taiwan
NEXCOM Intelligent Systems
Taipei Office
13F, No.920, Chung-Cheng Rd.,
ZhongHe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.com.tw
NEXCOM Intelligent Systems
Taichung Office
16F, No.250, Sec. 2, Chongde Rd.,
Beitun Dist.,
Taichung City 406, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.com.tw
Japan
NEXCOM Japan
9F, Tamachi Hara Bldg.,
4-11-5, Shiba Minato-ku,
Tokyo, 108-0014, Japan
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom-jp.com
China
NEXCOM China
1F & 2F, Block A, No. 16 Yonyou Software Park,
No. 68 Beiqing Road, Haidian District,
Beijing, 100094, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. xii NISE 300 User Manual
Preface
Europe
United Kingdom
NEXCOM EUROPE
10 Vincent Avenue,
Crownhill Business Centre,
Milton Keynes, Buckinghamshire
MK8 0AB, United Kingdom
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.eu
Italy
NEXCOM ITALIA S.r.l
Via Lanino 42,
21047 Saronno (VA), Italia
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcomitalia.it
NEXCOM Shanghai
Room 603/604, Huiyinmingzun Plaza Bldg., 1,
No.609, Yunlin East Rd.,
Shanghai, 200333, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn
NEXCOM Surveillance Technology Corp.
Room202, Building B,
the GuangMing Industrial Zone Zhonghua Rd.,
Minzhi Street, Longhua District,
Shenzhen 518131, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn
NEXCOM United System Service
Hui Yin Ming Zun Building Room 1108,
Building No. 11, 599 Yunling Road, Putuo District,
Shanghai, 200062, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. xiii NISE 300 User Manual
Preface
Package Contents
Before continuing, verify that the NISE 300 package that you received is complete. Your package should have all the items listed in the following table.
Item Part Number Name Description Qty
1 4NCPF00204X00 Terminal Blocks 2P Phoenix Contact:1777989 5.08mm Female DIP Green 1
2 4NCPM00203X00 Terminal Blocks 2P Phoenix Contact:1803578 3.81mm Male DIP Green 1
3 50311F0100X00 (H)Round Head Screw w/Spring+Flat Washer Long FEI:P3x6L P3x6 iso/SW6x0.5 NI 1
4 50311F0295X00 Flat Head Screw Long FEI:F2x4 NYLOK NIGP F2x4 NIGP NYLOK 2
5 50311F0326X00 Flat Head Screw Long FEI:F3x5 NYLOK NI+Heat Treatment F3x5 NYLOK NI+Heat Treatment 8
6 50311F0330X00 Round Head Screw Long FEI:P2x3 ISO+Nylon P2x3 NI NYLOK 12
7 5040450007X00 (H)NISE 300 IO Bracket VER.A for Antenna CHYUAN-JYH 57.6(L)x2.5(W)x25.35(H)(mm) Aluminum Alloy 1
8 5060900226X00 Mini PCIe Bracket CHYUAN-JYH 29x30x2.1mm SPCC t=1.0mm NI 1
9 6012200052X00 PE Zipper Bag #8 170x240mm, w/China RoHS Symbol 1
10 6012200053X00 PE Zipper Bag #3 100x70mm, w/China RoHS Symbol 1
11 60177B0272X00 (N)NISE 300 Quick Reference Guide VER:B SIZE:A4 KRAMER 1
12 602DCD0786X00 (N)NISE 300 DVD Driver VER:1.0 JCL 1
13 7800000078X00 DVI-I TO VGA Adapter For NISE 104 ST:ADDH27B DVI-I (24+5)Pin Male to VGA 15Pin Female 1

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. xiv NISE 300 User Manual
Preface
Ordering Information
The following information below provides ordering information for NISE 300.
• Barebone
NISE 300 System (P/N: 10J00030000X0)
• 19V, 120W AC to DC power adapter w/o power core (P/N: 7400120013X00)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 1NISE 300 User Manual
Chapter 1: Product Introduction
Chapter 1: Product Introduction
Key Features
▪Onboard BGA type 4th Generation Intel®Core™ i7/i5/i3 Processor
▪Mobile Intel®QM87 PCH
▪2x USB 3.0; 2x USB 2.0
▪6x Mini-PCIe, 2x RS232/422/485 with Auto Flow
▪Support 1x mSATA, 1x CFast and 2x 2.5” SATA
▪User-friendly I/O design; all I/O interfaces at front
▪Support wireless communication; optional for Wi-Fi or 3G modules
▪Support +9V and +30VDC input; support ATX power mode
▪Easy replacement for RTC battery
▪Dual Intel®GbE LAN Ports, support WoL, Teaming & PXE
Overview

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 2NISE 300 User Manual
Chapter 1: Product Introduction
Hardware Specifications
CPU Support
▪Onboard BGA type 4th generation Intel®Core™ i7/i5/i3 processors
– Core™ i7-4712HQ, Quad Core™, 3.3GHz
– Core™ i5-4402E, Dual Core™, 1.6GHz (Onboard Default)
– Core™ i3-4112E, Dual Core™, 1.8GHz
– Celeron 2002E, Dual Core™, 1.5GHz
▪Mobile Intel®QM87 PCH
Main Memory
▪2x DDR3/DDR3L SO-DIMM sockets, support up to 8GB DDR3/DDR3L
1333/1600 RAM, un-buffered and non-ECC
Display Option
▪Three independent displays
- VGA+DVI-D (through DVI-I Y Cable) + HDMI
▪Dual independent displays
- DVI-D + VGA
- HDMI + VGA
Front I/O Interface
▪ATX power on/off switch
▪1x Remote Power ON/OFF Switch
▪1x Power Status/1x HDD Access LEDs
▪2x USB3.0 ports (Blue Color, 900mA per each)
▪2x USB2.0 Ports (500mA per each)
▪1x DVI-I, 1x HDMI
▪2x DB9 for COM1 & COM2
- support RS232/422/485 with Auto Flow Control
- support 5V/12V/Ring function by jumper setting
▪2x Intel®82574L GbE LAN Ports, support PXE/Teaming/WoL
▪1x External CFast socket
▪1x SIM Card holder
▪1x External RTC Li-ion Battery holder
▪1x Line out and 1x Mic-in
Internal I/O Interface
▪4x GPI and 4 GPO (5V, TTL Type)
▪4x COM Ports Box Header (RS232 only)
▪1x USB 2.0 Internal Connector, for USB dongle
▪2x USB 2.0 Internal Box Header
Storage Device
▪1x CFast (SATA 3.0)
▪1x mSATA (SATA 3.0)
▪2x 2.5” HDD (SATA 3.0)
Expansion Slot
▪1x Mini-PCIe socket for GSM/Wi-Fi
1x Mini-PCIe socket for mSATA
4x Mini-PCIe socket for expansion modules
Power Requirement
▪ATX Power Mode
▪Typical +9V ~ +30VDC Input
▪Power adapter: Optional AC to DC power adapter (+19VDC, 120W)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 3NISE 300 User Manual
Chapter 1: Product Introduction
Dimensions
▪310mm (W) x 212mm (D) x 80mm (H) without Wall-Mount bracket
Environment
▪Operating Temperature:
Ambient with air flow: -5°C to 55°C
(According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
▪Storage Temperature: -40°C to 85°C
▪Operating humidity: 10% ~ 90% relative humidity, non-condensing
Limits to be at 90% RH at max 40°C
▪Shock Protection:
HDD: 20G, half sine, 11ms, IEC60068-27
CFast: 50G, half sine, 11ms, IEC60068-27
▪Vibration Protection w/HDD Condition:
Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64
Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6
Certifications
▪CE/FCC Class A
OS Support List
▪Windows 7 32-bit and 64-bit
▪Windows 8.1 32-bit and 64-bit
Optional Fieldbus Kit
88J50090E00X0 FBI 90E-PNM KIT
(w/25cm Cable) PROFINET Master Module Kit
88J50090E01X0 FBI 90E-EP KIT
(w/25cm Cable) EtherNet/IP Master Module Kit
88J50090E02X0 FBI 90E-ECM KIT
(w/25cm Cable) EtherCAT Master Module Kit
88J50090E03X0 FBI 90E-PBM KIT
(w/25cm Cable) PROFIBUS Master Module Kit
88J50090E04X0 FBI 90E-DNM KIT
(w/25cm Cable) DeviceNet Master Module Kit
88J50090E13X0 FBI 90E-COM KIT
(w/25cm Cable) CANopen Master Module Kit
88J50090E15X0 FBI 90E-S3M KIT
(w/25cm Cable) SERCOSIII Master Module Kit
Optional Module Kit
88J00030004X0 NISE300 3.5G Module Kit
SIERRA: MC8090(SMS) US
88J00030009X0 NISE300 3.5G Module Kit
SIERRA: MC8092(SMS) EU
88J00030009X0 NISE300 WiFi Module Kit
INTEL: 7260.HMWWB.R
Dual Band Wireless-AC 7260,
2x2 AC+BT, HMC
88J00030002X0 NISE300 WiFi Module Kit
INTEL: 7260.HMWBNWB.R
WLAN+ BLUETOOTH
COMBO MODULE
88JK0ECOM03X0 NISKECOM3 UNIVERSAL
KIT (w/25 cm DB26 cable)
Mini-PCIe to 4x COM Module
w/isolation RS232/422/485
Auto Flow Control w/Universal
Bracket
88JK0ECOM07X0 NISKECOM4 UNIVERSAL
KIT (w/25 cm DB26 cable)
Mini-PCIe to 4 PORT RS232
MODULE w/ Universal Bracket

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 4NISE 300 User Manual
Chapter 1: Product Introduction
Knowing Your NISE 300
LAN
9-30V DC Input Fieldbus
Audio
Connectors
Power
Switch
LEDs
Remote
On/Off Switch
DVI-IHDMI CFast
COM1
COM2
USB 2.0
USB 3.0
SIM
Remote On/Off Switch
Used to connect a remote to power on/off the system.
USB 3.0/2.0 Ports
Two USB 3.0 and two USB 2.0 ports to connect the system with USB 3.0/2.0
devices.
COM1 and COM2
Support RS232/422/485 with auto flow control.
Front View
Audio Connectors
A line-out and mic-in port to connect speakers or microphones.
LAN
2 Intel GbE LAN to connect the system to a local area network.
LEDs
Indicates the power status and hard drive activity of the system.
Antenna Cover
Rear View

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 5NISE 300 User Manual
Chapter 1: Product Introduction
9-30V DC Input
Used to plug a DC power cord.
HDMI
Used to connect a high-definition display.
DVI-I
Used to connect a digital LCD panel.
SIM
Used to install a SIM card.
CFast
Used to install a CFast card.
Fieldbus
4 expansion slots for add-on fieldbus modules.
Power Switch
Press to power-on or power-off the system.
Antenna Cover
Used to connect an external antenna for Wi-Fi module.

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 6NISE 300 User Manual
Chapter 1: Product Introduction
Mechanical Dimensions
333
212
310
86.30
80