Next A13343 User manual

Next Retail Ltd, Desford Road, Leicester. LE19 4AT
Page 1 of 4
Tools Needed Assembly Instructions
Pleasekeepthese instructionsforfuturereference
One person assembly
Helpline
If you have any problemswith this product
pleasecontact:
Customer ServicesTel: 03337778185
Regrettably self assembly items cannot be returnedonceassembly is part or fullycompleted
unless the items are found to be faulty. Should you need to returntheunassembled product,
pleaserepack in its original packaging.
A13343 Bronx Corner Shower Caddy
We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
·
Carefully check that you have all the parts before beginning assembly.
·
Keep fittings out of children ’s reach and keep children well away from construction area.
·
We suggest you retain these instructions for future reference.
Maximum weight load kg （lb）
·
Important
Made in China.
·
Made with powder coated steel and plastic suction cups.
·
Product Information
Clean with soap and wateronly and clean the productthoroughly.
·
Do notrub or scrubthe surface when cleaning.
·
Do not use any cleaning agentscontaining solvents, acids or any scouring agents or scrubbing sponges.
·
Care Instructions
WARNING
·WARNING: Always ensure intended wall areato be drilled is free fromhidden electrical wires,water and gas
pipes.
·NB:Wall fixings are not included-please source suitable fixing for your wall type. If in doubt consult a qualified
tradesman.

Next Retail Ltd, Desford Road, Leicester. LE19 4AT
Page 2 of 4
Suction Cups for a flexible storage solution
· Please note the suction cups are only suitable to be used on a smooth surface such as glazed tiles, glass and metal.
· Please ensure the assembly instructions are followed.
· Please check and tighten the cap frequently.
· Clean the surface of the suction cup with warm water then dry thoroughly with a dry cloth before use.
·
·Place the wire product with suction cups like as picture.
Step 2
petS 1
Place the suction cups to the desired area and press firmly like as picture.
Instructions
· Woodor rough wall surfaces aren’t suitable for suction cups and screws and wall plugs should be used instead.
· Use suction cups sticks on smooth flat surfaces or choose to screw to the wall instead.
·Ensure the attachment surface is clean，dry and free from grease,wax and solvents. Clean the area with
warm soapy water and dry thoroughly.

Next Retail Ltd, Desford Road, Leicester. LE19 4AT
Page 3 of 4
· This item can be mounted to the wall. Wall fixings (screws and wall plugs) are not included.
· Please ensure wall material and fixings are suitable before mounting. If unsure, please seek professional advice.
Screws and wall plugs for a more permanent fixture
Fittings and Tools required
A
（not supplied）
B
（not supplied）
·Twist the plastic cap into the suction cups until it tight.
Step 3
Max. load: 3 kg（6.6lb）
After assembly, leave the product on the wall for 12 hours before using it. This helps the suction cups to
adhere better. For increased stability, make sure to retighten the suction cups every month.
3 kg
(6,6 lb)

Next Retail Ltd, Desford Road, Leicester. LE19 4AT
Page 4 of 4
Assembly Diagram
Hold the product in the desired position
and mark drill holes.
A
A
A
A
×4
×4
B
B
B
B