Next 127001 User manual

Tools Needed Assembly Instructions
Pleasekeepthese instructionsforfuturereference
One person assembly
Helpline
If you have any problems with this product
please contact:
Customer Services Tel: [phone]
Regrettably self assembly items cannot be returnedonceassembly is part or fullycompleted
unless the items are found to be faulty. Should you need to returntheunassembled product,
pleaserepack in its original packaging.
127001 WASH SHOWER CADDY
We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
Carefully check that you have all the parts before beginning assembly.
Keep fittings out of children
1.5kg (3.3lb)
’s reach and keep children well away from construction area.
We suggest you retain these instructions for future reference.
Maximum weight load
·
·
·
·
Important
Made in China.
Made with powder coated steel and plastic suction cups.
·
·
Product Information
Clean with soap and wateronly and clean the productthoroughly.
Do notrub or scrubthe surface when cleaning.
Do not use any cleaning agentscontaining solvents, acids or any scouring agents or scrubbing sponges.
·
·
·
Care Instructions
Instructions
WARNING
Suitable for use on smooth surfaces like- glazed ceramic tiles,glass acrylic，metal and stainless steel.·
·Ensure the attachment surface is clean，dry and free from grease,wax and solvents. Clean the area with
warm soapy water and dry thoroughly.
·WARNING: Always ensure intended wall areato be drilled is free fromhidden electrical wires,water and gas
pipes.
NB:Wall fixings are not included-please source suitable fixing for your wall type. If in doubt consult a qualified
tradesman.
Next Retail Ltd, Desford Road, Leicester. LE19 4AT
Next Retail (Ireland) LTD,D02 ED70
Page 1 of 3

Suction Cups for a flexible storage solution
·
·
Ceramic and glass surfaces are suitable for suction cups.
Woodor rough wall surfaces aren’t suitable for suction cups and screws and wall plugs should be used instead.
·Clean the surface of the suction cup with warm water then dry thoroughly with a dry cloth before use.
·Use suction cups sticks on smooth flat surfaces or choose to screw to the wall instead.
·
·Place the wire product with suction cups like as picture.
·Twist the plastic cap into the suction cups until it tight.
Step 2
Step 3
petS 1
Max. load: 1.5 kg（3.3lb）
After assembly, leave the product on the wall for 12 hours before using it. This helps the suction cups to
adhere better. For increased stability, make sure to retighten the suction cups every month.
Place the suction cups to the desired area
and press firmly like as picture.
1.5 kg
(3.3 lb)
Next Retail Ltd, Desford Road, Leicester. LE19 4AT
Page 2 of 3
Next Retail (Ireland) LTD,D02 ED70

Screws and wall plugs for a more permanent fixture
Fittings and Tools required
Assembly Diagram
Hold the product in the desired position
and mark drill holes.
D
BB
C
D
AA
F
×2
×2
（not supplied）（not supplied）（not supplied）（not supplied）（not supplied）（not supplied）
A B C D E F
Next Retail Ltd, Desford Road, Leicester. LE19 4AT
Page 3 of 3
Next Retail (Ireland) LTD,D02 ED70