Next JARVIS 904018 User manual

JARVIS BEDSIDE
904018

supplied
PH2
not supplied
1
To View our full furniture range please visit www.next.co.uk
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Tools required
Time to assemble
Number of people required to assemble
One person are required to assemble this item.
Don’ts
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood
surface. Please make sure you use a placement or coaster.
BEFORE YOU START
1 hour
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well
away from the construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not sit or stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Do’s
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools and plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Due to the size of the product we recommend that it is
assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use.
Wipe occasionally with a soft cloth slightly dampened with
water. Then buff with a dry clean soft cloth.
Wood will mellow and change colour over time, we recommend
that ornaments and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.
JARVIS BEDSIDE
904018
Product supplied with wall fixing brackets.

Ref Dimensions Visual Qty
1
JARVIS BEDSIDE
904018
2 8 x 30 x 30 cm 2
1 44.5 x 36 x 25 cm

JARVIS BEDSIDE
904018
Ref Dimensions Qty Extra
Fittings
A Ø6 x 45mm 10 2
B Ø10 10 2
C Ø16 10 2
D Ø4 x 40mm 2 1
Fixtures and fitting supplied ( not to scale)
Ref Dimensions Visual Qty
E 25 x 27 mm
Brown 2
Black 2
G 2 x 25 x 40 x 62mm 2
H 3.5 x 15 mm 2
F Ø16mm 2

JARVIS BEDSIDE
904018
Ø 6 x 45mm
A x 10
Ø10
B x 10
Ø16
C x 10
Unlock
X2
X2

JARVIS BEDSIDE
904018
25 x 27mm
E x 2
Ø 4 x 40mm
Lock
X2
X2
PH2
D x 2

JARVIS BEDSIDE
904018
G x 2 H x 2 F x 2
PH2
X2
We recommend the use of the wall fixings provided for safety reasons. Please follow the instructions included with the
fixings. N.B. Wall fixings are not included please source suitable fixings for your wall type. If in doubt, please consult a
qualified tradesperson.
WARNING: Always ensure the wall to be drilled is free from hidden electrical wires, water and gaspipes. Please read
separate instructions contained with this part (Y) on the correct way of securing this fixings.

JARVIS BEDSIDE
904018