Next 651855 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
•This item contains glass. Please handle with extreme care.
•BS 7449: 1991.
•Batch No.
GLASS INFORMATION
• This product contains toughened glass of nominal thickness of 6mm conforming to class BS 6206 class A. If a glass
component is chipped or broken replace with glass of the type described. Consult the manufacturer, retailer or agent
with regard to obtaining a manufacturing specification and shape for replacement glass quoting the model number and
batch number or date of manufacture.
• Do not strike the glass with hard or pointed items.
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch
the glass.
• Do not sit or stand upon horizontal glass surfaces.
• Care must be taken when cleaning around the product with a vacuum cleaner to prevent damage to the glass panels.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 people are required to assemble this product.
CARE INSTRUCTIONS
• Do not place very hot or cold items against or in close proximity to the glass surface unless adequately thick insulation
material is used to prevent such items from coming into contact with the glass.
• For general cleaning, periodically dust with a soft cloth.
PRODUCT INFORMATION
• Wall fixings are not included.
• Made from steel with chrome plated finish and toughened glass.
• Not suitable for use in bathrooms.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to
be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Do not rub or scrub the surface when cleaning.
• Made in China.
COLLECTION CLEAR TALL SHELF 651855
Page 1 of 4

1 . Lay the frames on a carpeted floor. Using
Connecting Rod (5) attach Front Frame (3) and Back
Frame (4).
PARTS
STEP ONE
FITTINGS
C. Allen key × 1
4MM
(1). Long Shelf×3
(3).Front frame×1
A.Bolts x 24
M6X10mm
B.Metal Washer x 24
M6
D.Plastic Sucker × 24
(2). Short Shelf×3
(4).Back frame×1
(5).Connecting rod ×12
E. Wall Brackets × 2
Page 2 of 4

Attach the Wall Brackets to wall once the item has
been placed into the required position using
appropriate screws, washers and wall plugs for your
wall type.
WARNING: Ensure the area to be drilled is free from
hidden electrical wires and water or gas pipes.
NOTE: Wall fixings are not included. Source suitable
fixings for your wall type, if in doubt consult a
qualified tradesperson.
1.Turn the shelf upright
2. Place the plastic Sucker cap (D) x 24 into each
hole on the frame.
1.Place Long Shelf (1) x 3 and Short Shelf (2) x 3
into position.
STEP FOUR
STEP TWO
STEP THREE
1. Assemble with Bolt A x 24, Washer B x 24, and
tighten with Allen Key (C ). Bolt the Wall Bracket (D) x
2 on the back side of the shelf.
Page 3 of 4

Next Retail Ltd, Desford Road, Leicester, LE19 4AT
YOUR SHELVING IS NOW READY FOR USE
Page 4 of 4