Next SIMPSON 749477 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• For general cleaning, periodically dust with a soft cloth.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Do not put hot dishes directly on the surfaces of the item.
• Do not rub or scrub the surface when cleaning.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is foundto be faulty. Should you
the unassembled product, please repack in the original packaging
• We recommend that the packaging is used to protect the surfaces during assembly.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or damage.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• A minimum of 2 persons are required to assemble this product.
PRODUCT INFORMATION
• Made from Glass and metal.
• Made in China.
CARE INSTRUCTIONS
• Do not use abrasive cleaning products or those containing silicone.
SIMPSON WHITE METAL CONSOLE TABLE 749477
Page 1 of 4

FITTINGS
PARTS
B.Bolts x 8
M6 x 30mm
A.Bolts x 4
M8 x 40mm
E.Allen key x 1
M4
F.Spring Washer x 6
M8
(1)Glass top x 1
(2)Left Leg x 1
(3)Right Leg x 1
(6)Cap x 2
(4）frame x 1
(5) Connecting rod x 1
D.washer x 8
C.Spring Washer x 8
M6
G.Bolt x 2
M8 x 30mm
Page 2 of 4

1. Insert cap (6) x 2 to both sides of the leg.
STEP TWO
(2) Use bolt (A) x4, Spring Washer (F)x4 to fix the frame (4)
onto Left Leg (2) and Right Leg (3) and tighten with Allen
Key (E).
STEP ONE
(1) Use bolt (G) x 2, spring washer (F) x 2 to fix the
Connecting rod (5) onto Left Leg (2) and Right Leg (3)
and tighten with Allen Key (E).
Page 3 of 4

NOTE: Wall fixings are not included. Source suitable
fixings for your wall type, if in doubt consult a qualified
tradesperson.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
1. Put the glass top upside down on carpet floor, and put
the feet section onto the glass top and align the holes.
2. Use bolt (B) x 8, spring washer (C) x 8 and washer( D ) x
8 to fix the leg onto the glass top and tighten with Allen
Key (E).
3. Turn the table upright
STEP THREE
STEP FOUR
WARNING: Ensure the area to be drilled is free from hidden
electrical wires and water or gas pipes.
This item comes with a pre-fitted wall attachment strap.
Attach the end of the wall attachment strap to the wall
once the item has been placed into the required position
using an appropriate screw, washer and wall plug for your
wall type
Page 4 of 4