Next 783184 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
Batch No. 151289 / 05 / 08
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Do not use this item if any structual part is broken or missing.
• All assembly fittings should always be tightened properly. Screws should not be loose because a child can squeeze
parts of the body, or clothing (e.g. strings, necklaces, ribbons for babies, dummies, etc.) could get caught. There
could be danger of strangulation.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Do not place very hot or cold items against or in close proximity to the glass surface unless adequately thick
insulation material is used to prevent such items from coming into contact with the glass.
• Do not strike the glass with hard or pointed items.
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch
the glass.
• Do not sit or stand upon horizontal glass surfaces.
GLASS INFORMATION
•This item contains glass. Please handle with extreme care.
• If the glass is chipped or broken, stop using the product and consult the manufacturer or supplier.
• This product contains toughened glass of a nominal thickness of 12mm conforming to BS 6206 class A, If a glass
component is chipped or broken replace with the glass as decribed.
FITTINGS
Glass Table 783184
Page 1 of 2

1.Insert 4 x threaded rod( A )in to glass top as shown
1.Attach leg 2 (x4) into the assembled unit.
2.Fix the legs with flat washer( D), lock washer(C)
nut(B) Tightening with socket wrench(E)
1.With the help of an assistant ,Carefully lift the table
upright
STEP ONE
STEP TWO
STEP THREE
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
PARTS
Page 2 of 2