Next 881840 User manual

881840 SLIDE SMALL OAK CARCASS
1 of 14 1/14 P4DS73 K5
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY
IMPORTANT
• We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly .
• Keep ttings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly .
• A minimum of 2 persons is required to assemble this product.
• We recommend the use of the wall attachment bracket for safety reasons.
Helpline
If you have any problems with this
product or require any replacement
ttings please contact Customer
Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer nish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately .
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the oor as this will cause damage to the joints.
All assembly xings should always be tightened properly and periodically check all xings and
tighten if necessary.
• The nish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.

2 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
REQUIRED ASSEMBLY SPACE
FLOOR AREA
3.0 M x 3,0 M
1.5 hrs
DESCRIPTION:
Assembly
Instruction
1500 mm
2056 mm
611 mm
881840 SLIDE SMALL OAK CARCASS
2/14 P4DS73 K5
2 of 14

PARTS LIST
NO PART LIST QTY
.
DESCRIPTION:
Assembly
Instruction
1
2
2
3
4
4
5
5
9
8
11
11
K
M
O
6
6
7
10
(1) BOTTOM PANEL 1
(2) PLINTH 2
(3) LEFT SIDE PANEL 1
(4) LEFT BACK PANEL 2
(5) RIGHT BACK PANEL 2
(6) HORIZONTAL FRAME 2
(7) VERTICAL DIVIDER 1
(8) TOP PANEL 1
(9) HORIZONTAL SLAT 1
(10) RIGHT SIDE PANEL 1
(11) HORIZONTAL DIVIDER 2
3/14 P4DS73 K5
PACK 1 CONSISTS OF PARTS :
1, 2, 6, 8, 9, 11, M, O,
AI, Fittings .
PACK 2 CONSISTS OF PARTS :
3, 4, 5, 7,10, K.
3 of 14
881840 SLIDE SMALL OAK CARCASS

HARDWARE LIST
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
8x
1x
4x
4x 3,0x13mm
SHORT
BOLT
GLUE
SCREW
CLOTHES BAR
SUPPORT
1:2
GG1
F
A
12x 12x
4,2x13mm
SCREW
BACK PANEL
SUPPORT
JJ1
2x
L=720mm
CLOTHES BAR
M
1:2
BAG 8
BAG 1 BAG 1
BAG 1 BAG 2 BAG 2
K
2x
BACK PANEL
CONNECTOR
L=1974mm
14x
CAM BOLT
E
B1
++
16x
CAM LOCK
C
16x
3x
8x28mm
DOWEL
FEET
D
B
BAG 1
BAG 8 BAG 1 BAG 1
BAG 8
Ø5x39mm Ø15x12mm
L=24/40mm
1x
DOUBLE CAM BOLT
I
BAG 1
H
8x45mm
DOWEL
BAG 1
1x
3x 2x
7x50mm
CONFIRMAT
SCREW
CONFIRMAT
COVER
LL1
BAG 1 BAG 1
6x
3,5x13mm
SCREW
DO NOT MIX CONTENT OF HARDWARE BOXES
4/14 P4DS73 K5
4 of 14
881840 SLIDE SMALL OAK CARCASS

HARDWARE LIST DO NOT MIX CONTENT OF HARDWARE BOXES
WHEN CARCASS IS ASSEMBLED PLEASE REFER TO FURTHER
INSTRUCTIONS INCLUDED WITH THE DOORS
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
T
L=2030mm
BAG 8
3x
ANTI-DUST STRIP
INTERNAL DOOR ROLL
WITH BRAKE
EXTERNAL DOOR ROLL
LOWER FITTING
INTERNAL DOOR
LOWER FITTING
EXTERNAL DOOR
PLASTIC SLEEVE
FOR BRAKE
1x
2x
2x
2x
1x
Q1
U
Q2
U1
S
BAG 3
BAG 5
BAG 6
BAG 3 BAG 7
4x
2x
3,5x13mm
90x40x15mm
SCREW
BAG 9 BAG 9
WALL BRACKET V1
V
1:2
6x
3,5x13mm
SCREW
INTERNAL DOOR ROLL
O1
BAG 8
NP1
P
16x 3x
1x
Ø15mm Ø10mm
Ø10mm
CAM COVER COVER
ALLAN WRENCH
UPPER RUNNER
BAG 1 BAG 8
BAG 8
1x
O
L=1469mm
28x
1x 6,3x11mm
SCREW
R
QBAG 3
BAG 4
BAG 5
BAG 6
BAG 7
BAG 4
5/14 P4DS73 K5
5 of 14
881840 SLIDE SMALL OAK CARCASS