1
WARNINGS
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as necessary.
Please do not jump or stand on your bed.
Avoid exposing the furniture to excessive heat or direct sunlight as
this can cause cracking of the wood and deterioration of the colour.
Keep away from strong heat source.
Do not use this item if components are missing or broken.
Do’s
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the right tools,
plenty of space.
Unwrap all packaging materials and place the components on a
clean surface to protect them from damage. We recommend that the
packaging is used to protect the surface during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all fixings
are fully tightened before use. Check fixings regulaly to ensure they
remain tight.
Always ensure that protectors are used on the legs according to your
flooring type.
When adjusting the support legs ensure that the foot is set 10mm
from the floor surface without the mattress in place. When in use the
legs will create the required support.
To clean your item, please use a soft cloth slightly dampened with
water and wipe clean. Then buff with a dry clean cloth.
Don’ts
Do not drag your assembled bed. Always lift the bed and check
that the center support rail is securely fixed in place.
Apply adhesive substrates of example, sticky tape to the
product.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish.
Number of people required to assemble
Two people required to assemble
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with you product please contact our
customer service team on 0333 777 8999.If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail ltd,
Desford Road,
Leicester,
LE19 4AT,
To view our furniture range please visit www.next.co.uk
BEFORE YOU START
Time to assemble:30 minutes
Produced in China for Next Retail Ltd
D22058-2022-V1
Tools required
(Not supplied) (Not supplied)
ARDEN BED FRAME
D22058
Assembly instructions
