Next 784988 User manual

ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
IMPORT ANT
• We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep ttings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• We recommend the use of the wall attachment bracket for safety reasons.
Helpline
If you have any problems with this
product or require any replacement
ttings please contact Customer
Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer nish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately .
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the oor as this will cause damage to the joints.
All assembly xings should always be tightened properly and periodically check all xings and
tighten if necessary.
• The nish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.
1 of 22 P5--XM80
784988 OAK FOIL HIGH SLEEPER

3 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
REQUIRED ASSEMBLY SPACE
FLOOR AREA
3.0 M x 3,0 M
2 hrs
Assembly
Instruction
880598 WHITE HIGHSLEEPER
DESCRIPTION:
2
2005 mm
1085 mm
1780 mm
of 22 P5--XM80

PARTS LIST
DESCRIPTION:
Assembly
Instruction
880598 WHITE HIGHSLEEPER
3
1
2
3
4
5
6
7
8
9
10
11
12
13 14
15
16
17
17
18
No. PARTS LIST QTY
(1) HEADBOARD - R
(2) HEADBOARD - L
(3) LOWER BACK APRON
(4) TOP PANEL
(5) SIDE - L
(6) SIDE - R
(7) UPPER BACK APRON
(8) UPPER FRONT APRON - SHORT
(9) UPPER FRONT APRON - LONG
(10) BOTTOM PANEL
(11) BACK PANEL
(12) FRONT FLAP
(13) LADER STEPS
(13.1) SUPPORT LADER STEPS
(14) SIDE LADER - L
(15) SIDE LADER - R
(16) INSET APRON FRONT
(17) BAR UPPER APRON
(18) UPPER BOTTOM
(19) SEAT
19
1
1
1
1
1
1
1
1
1
1
1
1
5
5
1
1
2
2
1
1
13.1
of 22 P5--XM80

HARDWARE LIST DO NOT MIX CONTENT OF HARDWARE BOXES
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
880598 WHITE HIGHSLEEPER
4
++
B
x41
15x12,5
CAM LOCK
A
x27
CAM BOLT
5x39
K
x24
4x40
SCREW
C
x32
8x28
DOWEL
1:2
F
x2
HINGE PLATE
G
x4
6,3x13
SCREW
1:2
I
x4
SCREW
4x13
BAG 1
BAG 1
BAG 2
BAG 1
BAG 3 BAG 3
BAG 3
C1
x38
8x35
DOWEL
BAG 1
D
x7
8x35
DOWEL
BAG 1
E
x7
BAG 2
H
x2
26
HINGE
BAG 3
J
x32
BAG 2
L
x7
M6X70
SCREW
BAG 2
M
x1
BAG 2
1:2
P
x2
3,5x13
SCREW
BAG 4
N
x1
BAG 4
O
x2
BAG 4
R
x14
3,5x35
SCREW
BAG 2
7x50mm
CONFIRMAT
SCREW
Strap Washer
f18
of 22 P5--XM80

HARDWARE LIST DO NOT MIX CONTENT OF HARDWARE BOXES
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
880598 WHITE HIGHSLEEPER
5
HANDLE
S
x1
T
x1
wpm4x20
SCREW
BAG 5 BAG 5
f60
Cap
U
x1
BAG 4
Q
x3
GLUE
BAG 1
1:4
of 22 P5--XM80

DESCRIPTION:
Assembly
Instruction
880598 WHITE HIGHSLEEPER
Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture,
as once assembed, the furniture is exempt from our home approval policy.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we recommend
that the product is placed on a protected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may damage
the product ..
Care and Maintenance of your Furniture
Please periodically check all fittings and re-tighten as necessary.
Please do not jump on your furniture.
To clean your item, please use a damp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or
finishes to de-laminate.
6 of 22 P5--XM80

SCREW IN CAM SCREWS
ONLY DOWN TO FIRST RING.
FLUSH
WITH
PANEL
1
PRESS PANELS TOGETHER ALIGNING
DOWEL WITH HOLES, CAM SCREWS WITH LOCKS.
3
TO SECURE PANELS,
TURN CAM LOCKS 1/2 TURN CLOCKWISE.
4
CAM SHOWN IN
LOCKED POSITION.
++
++
PRESS IN CAM LOCKS. ARROW ON CAM
LOCK MUST FACE HOLE IN PANEL EDGE.
DO NOT INSERT DOWELS
IN CAM SCREW / LOCK HOLES.
2
++
++
DESCRIPTION:
Assembly
Instruction
880598 WHITE HIGHSLEEPER
7 of 22 P5--XM80

DESCRIPTION:
Assembly
Instruction
880598 WHITE HIGHSLEEPER
8
a)
B
A
b)
A
c)
C
C
Instructions for hinge adjustment
a) Side adjustment:
b) Depth adjustment:
c) Height adjustment:
Loosen fixing screw "A", adjust gap with screw "B" and retighten
screw "A".
Loosen fixing scerw "A", push hinge arm forwards or backwards,
Loosen screw "C", adjust height, retighten screw "C".
retighten screw "A", fix screw "B" with a 1/4-turn in clock-wise
direction.
of 22 P5--XM80

DESCRIPTION:
Assembly
Instruction
1
880598 WHITE HIGHSLEEPER
9
A
A
A
A
A
A
A
x13
1
2
of 22 P5--XM80

DESCRIPTION:
Assembly
Instruction
2
880598 WHITE HIGHSLEEPER
10
C
x4 B x10
++
++
++
++
++
C1
B
B
3
++
A
A
A
C
C
B
4
C1
x2
A
x3
Q
Q
x1
of 22 P5--XM80