Next 788685 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is partly or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• Wall fixings are not included.
• Do not use this item if any structual part is broken or missing.
• We recommend the use of the wall attachment strap provided for safety reasons.
PRODUCT INFORMATION
• Made from MDF with painted finish.
• Made in Poland.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
• Avoid keeping furniture in direct sunlight or close to a heat source as this can cause cracking, discolouration or
warping.
• Do not use furniture polish.
• Do not rub or scrub the surface when cleaning.
• Any spills should be removed with a soft, clean, damp, cloth and dried immediately.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Assembly fixings should always be tightened properly and they should be periodically checked and tightened if
necessary.
788685 HEARTS & STARS DOUBLE ROBE
Page 1 of 9 788685 double robe 01

FITTINGS
PARTS
Page 2 of 9 788685 double robe 01

1. Insert 8 x cambolts (B) into side panels 1 & 2.
2. Insert 12 x camlocks (C) into side panels 1 & 2.
3. Insert 2 x hinge (L) into side panels 1 & 2 using 2 x
screws (LA) tighten with a screwdriver.
1. Insert 6 x camlocks (C) into partition 4.
2. Insert 4 x camlocks (C) into rails 3 & 5
3. Insert 4 x wooden dowels (A) into rails 3 & 5
1. Attach partition 4 and rails 3 & 5 to side panels 1.
2. Place back panel 6 into the grooves in the back of
the side panels 1 and partition 4 and rail 5.
3. Attach side panel 2 to the assembled unit.
4. Tighten the camlocks (C) to lock cambolts (B).
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
STEP ONE
STEP TWO
STEP THREE
Page 3 of 9 788685 double robe 01

1. Insert 6 x cambolts (B) into bottom panel 7.
1. Place back panel 6 into the grooves in the back of
the side panels & partition.
3. Attach the assembled unit bottom panel 7.
2. Tighten the camlocks (C) to lock cambolts (B).
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
1. Attach rail 8 to bottom panel 9 using 3 x screws (M).
STEP FOUR
STEP FIVE
STEP SIX
Page 4 of 9 788685 double robe 01

1. Insert 6 x cambolts (B) into top panel 7.
1. Place back panel 6 into the grooves in the back of
the side panels the grooves in the rail.
2. Attach top panel 9 to the assembled unit.
3. Tighten the camlocks (C) to lock cambolts (B).
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
1. Secure back panels 5 (x2) using 18 back panel
connectors (D):
x2 into top panel
x12 into side panel
x4 into partition
x2 into bottom panel
STEP EIGHT
STEP NINE
STEP SEVEN
Page 5 of 9 788685 double robe 01

1. Attach drawer panels 11 & 12 to drawer front 15.
Tighten the 4 x camlocks (CD) to lock cambolts (B)
and tighten with a screwdriver.
3. Slide drawer bottom panel 13 in to the grooves in
the drawer side panel.
4. Attach drawer back panel 10 to drawer side panels
11 & 12 and to supporting bottom drawer bar 14 using
6 x screws (E) tighten with a screwdriver.
5. Repeat previuos four steps to produce a second
drawer using drawer front 16.
1. Secure drawer bottom panel 13 using 4 x back
panel connectors (D):
2 x into drawer front panel,
2 x into drawer back panel.
1. Insert each drawer into assembled unit.
2. Attach 4 x handles (G) to drawer front panels, using
4 x screw (GA) and tighten with a screwdriver.
STEP TEN
STEP ELEVEN
STEP TWELVE
Page 6 of 9 788685 double robe 01

1. Insert 3 x guide hinges (IB) into side panel 1 and
tighten with a screwdriver.
2. Insert 3 x guide hinges (IB) into side panel 2 and
tighten with a screwdriver.
3. Insert 2 x resistance to the door (Z) to partytion.
You can adjust the depth of the door by turning the 2
x screw (Z) .
1. Attach 3 x hinges (IA) to the door 17 using the 6 x
screw (J) and tighten with a screwdriver.
2. Repeat steps with next door 18.
STEP THIRTEEN
STEP FOURTEEN
Page 7 of 9 788685 double robe 01

1. Attach the doors to side panels. Insert cabinet
hinge (IA) to guide hinge (IB) and tighten with a
screwdriver.
2. Adjust the hinges
a) side to side b) front to back c) up & down
3. Insert hanging rail 19 into the assembled unit.
1. Attach 2x handles (G) to doors 2 x screw (GA) and
tighten with a screwdriver.
2. Attach 2x stars (HA) or hearts (HB) or footballs (HC)
to doors using 2 x wooden dowel (HD) and 2 x screw
(HE) and tighten with a screwdriver.
STEP FIFTEEN
STEP SIXTEEN
STEP SEVENTEEN
Page 8 of 9 788685 double robe 01

1. Attach wall strap (QA) to the assembled unit using 1
x washer (QB) and 1 x screw (QC).
WARNING: Always ensure the area to be drilled is free
from hidden electrical wires, water and gas pipes.
NOTE: Wall fixings are not included, please source
suitable fixings for your wall type. If in doubt please
consult a qualified trades person.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 9 of 9 788685 double robe 01