Next BARLOW EXTENDING DINING TABLE 864803 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Made in Indonesia.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Carefully check that you have all parts before beginning assembly.
or damage.
• Ensure the mats and coasters used do not have an abrasive surface underneath.
• Do not put hot dishes directly on the surfaces of the item.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• A minimum of 2 persons is required to assemble this product.
• We recommend that the packaging is used to protect the surfaces during assembly.
PRODUCT INFORMATION
• Made from particleboard,MDF with a wood effect finish.
4X
864803 BARLOW EXTENDING DINING TABLE
GLUE
2X
5
6
4
4
6
6
4
6
GLUE
4
4
6
GLUE
1R
1L
2
1L
1R
2
2
1L
1R
2
1L
1R
UNLOCK LOCKED
1L
1R
UNLOCK LOCKED
2
1L
1R
3
3
42x
2x
6
32x
GLUE
53
5
1L
41R
4
1L
4
4
1L
43
6
4
61R 5
3
3
5
1L
3
3
1R 5
3
3
1 of 7

PARTS
Gx8 Hx8 Ix8 Jx1 Kx1
1Lx1 1Rx1 2x1
3x4 4x2 5x2
6x2
M8 mm M8 mm
Ax4 Bx4 Cx32 Dx4 Ex12 Fx8
15X12 mm 7,5X32 mm 8X40 mm 260 mm F10X50 mm M8X85 mm
FITTINGS
4X
GLUE
2X
5
6
4
4
6
6
4
6
GLUE
4
4
6
GLUE
1R
1L
2
1L
1R
2
2
1L
1R
2
1L
1R
UNLOCK LOCKED
1L
1R
UNLOCK LOCKED
2
1L
1R
3
3
42x
2x
6
32x
GLUE
53
5
1L
41R
4
1L
4
4
1L
43
6
4
61R 5
3
3
5
1L
3
3
1R 5
3
3
2 of 7

1. Insert 4x cambolts (B) into the holes of panels 4 (x2).
STEP THREE
STEP ONE
1. Insert 8x bolts (F) into driving nuts fixed on panels 3 (x4)
and turn bolts (F) clockwise by hand until tight.
STEP FOUR
1. Glue and Insert 8x wooden dowels (C) into the end of
rails (D) (x4).
2. Glue and Insert 8x wooden dowels (C) into the end of panels 4 (x2).
1. Glue and Insert 8x wooden dowels (C) into the end of
panels 5 (x2).
STEP TWO
4X
GLUE
2X
5
6
4
4
6
6
4
6
GLUE
4
4
6
GLUE
1R
1L
2
1L
1R
2
2
1L
1R
2
1L
1R
UNLOCK LOCKED
1L
1R
UNLOCK LOCKED
2
1L
1R
3
3
42x
2x
6
32x
GLUE
53
5
1L
41R
4
1L
4
4
1L
43
6
4
61R 5
3
3
5
1L
3
3
1R 5
3
3
3 of 7

1. Glue 4x wooden dowels (C) on panel 5.
2. Attach panels 3 (x2) to the panel 5.
4. Repeat the above steps for another 2x panel 3 and panel
5.
1. Glue 8x wooden dowels (C) on panel 6 (x2).
1. Attach 4x rails (D) to the panels 4 (x2).
STEP FIVE
1. Insert 4x camlocks (A) into the holes of panels 6 (x2) and
ensure that arrow indicator is pointing towards the panel
edge before tightening with a cross-head screwdriver.
3. Cover 2x metal pieces (G) on to 2x bolts (F), using 2x
washers (H) and tighten 2x nuts ( I ), turn clockwise with a
spanner (K) until tight.
STEP SIX
STEP EIGHT
STEP SEVEN
2. Attach panel 4 (x2) to the panel 6 (x2) by using 8x camlocks (A), turn clockwise with a cross-head screwdriver to
secure all panels together.
2. Glue and Insert 8x wooden dowels (C) into the end of
panel 6 (x2).
4X
GLUE
2X
5
6
4
4
6
6
4
6
GLUE
4
4
6
GLUE
1R
1L
2
1L
1R
2
2
1L
1R
2
1L
1R
UNLOCK LOCKED
1L
1R
UNLOCK LOCKED
2
1L
1R
3
3
42x
2x
6
32x
GLUE
53
5
1L
41R
4
1L
4
4
1L
43
6
4
61R 5
3
3
5
1L
3
3
1R 5
3
3
4 of 7

1. Glue 8x wooden dowels (C) on panel 4 (x2).
2. Turn the unit upright, lifted by 2 persons.
(See diagrams on page 7)
STEP TEN
STEP NINE
1. Attach another assembled unit (panel 3 & 5) to the main body, cover 2x metal pieces (G) on to 2x bolts (F), using 2x
washers (H) and tighten 2x nuts (I), turn clockwise with a spanner (K) until tight.
STEP ELEVEN
2. Attach assembled unit to the panel 1L and 1R by tightening 12x screws (E), turn clockwise with a cross-head
screwdriver to secure all panels together.
1. Attach assembled unit (panel 3 & 5) to the main body, cover 2x metal pieces (G) on to 2x bolts (F), using 2x washers
(H) and tighten 2x nuts (I), turn clockwise with a spanner (K) until tight.
4X
GLUE
2X
5
6
4
4
6
6
4
6
GLUE
4
4
6
GLUE
1R
1L
2
1L
1R
2
2
1L
1R
2
1L
1R
UNLOCK LOCKED
1L
1R
UNLOCK LOCKED
2
1L
1R
3
3
42x
2x
6
32x
GLUE
53
5
1L
41R
4
1L
4
4
1L
43
6
4
61R 5
3
3
5
1L
3
3
1R 5
3
3
5 of 7

- Release safety lock underneath the table.
- Gently pull out panel 1 (side table), left and right
- Gently lift up panel 2.
- Attach panel 2 to the assembled unit .
(see and ensure the direction of panel 2)
- Make sure panel 1 and 2 are flat.
- Release safety lock underneath the table.
- Gently pull out panel 1 (side table), left and right.
- Turn the panel 2.
(see and ensure the direction of panel 2)
- Gently set down panel 2 in place.
- Close panel 1 by slide the side table right and left.
- Using safety locks to ensure table top will not move while
using.
TO OPEN THE TABLE
TO CLOSE THE TABLE
- Using safety locks to ensure table top will not move while
using.
4X
GLUE
2X
5
6
4
4
6
6
4
6
GLUE
4
4
6
GLUE
1R
1L
2
1L
1R
2
2
1L
1R
2
1L
1R
UNLOCK LOCKED
1L
1R
UNLOCK LOCKED
2
1L
1R
3
3
42x
2x
6
32x
GLUE
53
5
1L
41R
4
1L
4
4
1L
43
6
4
61R 5
3
3
5
1L
3
3
1R 5
3
3
1
2
3
1
2
3
4
6 of 7

Do use an extra person to help turn the
table. Do not lift the table by the legs.
PLEASE KEEP THIS CARE GUIDE FOR FUTURE REFERENCE
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Once the table legs have been attached.
4X
GLUE
2X
5
6
4
4
6
6
4
6
GLUE
4
4
6
GLUE
1R
1L
2
1L
1R
2
2
1L
1R
2
1L
1R
UNLOCK LOCKED
1L
1R
UNLOCK LOCKED
2
1L
1R
3
3
42x
2x
6
32x
GLUE
53
5
1L
41R
4
1L
4
4
1L
43
6
4
61R 5
3
3
5
1L
3
3
1R 5
3
3
7 of 7