Next COMPTON 377962 User manual

Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
H144 x W85 x D75cm
IMPORTANT ─RETAIN FOR FUTURE REFERENCE
Actual product size
COMPTON
377962
Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
COT BED

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose fixtures and fittings straight
into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

not supplied
3
BEFORE YOU START
To View our full furniture range please visit www.next.co.uk
Time to assemble
LE19 4AT
Leicester,
Desford Road,
Next Retail Ltd,
Home Customer Services
You can write to us at
the product where possible and recommend further action.
an independant home service technician to review and repair
If you have had the product for more than 28 days we will send
home to assess the fault and repair the product where possible.
refund or for a fully trained home service technician to visit your
product for 28 days or less you may be offered a replacement,
to you free of charge.
Tools required
and they will be happy to arrange for a replacement to be sent
0333 777 8999
Two people are required to assemble this item.
1 hours
Number of people required to assemble
READ CAREFULLY.
FUTURE REFERENCE -
IMPORTANT - RETAIN FOR
please contact our customer service team on
If you are missing any fixtures and fittings for your product
Missing parts
If you have had the
0333 777 8999.
customer service team on
If you have a fault with your product please contact our
Home service technicians
WARNINGS
Do not place this child’s bed near heat sources, windows and
other furniture.
Do not use this child’s bed if any part is broken, torn of
missing.
Assembly by adult only.
Once assembled this bed is not designed to be
disassembled and reassembled. Children are likely to play,
bounce, jump and climb on beds, therefore the child’s bed
should not beplaced too close to other furniture or windows,
blind cords, curtain pulls or other strings or cords andshould
be placed either tight to any wall or have a gap of 300mm
between the wall and the side of thebed. This size of the
mattress to be used with the child’s bed is 1400mm x700mm.
Not suitable for children under 4 years (junior beds only).
Do’s
When you are ready to start, make sure that you have the right
tools and plenty of space. Due to the size of the product we
recommend that it is assembled in the room intended for use.
Unwrap all packaging materials and place the components on
a clean surface to protect it from damage, We recommend that
the packaging is used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly. Please periodically check all fittings and re-tighten
as necessary. To clean your item, wipe with soft cloth slightly
dampened with water. Then buff with a dry clean cloth.
Routinely check that the fittings are secure and tighten any
fittings using the appropriate tools If any parts are missing
please contact Next to obtain replacements. Under no
circumstances should missing parts or hardware be substituted
unless obtained from Next.
This child’s bed conforms to BS8509:2008 +
A1:2011 and BS 71 :2008+A1:2013
Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
6
Do not use more than one mattress in this cot.
The lowest adjustable position is the safest, the cot should
always be used in this configuration once the baby is old
To prevent injury from falls, the cot shall no longer be used
enough to sit up.
by the child when the child is able to climb out of the cot.
Once the mattress is placed on the bed base make sure the
gap between the mattress and the side and ends cannot
exceed 30mm.
Do not leave anything in the bed which could provide a
foothold or prevent a danger of suffocation or strangulation.
Assembly fittings should always be tighten properly and care
should be taken that no screws are loose to ensure baby
The mattress chosen shall be such that the internal height
(surface of mattress to upper edge of bed frame) is at least
500mm in the lowest position of the bed base and at least
200mm in the highest position of the bed base.
COMPTON
377962
COT BED

4
GETTING TO KNOW YOUR PRODUCT
Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
2
Components supplied. Please use this guide if you require replacement parts.
QtyVisualDimensionsRef Ctn
2
75 x 55cm11
140 x 69.3cm3
75 x 30cm212
12
140 x 71.4cm42
COMPTON
377962
COT BED

Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
10 130 1201101009080706050403020
mm
5
supplied (actual size)
DimensionsRef Qty
8
8 x 36mmA
6 x 60mm
Fixtures and fittings
B
C
D
E
6 x 63mm
10 x 13mm
15 x 49mm
6
16
16
4
Dimensions
Fixtures and fittings supplied(not to scale)
1
Ref QtyVisual
F45 x 35mm
COMPTON
377962
COT BED

6
E x 4
15 x 49mm
B x 6
1
6 x 60mm
2
Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
A x 8
8 x 36mm
COMPTON
377962
COT BED

7
C x 8
36 x 63mm
Assembly instructions
656166 - 2014 - V1
D x 8
10 x 13mm
COMPTON
377962
COT BED

8
Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
4D x 8
10 x 13mm
COMPTON
377962
COT BED

5
Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
9
C x 8
6 x 63mm
COMPTON
377962
COT BED

6
7
Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
10
C x 8
6 x 63mm
D x 8
10 x 13mm
COMPTON
377962
COT BED

Assembly instructions
Produced in Poland for Next Retail Ltd
656166 - 2014 - V1
11
750 mm
1444 m
m
850 mm
COMPTON
377962
COT BED