Next LOFT 865283 User manual

1 of 14 P5--MK 43
865283 LOFT CHEST
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
Helpline
If you have any problems with this
product or require any replacement
fittings please contact Customer
Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
All assembly fixings should always be tightened properly and periodically check all fixings and
tighten if necessary.
• The finish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.

2 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
REQUIRED ASSEMBLY SPACE
FLOOR AREA
1.5 M x 1.5 M
1 hr
DESCRIPTION:
851 mm
420 mm
778 mm
Assembly
Instruction
865283 LOFT CHEST
2 of 14 P5--MK 43
ATTENTION!!
High-gloss finish item !
865283 White gloss
After completed assembly remove carefully protective foil from the fronts.
DO NOT USE SHARP TOOLS!
7
13 14

DESCRIPTION:
PARTS LIST
5
11
11
16
10L
10L
15L
10R
10R
15R
12
12
12
79
13
14
(1) BOTTOM PANEL 1
(2) PLINTH 1
(3) LEFT SIDE PANEL 1
(4) RIGHT SIDE PANEL 1
(5) BACK PANEL 1
(6) TOP PANEL 1
(7) BOTTOM DRAWER FRONT 1
(8) SLAT ( OPTION OAK ) 3
(9) SLAT (OPTION WHITE ) 3
(10L) LEFT DRAWER SIDE 2
(10R) RIGHT DRAWER SIDE 2
(11) DRAWER BACK 2
(12) DRAWER BOTTOM 3
(13) MIDDLE DRAWER FRONT 1
(14) TOP DRAWER FRONT 1
(15L) TOP LEFT DRAWER SIDE 1
(15R) TOP RIGHT DRAWER SIDE 1
(16) TOP DRAWER BACK 1
NO PART LIST QTY
.
33
4
6
1
2
2
Assembly
Instruction
865283 LOFT CHEST
OPTION OAK OPTION WHITE
8
3 of 14 P5--MK 43

HARDWARE LIST
DO NOT MIX CONTENT OF HARDWARE BOXES
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
8x
CAM BOLT
A
++
8x
CAM LOCK
D
11x
8x28mm
DOWEL
B
BAG 1 BAG 1
BAG 1 3x Left / 3x Right
L=350mm
ROLLER RUNNER
C
6x
18x 3,5x13mm
6x11 mm
SCREW
SCREW
F
E
BAG 2
BAG 2 BAG 2
10x
PLASTIC
SUPPORT
BAG 1
G
L
18x
3x13mm
SCREW
BAG 2
6x
4x30mm
SCREW
J
BAG 3
6x
CAM BOLT
I
++
6x
CAM LOCK
H
12x10mm
5x35mm
BAG 3 BAG 3
Assembly
Instruction
ATTACH TO DRAWER
ATTACH TO CARCASS
865283 LOFT CHEST
27x
2,5x12mm
SCREW
K
BAG 1
1x
2x
1x 3,5x13mm
Ø15mm
10x150mm
SCREW
WASHER
BAG 4 BAG 4 BAG 4
TAPE
P
O
N
1:2
3x
L=338mm
DRAWER BOTTOM SUPPORT
M
BAG 2
4 of 14 P5--MK 43

Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture,
as once assembled, the furniture is exempt from our home approval policy.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we recommend
that the product is placed on aprotected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may damage
the product .
Care and Maintenance of your Furniture
Please periodically check all fittings and re-tighten as necessary.
Please do not jump on your furniture.
To clean your item, please use adamp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to
warp or finishes to de-laminate.
DESCRIPTION:
Assembly
Instruction
865283 LOFT CHEST
5 of 14 P5--MK 43

DESCRIPTION:
SCREW IN CAM SCREWS
ONLY DOWN TO FIRST RING.
FLUSH
WITH
PANEL
1
PRESS PANELS TOGETHER ALIGNING
DOWEL WITH HOLES, CAM SCREWS WITH LOCKS.
3
TO SECURE PANELS,
TURN CAM LOCKS 1/2 TURN CLOCKWISE.
4
CAM SHOWN IN
LOCKED POSITION.
++
++
PRESS IN CAM LOCKS. ARROW ON CAM
LOCK MUST FACE HOLE IN PANEL EDGE.
DO NOT INSERT DOWELS
IN CAM SCREW / LOCK HOLES.
2
++
++
Assembly
Instruction
865283 LOFT CHEST
6 of 14 P5--MK 43

DESCRIPTION:
ASSEMBLY INSTRUCTION FOR DRAWER SLIDE A&B
SPECIAL TIPS FOR DRAWER SLIDE A
SPECIAL TIPS FOR DRAWER SLIDE B
FRONT
FRONT
FRONT
FRONT
SECOND HOLE
SECOND HOLE
THIRD HOLE
LAST THIRD HOLE
TENTH HOLE
BACK
BACK
BACK
BACK
350mm
3,5x13mm 6x11 mm 6x11mm
3x13mm
3x13mm
SIXTH HOLE
6x11 mm
Assembly
Instruction
ATTENTION !
Make sure second hole of drawer slide A
is put on first front hole of panel.
Step 1
865283 LOFT CHEST
7 of 14 P5--MK 43

DESCRIPTION:
++
++
3
3x
9x F
E
3x Left
D
LEFT
E
E
D
front
F
1
1
++
++
2
2
++
++
++
++
2x 2x
B
2x
C
E
C
Assembly
Instruction
B
A
++
865283 LOFT CHEST
7x
A
A
++
4x
B
front
2
1
A
B
++
A
A
1
2
8 of 14 P5--MK 43

DESCRIPTION:
RIGHT
++
++
4
6
front
D
F
E
E
E
++
Assembly
Instruction
C
865283 LOFT CHEST
3x
9x F
E
3x Right
D
++
2x 2x
B
B
2x
C
C
A
A
3
44x
C
9 of 14 P5--MK 43

6
++
++
++
++
DESCRIPTION:
++
++
++
++
1/2 TURN
CLOCKWISE.
10x
G
3
1
4
++
++
++
++
G
5
Assembly
Instruction
865283 LOFT CHEST
5
5
6
10 of 14 P5--MK 43
colour