
1
Assembly instructions
BEFORE YOU START
Warnings
●We suggest you retain these instructions for future reference
●Keep fittings out of children’s reach and keep children well
away from construction area.
●This product should only be used on firm, level ground .
●Please periodically check all fittings and re-tighten as
necessary .
●Please do not jump or stand on your bed.
●Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause cracking of the wood and
deterioration of the colour .
●Keep away from strong heat sources.
●Do not use this item if components are missing or broken.
●Keep fingers away from moving parts to avoid any possible
injury.
Do's
Don'ts
e
Number of people required to assemble
Two persons are required to assemble this item.
Time to assemble
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
andthey will be happy to arrange for a replacementto be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
30 min. TO NO TIME
To View our full furniture range please visit www.next.co.uk
Produced in China for Next Retail Ltd.
2019-V1
Harper BED
●We suggest you spenda short time reading through this
leaflet before you start .
●When you are ready to start,make sure that you have the
right tools andplenty of space .
●Due to the size of the product we recommendthat it is
assembledin the room intendedfor use.
●Unwrapall packaging materials andplace the components
on a clean surface to protect it from damage,We
recommendthat the packaging is usedto protect the
surfaces during assembly .
●Carefully checkthat you have all the parts before beginning
assembly .
●Ensure the product is fully assembledas illustratedandall
fixings fully tightenedbefore use.
●Checkfixings regularly to ensure they remain tight .
●When adjusting the support legs,ensure that the foot is set
5mm from the floor surface without the mattress in place.
When in use the legs will create the requiredsupport.
●Always ensure that protectors are usedon the legs according
to your flooring type.
●Ensure that the bedis assembledas per the instructions,all
fittings are tightenedandslats are secure before placing your
mattress.
●To clean your items,please lightly wipe with a slightly
dampenedcloth.
●For leather items dust regularly with a soft cloth,preferably
once a week, to keepthe leather pores free from dust particles.
●For velvet items use a soft brush lightly dress the fabric.
Lightly wipe with a slightly dampenedcloth to clean.
●For velvet items avoidscratching the fabric as the pile may
not recover andpermanently markit.
●Do not drag your assembledbed. Always lift the bedand
checkthat the centre support rail is securely fixedin place.
●Do not apply Adhesive substrates for example,
sticky tape to the product
●Do not use silicone basedfurniture polish.Silicone in
furniture polishes can break down the lacquer finish
●Never allowany kindof liquidto remain on your furniture.
Absorption can cause finishes to de-laminate andor stain
●Please do not jumpor standon your bed