Next LACEY T10233 User manual

H60xW45xD40cm
1
T10233
T10233-2022-V1
LACEY NATURAL BEDSIDE

ProducedinChinaforNextRetailLtd.
2
Assemblyinstructions
T10233
T10233-2022-V1
For self-assembled products, please periodically check all
fittings and re-tighten as necessary.
Place heavy items on the glass surface.
IMPORTANT INFORMATION
This product contains Safety glass (also known as Toughened
glass).If broken, it is designed to break safely and shatter into
many small pieces rather than large shards.
However, please note that the edges of these pieces can still
be sharp, so care is needed when handling them.
Safety glass is stronger than regular glass to better withstand
the wear and tear of everyday use, but some basic precautions
need to be taken to prolong its life:
DO:
Always use a coaster or table mat to protect the glass from very
hot or cold cups, glasses or plates etc.
Take care when placing items on the glass surface so as not to
damage it.
Take particular care not to damage the edge of the glass surface
- this type of damage can cause the whole panel to shatter.
If you notice damage on the edge of the glass, contact a local
glazier for advice.
DO NOT:
Position the unit near direct heat (e.g. in front of a radiator or
other strong heat source) as this can cause internal stress in
the glass and cause it to shatter.
Use it as a chopping board.
Strike the glass with hard or pointed objects.
CARE INSTRUCTIONS:
To clean the glass, use a proprietary glass cleaner and a soft
cloth. Do not use abrasive cleaners as they can damage the
finish of the glass.
If the glass will be in direct sunlight, ensure that drops of liquid etc are
removed as they can focus the sun's light and cause damage to your
furnishings.
Sunlight reflecting from the glass surface can reflect onto other surfaces
in your home, so if you have items likely to be affected by this,
please ensure you position them accordingly,
or shade the sunlight as required.
LACEY NATURAL BEDSIDE

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
1
2
1
1
2
40x30x45.6cm
3
4
9.35x8.26x20.5cm

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
4
B
1
12
65X25MM
6X15MM
0
1
10 20 30 40 50 60 70 80 90 100
mm
A

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
7
1
1
2

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
8
2
Ax1
65X25MM 6X15MM
Bx12
B
A
100%tighten

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
9
1
3
If your floor is not level, the feet on the unit should be adjusted to prevent it from rocking.
Place the unit in its final position and unscrew any feet that are not in full contact with the floor.
The unit should then be checked for level in left-right and front-back directions with a spirit level and further
adjustments made as required.
NOTE: If the unit is not levelled, the drawers may not function correctly.

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
4
10
To remove drawers:
2
13

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
5
11
To replace drawers:
123
4
5
6

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
12
6
Once the item is in its final position,correct
the fit of the drawers by sliding the adjusters
under the drawer box:
Press down the slider,moving it outward
will raise that side of the drawer,
and moving it inward will lower it.
2
1

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
7
13
WALL
STRAP
SCREW

T10233
LACEY NATURAL BEDSIDE
T10233-2022-V1
328mm
338mm
106mm
H60xW45xD40cm