Next Shropshire 121763 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• We recommend that the packaging is used to protect the surfaces during assembly.
• For general cleaning, periodically dust with a soft cloth.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Do not put hot dishes directly on the surfaces of the item.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Do not rub or scrub the surface when cleaning.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Made from solid oak with lacquer finish.
• The Shropshire range is manufactured in China from a carefully selected grade of oak that contains many naturally
occurring variations such as knots and prominent grain to give a natural look.
• Oak wood and veneers often have random pale markings in the grain, these are called medullary rays which are a
natural, unique and desirable feature of the wood.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions
.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Carefully check that you have all parts before beginning assembly.
• A minimum of 2 persons is required to assemble this product.
CARE INSTRUCTIONS
• These characteristics produced by nature,enhance the look of the furniture and make each piece unique and
individual.
PRODUCT INFORMATION
• To prevent dead knots from falling out over time these are removed and filled by hand to maintain the look.
• As knots are natural the size and quantity per item will vary, this reinforces the individuality of each piece making
each item unique.
121763 Shropshire Extending Table
Page 1 of 4

Insert dowel E x 1 to Middle leg (3) x 2.
Attach Middle leg (3) x 2 to Cross leg (2) x 2 using bolt
(B)x1 flat washer (D)x1 and spring washer (C)x1.
Tighten with alien key (A) provided. Please do not
over tighten.
PARTS
STEP TWO
STEP ONE
1pc 2pcs 2pcs 2pcs 4pcs
FITTINGS
Table Top Cross Leg Middle Leg Leaf Leaf Bar
1x1 2x2 3x2 4x2 5x4
Page 2 of 4

Attach assembled legs x 2 to the table top (1) as
shown in diagram using bolt (B)x6 flat washer (D)x6
and spring washer (C)x6.
Tighten with alien key (A) provided. Please check that
all bolts are tighten enough.
Attach Leaf bar (5)x4 to extension Leaf (4)x2 with bolt
(F)x8 flat washer (D)x8 and spring washer (C)x8.
Tighten with alien key (A) provided. Please leave bolts
loose, that to adjust bars after assembling with the
table top.
STEP FOUR
STEP THREE
Page 3 of 4

Attach extension Leaf (x2) to the table as shown in
diagram.
Lock catch as shown in diagram. Alight leaf bars and
tighten them with bolt G. Please do not over tighten
.
Assembly is now complete
.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP SEVEN
STEP FIVE
STEP SIX
Page 4 of 4