Next MODE 856959 User manual

Tools Needed
Helpline
If you have any problems with this product or require any
replacement fittings please contact Customer Services
Tel: [phone]
ASSEMBLY INSTRUCTIONS
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to
be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• Carefully check that you have all parts before beginning assembly.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY
856959 MODE CORNER DESK
• Carefully check that you have all parts before beginning assembly.
• Do not use furniture polish.
• Do not put hot dishes directly on the surfaces of the item.
• Do not rub or scrub the surface when cleaning.
PRODUCT INFORMATION
• For general cleaning, periodically dust with a soft cloth.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Keep fittings out of children's reach and keep children well away from the construction area.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• We recommend that the packaging is used to protect the surfaces during assembly.
• Made from MDF,hollow board & Honeycomb board ,partical board with a wood effect finish.
• Made in China.
CARE INSTRUCTIONS
• A minimum of two persons is required to assemble this product.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
Page 1 of 4

PARTS
FITTINGS
1. Insert 10 x cambolts (E) into panels 1, 4 & 5 and
tighten with a screwdriver.
2. Insert 3 x cambolts (F) into panel 1 and tighten with a
srewdriver
3. Insert 2 x bolts (I) into nuts fixed on panel 1 and turn
bolts (I) clockwise until tight by hands.
STEP ONE
Page 2 of 4

1. Attach panel 5 to panel 6 with 3 x screws (G) using an
Allen key (H) to tighten.
1. Glue and insert 2 x wooden dowels (B) into panel 5.
2. Attach panels 7 & 8 to panel 5 .
3. Insert 4 x camlocks (D) into panels 7 & 8 and tighten
with a screwdriver..
Ensure the arrow indicators are pointing towards the
panel edges before tightening with a screwdriver.
STEP THREE
STEP TWO
Note: panel 7 with finish edge
4. Tighten panels 7 & 8 to panel 6 with 4 x screws (G)
using an Allen key (H) to tighten.
1. Glue and insert 2 x wooden dowel (A) into panel 4.
2. Attach panel 3 to panels 4.
3. Insert 2 x camlock (D) into panel 3 and tighten with a
screwdriver.
Ensure the arrow indicators are pointing towards the
panel edges before tightening with a screwdriver.
STEP FOUR
Page 3 of 4

1. Glue and insert 2 x wooden dowel (A) into panel 1.
2. Attach panels 3 & 4 to panel 1.
3. Insert 3 x camlocks (D) into panels 3 & 4 and tighten
with a screwdriver.
4. Glue and insert 5 x wooden dowel (B) into panel 1.
5. Attach panels 5 & 6 to panel 1.
6. Insert 4 x camlocks (D) into panels 5 & 6 and tighten
with a screwdriver.
Ensure the arrow indicators are pointing towards the
panel edges before tightening with a screwdriver.
7. Attach panel 2 to panel 1.
8. Cover 2 x metal pieces (J) onto 2 x bolts (I) and thread
2 x springs (L) onto bolts (K) then screw 2 x metal nuts
(K) with spanner (M) to tighten.
1. Carefully lift the unit upright. The unit should be lifted
by two people.
2. Use 5x stickers (O) to cover the camlock holes on
STEP SIX
STEP FIVE
2. Use 5x stickers (O) to cover the camlock holes on
panel 5
3. Use 2 x stickers (N) to cover the holes on panel 2.
4. If you want to link 'Mode corner shelf '(sold
separately) and "Mode Corner desk" , Use the brackets
(P) and screws Q (x2) provided to attached the two item
together as shown in diagram.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 4 of 4