Next SOPHIE 876515 User manual

Tools Needed
Helpline
If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: [phone]
• Wall fixings are not included.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY
.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Carefully check that you have all parts before beginning assembly.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We recommend the use of the wall attachment bracket/strap provided for safety reasons.
• Not suitable for use in bathrooms.
CARE INSTRUCTIONS
• Made from MDF with a painted finish.
• Made in China.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
PRODUCT INFORMATION
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration
or warping.
• Do not put hot dishes directly on the surfaces of the item.
• For general cleaning, periodically dust with a soft cloth.
876515 SOPHIE BOOKCASE
Page1of5

1. Insert 2 x wooden dowels (J) into top panel 1.
2. Attach top front rail 7 to top panel 1 with 2 x
screws
(
F
)
and ti
g
hten with a screwdriver.
1. Insert 2 x wooden dowels (J) into bottom
frame 5.
2. Attach lower front rail 8 to bottom frame 5
with 2 x screwa
(
F
)
and ti
g
hten.
1. Insert 6 x cambolts (A) into side panel 2-R.
2. Attach 3 x shelf panels 6 to side panel 2-R.
3. Insert 6 x camlocks (B) into 3 x shelf panels 6.
Ensure the arrow indicator is pointing towards
the panel edge before tightening with a
screwdriver.
PARTS
STEP ONE
FITTINGS
STEP THREE
STEP TWO
Page2of5

1. Insert 6 x cambolts (A) into side panel 2-L.
2. Attach side panel 2-L to the assembled unit.
3. Insert 6 x camlocks (B) into 3 x shelf panels 6.
Ensure the arrow indicator is pointing towards
the panel edge before tightening with a
screwdriver.
1. Insert 4 x wooden dowels (C) to side panels 2
(both L&R).
2. Attach bottom frame 5 to the assembled unit
with 4 x screws (E) and tighten with a
screwdriver.
1. Insert 4 x cambolts (A) and 4 x wooden
dowels (C) into top panel 1.
2. Attach top panel 1 to the assembled unit.
3. Insert 4 x camlocks (B) into side panels 2
(both L&R). Ensure the arrow indicator is
pointing towards the panel edge before
tightening with a screwdriver.
STEP SIX
STEP FOUR
STEP FIVE
Page3of5

1.Attach back panel 3, 2 x back panel 4 and back
panel 13 to the assembled unit with 30 x screws
(D) and tighten.
1. Insert 4 x cambolts (A) into drawer front panel
9.
2. Attach drawer side panels 11 (both L&R) to
drawer front panel 9.
3. Insert 4 x camlocks (B) into drawer side
panels 11 (both L&R). Ensure the arrow indicator
is pointing towards the panel edge before
tightening with a screwdriver.
4. Insert drawer bottom panel 12 into the
grooves of drawer side panels 11 (both L&R).
5. Attach 1 x handle (H) to drawer front panel 9
with 1 x bolts (G) and tighten.
6. Attach drawer back panel 10 to the assembled
with 4 x screws (F) and tighten.
STEP SEVEN
STEP EIGHT
Page4of5

1. Insert the drawer into the unit on the pre-fitted
runners.
1.Use screw (C) and washer (B) to secure the
nylon strap (A) to the top panel
.
2.Secure the other end of the strap to the wall
with an appropriate screw and wall plug for your
wall type. To hide the strap behind the unit, drill
the holes lower than the top of unit.
Warning : Always ensure the area to be drilled is
free from hidden electrical wires, water and gas
pipes.
NB: Wall fixings are not included-please source
suitable fixings for your wall type. If in doubt
please consult a qualified trades person.
STEP NINE
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP TEN
Page5of5