Next 427044 User manual

Produced in China for Next Retail Ltd.
Version 1
1
PRIMROSE BED (SMALL DOUBLE)
427044
Assembly instructions
Actual product size
H106/88 x W127 x D197cm
IMPORTANT - RETAIN FOR FUTURE REFERENCE

Produced in China for Next Retail Ltd.
Version 1
2
PRIMROSE BED (SMALL DOUBLE)
427044
Assembly instructions
BEFORE YOU START
Number of people required
We recommend two persons to assemble this product.
Time to assemble
Tools required
Missing parts
If you are missing any fixtures and fittings for your product please
contact our customer service team on 0333 777 8999 and they will
be happy to arrange for a replacement to be sent to you free of
charge.
Home service technicians
If you have a fault with your product please contact our customer
service team on 0333 777 8999. If you have had the product for 28
days or less you may be offered a replacement, refund or for a fully
trained home service technician to visit your home to assess the
fault and repair the product where possible. If you have had the
product for more than 28 days we will send an independent home
service technician to review and repair the product where possible
and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To view our full furniture range please visit www.next.co.uk
Warnings
Important: Retain these instructions for future reference.
Unwrap all packaging materials and place the components on top of
the carton box or on a clean floor to prevent it from scratching
This product should only be used on firm level ground
Do not jump or stand on your bed
Keep small parts out of reach of children
Please periodically check all fittings and re-tighten as necessary
Avoid exposing the furniture to excessive heat or direct sunlight as
this can cause cracking of the wood and deterioration of the colour
Do’s
We suggest you spend a short time reading through this leaflet
before you start
When you are ready to start, make sure that you have the right tools,
plenty of space and a clean, dry area for assembly
Due to the size of the product, we recommend that it is assembled in
the room intended for use
We recommend that the packaging is used to protect the surfaces
during assembly
Carefully check that you have all the parts before beginning
assembly
Ensure the product is fully assembled as illustrated and all fixings
fully tightened before use. Check fixings regularly to ensure they
remain tight
When moving your assembled bed, it is best to lift the bed and
never to drag it. Please check that the centre support rail is
securely fixed in place
When adjusting the support legs ensure that the foot is set
5-10mm from the floor surface without the mattress in place.
When in use the legs will create the required support for the
product
Don’t’s
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or finishes to de-laminate
To clean your item, please use a soft cloth slightly dampened with
water and wipe clean. Then buff with a dry clean cloth

Produced in China for Next Retail Ltd.
Version 1
3
PRIMROSE BED (SMALL DOUBLE)
427044
Assembly instructions
GETTING TO KNOW YOUR PRODUCT

Produced in China for Next Retail Ltd.
Version 1
4
PRIMROSE BED (SMALL DOUBLE)
427044
Assembly instructions
Components supplied - Use this guide if you require a replacement part.
Fixtures and fittings Fixtures and fittings
supplied (actual size) supplied (not to scale)

Produced in China for Next Retail Ltd.
Version 1
5
PRIMROSE BED (SMALL DOUBLE)
427044
Assembly instructions
1
2

Produced in China for Next Retail Ltd.
Version 1
6
PRIMROSE BED (SMALL DOUBLE)
427044
Assembly instructions
0
3
4

Produced in China for Next Retail Ltd.
Version 1
7
PRIMROSE BED (SMALL DOUBLE)
427044
Assembly instructions
5
6
IMPORTANT
Once the feet have been assembled and attached, they should be adjusted to ensure they do not touch the floor,
(5mm above the floor) to allow for movement once the mattress is placed on the bed frame.
It is important to note that when moving the bed that it is not dragged into its new position to prevent the possibility of
these feet being twisted or angled to one side, which could lead to the collapse of the centre of the bed.
To move the bed, remove the mattress and lift the bed into its new position to avoid damage. Ensure the feet are at
90˚ to the floor before replacing the mattress.