Next Westcott User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose fixtures and fittings straight
into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

W190cm X L241cm X H101cm
Actual product size
Assembly instructions
Need Help?
With: Assembly Instructions
Missing or damaged parts
CALL: 0333 777 8999
IMPORTANT - RETAIN FOR FUTURE REFERENCE
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659
Fabric content
500177-100%polyester
619318-100%polyester
928659-100%polyester

2
Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659
Warnings
Don'ts
Do's
We suggest you spend a short time reading through this leaflet
BEFORE YOU START
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
If you are missing any fixtures and fittings for your product
surfaces during assembly.
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
Carefully check that you have all the parts before beginning
to you free of charge.
assembly.
Home service technicians
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly If you have a fault with your product please contact our
to ensure they remain tight. customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
When moving your assembled bed. It is best to lift the bed refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
rail is securely fixed in place. If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
When adjusting the support legs ensure that the foot is set the product where possible and recommend further action.
10mm from the floor surface without the mattress in place.
When in use the legs will create the required support for You can write to us at
the product.
Next Retail Ltd,
Never allow any kind of liquid to remain on your furniture. Desford Road,
Absorption can cause materials to warp or finishes to
Leicester,
de-laminate. LE19 4AT,
To clean your item, please use a vacuum or lightly brush clean. To view our full furniture range please visit www.next.co.uk
and never to drag it. Please check that the centre support
Home Customer Services
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
Please do not stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
necessary.
Please periodically check all fittings and re-tighten as
This product should only by used on firm ,level ground.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not drag or pull your furniture.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaners.
Number of people required to assemble
Missing parts
TO NO TIME
30min

Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659

Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659

Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659

Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659

Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659

Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659
stick the felt pads on the side rails as above drawing

Assembly instructions
WESTCOTT HIGH FOOTEND FLIP BED SUPERKING
500177/619318/928659