Next HAVANA 791549 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
CARE INSTRUCTIONS
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 3 persons is required to assemble this product.
• For general cleaning, periodically dust with a soft cloth.
PRODUCT INFORMATION
• Made from particleboard,MDF with a wood effect finish.
• Made in Indonesia.
• Do not rub or scrub the surface when cleaning.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching
• Do not put hot dishes directly on the surfaces of the item.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
or damage.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Ensure the mats and coasters used do not have an abrasive surface underneath.
791549 HAVANA BOOKCASE
GLUE
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
1
7R
8
8
7L
1
1 of 8

15x12 mm. 7.5X32 mm. 8x32 mm. P6x19 mm. F4x19 mm. P6x19 mm. 4mm. F10x50 mm
Ax28 Bx28 Cx38 Dx2 Ex18 Fx6 Gx2 Hx10
6x40 mm. 150 mm.
.
Ix18 Jx2 Kx1
STEP ONE
1x1 2x1 3x2 4X1 5X4 6X1
PARTS
7LX1 7RX1 8X1
FITTINGS
GLUE
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
1
7R
8
8
7L
1
2 of 8

2. Insert 4x cambolts (B) into the holes of panels 3(x2).
1. Insert 6 x cambolts (B) into the holes of panel 1 and
tighten with a screwdriver.
1. Insert 4x camlocks (A) into the holes of panel 4, ensure
that arrow indicator is pointing towards the panel edge
before tightening with a screwdriver.
2. Insert 2x cambolts (B) into the holes of panel 4 and
tighten with a screwdriver.
3. Glue and Insert 4x wooden dowels (C) into the end of
panel 4.
1. Insert 8x camlocks (A) into the holes of panels 3(x2),
ensure that arrow indicator is pointing towards the panel
edge before tightening with a screwdriver.
STEP TWO
1. Insert 4x camlocks (A) into the holes of panel 2 and
ensure that arrow indicator is pointing towards the panel
edge before tightening with a screwdriver.
2. Glue and Insert 4x wooden dowels (C) into the end of
panel 2.
STEP FOUR
STEP THREE
3. Glue and Insert 8x wooden dowels (C) into the end of
panels 3(x2).
GLUE
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
1
7R
8
8
7L
1
3 of 8

2. Insert 8x cambolts (B) into the holes of panel 7L.
2. Insert 8x cambolts (B) into the holes of panel 7R.
1. Glue 2x wooden dowels (C) on panel 5.
STEP SEVEN
1. Insert 2x camlocks (A) into the holes of panel 7R, ensure
that arrow indicator is pointing towards the panel edge
before tightening with a screwdriver.
STEP FIVE
1. Insert 8x camlocks (A) into the holes of panels 5 (x4),
ensure that arrow indicator is pointing towards the panel
edge before tightening with a screwdriver.
2. Glue and Insert 18 x wooden dowels (C) into the end of
panels 5 (x4) and 6.
1. Insert 2x camlocks (A) into the holes of panel 7L, ensure
that arrow indicator is pointing towards the panel edge
before tightening with a screwdriver.
3. Glue and Insert 2x wooden dowels (C) into the end of
panel 7L.
3. Glue and Insert 2x wooden dowels (C) into the end of
panel 7R.
2. Attach panel 5 to panel 6 by using 2x screws (H),turn
clockwise with a cross-head screwdriver until tight.
STEP SIX
STEP EIGHT
GLUE
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
1
7R
8
8
7L
1
4 of 8

1. Glue 4x wooden dowels (C) on panel 5.
STEP ELEVEN
1. Glue 4x wooden dowels (C) into the end of panel 5.
2. Attach panel 5 to panel 3 and tighten camlocks with a
screwdriver to secure the panel together.
2. Attach panel 5 to panel to the assembled unit and tighten camlocks with a screwdriver to secure the panel together.
3. Attach panel 2 to the to the assembled by using 2x screws (H),turn clockwise with a cross-head screwdriver until
tight.
3. Attach panel 3 to panel 5 by using 2x screws (H),turn clockwise with a cross-head screwdriver until tight.
1. Glue 4x wooden dowels (C) into the end of panel 5.
STEP NINE
3. Attach panel 4 to the panel 5 by using 2x screws (H),turn
clockwise with a cross-head screwdriver until tight.
STEP TEN
2. Attach panel 5 to panel 4 and tighten camlocks with a screwdriver to secure the panel together.
GLUE
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
1
7R
8
8
7L
1
5 of 8

1. Glue 2x wooden dowels (C) on panel 6.
1. Glue 16x wooden dowels (C) on panels 2, 3 (x2) and 4.
3.Attach panel 7R to the assembled unit and tighten
camlocks with a screwdriver to secure all panels together.
1. Insert panel 8 into the recessed grooves of panels 7L ,7R and 2.And ensure the tape is facing forward to back side
of the item.
2. Attach panel 6 to panel 2 by using 2x screws (H),turn clockwise with a cross-head screwdriver until tight.
STEP THIRTHTEEN
STEP TWELVE
STEP FOURTEEN
2. Attach the fixed shelves assembled unit to panel 7L and
tighten camlocks with a screwdriver to secure all panels
together.
GLUE
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
7L
7R
7R
1
7R
8
8
7L
1
6 of 8

1. Turn the unit upright. This should be lifted by 2 persons.
2. Glue 6x wooden dowels (C) on panels 7L, 7R and 5.
1.Secure the backboard by tighten 6 x screws(F) with a
screwdriver.
2. Attach 18x backboard fasteners (I) to the backboard
grooves of unit and secure by using 18x screws (E),turn
clockwise with a cross-head screwdriver until tight.
STEP SEVENTEEN
3. Attach panel 1 to the assembled unit and tighten
camlocks with a screwdriver to secure all panels together.
STEP FIFTEEN
1. Attach 2x straps (J) to the predrilled holes of panel 1,
using 2x washers (G) and 2x screws (D),turn clockwise with
a screwdriver until tight.
STEP SIXTEEN
GLUE
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
1
7R
8
8
7L
1
G
7 of 8

FOIL STICKERS
HOW TO USE THE FOIL STICKER.
STEP EIGHTEEN
1. Fix the other ends of the strap to the wall using
appropriate screw, washer and wall plug for your wall type.
Use the foil stickers to cover all visible camlock holes from construction. Ensure when placing the sticker
the grain of sticker follows the direction of the grain of the panel. This will give a better visual appearance.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
NOTE: Wall fixing are not included. Please source suitable
fixings for your wall type. If it doubt please consult a
qualified trade person.
WARNING: Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
Dia. 20 mm.
L x 28
GLUE
Incorrect
Correct
2
3
3
5
5
4
53
54
5
54
5
3
3
3
5
2
5
53
4
3
5
5
1
5
6
4
5
3
6
55
5
3
253
4
8
7L
8
7L
8
8
7R
1
7R
7L
5
2
2
5
7R
3
7L
3
4
7L
7L
7R
7L
8
7L
8
8
7R
1
7R
8
8
7L
1
8 of 8