NEXTIVITY Cel-Fi GO O Building User manual

For more information, visit: www.powertec.com.au
Cel-Fi GO O Building
Quick Start Guide
Cel-Fi GO for Building is an evolved
Mobile Signal Repeater design that can
amplify mobile signals up to 100dB.
Connect a single Outdoor Antenna to
receive the mobile-network signals, and
then a single Indoor Antenna where you
need service, and Cel-Fi GO will do the rest
automatically.
IN THE BOX
• Quick Start Guide • Smart Signal Repeater
• Power Supply • Legal Insert
Copyright © 2018 by Nextivity, Inc, U.S. Patents pending. All rights reserved.
The Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All
other trademarks or registered trademarks listed belong to their respective
owners. Designed by Nextivity Inc in California. qsg_go-stationary-powertec_18-1026
NETWORK STRENGTH
The Cel-Fi WAVE app can help you
optimize your system’s performance.
Cel-Fi GO O Building Smart Signal Repeater
6Tips & Tricks
7Installation Process
• Keep Outdoor and Indoor
antennas separated/isolated
from each other for best
performance
• Do not use cable splitters for
antennas
• Follow the installation
instructions for your chosen
antennas
• Use sealant if any connections
are exposed to elements
For more Cel-Fi GO features, go to App Store or Google
play and download the mobile Cel-Fi WAVE app.
(NOTE: If you do not have a compatible smartphone, go
to cel-.com/wave to download the Desktop app.)
Smart Signal Repeater
Contact:
Powertec Telecommunications
07 5577 0500
[e-mail]
www.powertec.com.au

Cel-Fi GO O Building Smart Signal Repeater www.powertec.com.au
Install Indoor Antenna
Install Outdoor Antenna
I
Find the location with the best
signal.
Install Outdoor Antenna
where the mobile device
receives this signal.
2
SAFETY: DO NOT INSTALL any equipment close
to power lines or drill into walls or other structural
elements without rst ensuring the location is
safe and that there are no hidden items that could
cause injury.
INDOOR ANTENNA
NOT INCLUDED
OUTDOOR
ANTENNA
OUTDOOR ANTENNA NOT INCLUDED
Install Indoor Antenna where coverage is needed.
Press the MODE button on the unit to select desired
scanning mode. Status Indicator will blink during the
setup process, and may take a few minutes to complete.
(OPTIONAL: use your smartphone to select mode.
Download the Cel-Fi WAVE app, and follow the on-screen
instructions.)
5Plug in Cel-Fi GO & Select Mode
NETWORK STRENGTH
4Connect Outdoor & Indoor Antennas
to the Cel-Fi GO Unit
LEFT SIDE: Indoor Antenna Connector
TOP VIEW
RIGHT SIDE: Outdoor Antenna Connector
STATUS
INDICATOR
MODE
DO NOT
plug in at this time.
3Mount Cel-Fi GO Near Power Outlet
Find a power outlet. Mount Cel-Fi GO
near the power outlet.
Cel-Fi GO Stationary Installation
(*NOTE: if Error, go to troubleshooting at cel-.com/support)
AUTO
3G
4G LTE
MODE
SELECT
BUTTON
MODE
STATUS
INDICATOR
AUTO
3G
4G/4GX
MODE
SELECT
BUTTON
MODE
STATUS
INDICATOR
4G LTE
4G/4GX
STATUS INDICATOR
LEGEND
Boosting 3G
Boosting 4G LTE
Error*
STATUS INDICATOR
LEGEND
Boosting 3G
Boosting 4G/4GX
Error*