Nightingale LXO 6000 Series Instruction Manual

User Handbook
LXO
6000 Series
nightingalechairs.com

Congratulations,
this LXO™ is yours.
Please read and understand this user handbook
before operating this office chair.
A
B
C
F
D
E
6002
6000 6000-DS
6000-07

Using & Adjusting Your LXO™
Pneumatic Height Adjustment
To lower, lift the lever up while seated.
To raise, lift the same lever up without
seated weight.
Tension Control Knob
Turn knob clockwise to increase tension,
turn counter-clockwise to decrease tension.
Arm Height Adjustment
With polyurethane arm pads for comfort. Push
button to raise or lower arm, release to lock.
Adjustable Foot Ring (Optional)
To loosen, turn wheel counter-clockwise
and move ring to desired height. Turn wheel
clockwise to tighten. (Not applicable on the
6000-DS model)
Synchro-Tilt Mechanism & Tilt Lock
To lock in position, gently push lever towards
back. To unlock, gently pull the same
lever forward.
Seat Depth Adjustment Knob
Loose knob (do not separate) and slide into
desired position. Retighted the knob to
secure position.
PUSH
A
C D
B
E F

Care Instructions
With regular care and maintenance, your LXO™
will provide many years of superior performance
and satisfaction. To maintain the quality of your
Nightingale product, please follow the cleaning
instructions outlined here.
Nightingale Corp.
T 1.800.363.8954
F 1.800.637.6784
www.nightingalechairs.com
[email protected]
2
RECYCLABLE
for more information, please visit
www.nightingalechairs.com
Mechanism
Once a year, lubricate using light sewing machine oil or similar product. (Spray
with plastic straw attached to sprayer). NOTE: To prevent dripping, avoid over
lubrication which may cause damage to surrounding surfaces.
ABLEX™ Mesh
Clean with mild detergent and water applied with a clean damp cloth or sponge.
Rinse with a damp (water) cloth and let dry. Never use hot water and avoid
scrubbing. Use gentle movements.
Plastic Parts
To clean, spray with a mild detergent and wipe off using a damp (water) cloth.
Do not use abrasives or excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp cloth and any mild
detergent.
*The instruction for the care and maintenance of Nightingale Products are provided to you as a sevice. No
warranty is implied since results may vary.