Nightingale LXO 6000 User manual

TM
MODEL 6000
SHOWN
SCAN this QR Code To Learn
More About How To Use
This LXO Chair.
How To Care For Your LXO™
With regular care and maintenance, your LXO™ will provide many years
of superior performance and satisfaction. To maintain the quality of your
Nightingale product, please follow the cleaning procedures outlined
here.
Mechanism
Oil sparingly moving parts once a year with light machine oil.
NOTE: to prevent dripping, avoid over lubrication which may
cause damage to surrounding surfaces.
ABLEX™ Mesh
Clean with mild detergent and water applied with a damp clean
cloth or sponge. Rinse with water. Never use hot water and
avoid scrubbing. Use gentle movements.
Plastic parts
Clean with mild detergent and water. Do not use abrasives or
excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp
cloth and any mild detergent.
* The instruction for the care and maintenance of Nightingale Products are
provided to you as a service. No warranty is implied since results may vary.
MANUFACTURING CONTRACT OFFICE CHAIRS SINCE 1928
User Guide Instructions
Nightingale Offi ce Chairs
Toll-Free Phone: [phone]
Fax: [phone]
Website: www.nightingalechairs.com
Email: [email protected]
82%
RECYCLABLE
MODEL 6000
SHOWN
LXO_6000_ITAG.indd 1 2015-06-16 12:25 PM

Congratulations On Purchasing
Nightingale’s LXO™
Please read and understand this user guide with
instructions before operating this ofce chair.

D. Synchro tilt mechanism with
three position tilt-lock. To lock
chair in position, push paddle
back, to allow free movement,
pull paddle forward.
C. Pneumatic Height Adjustment
To lower, lift the paddle while
seated. To raise, lift paddle with
your weight off seat.
FEATURE Translucent ABLEXTM
patterned weave mesh back
provides lumbar support while
allowing dynamic back
movement. It is also breathable.
FEATURE “Waterfall” seat design
that gently slopes away from the
legs minimizing pressure on the
thighs, promoting good posture.
FEATURE Energy absorbing dual
density ENERSORBTM seat foam
reduces sitting fatigue by
minimizing pressure points
and increasing blood circulation.
A. Arm Height Adjustment To
raise or lower arm height, push
button up and move to desired
position. Release button to
lock into position.

B. Seat Depth Adjustment Loosen
hand wheel (do not remove) and
slide back to desired position,
then re-tighten hand wheel.


E. Tension Knob Turn clock-
wise to increase tension,
turn counter-clockwise to
decrease tension.


D
A


B
(Found on the left side)
How To Use and Adjust My LXOTM

E

C
LXO_6000_ITAG.indd 2 2015-06-16 12:25 PM