Nightingale LEGACY 1600 Series Instruction Manual

User Handbook
LEGACY
1600 Series
nightingalechairs.com

Nightingale Corp.
T 1.800.363.8954
F 1.800.637.6784
www.nightingalechairs.com
[email protected]
User Guide Adjustments
PNEUMATIC HEIGHT
ADJUSTMENT
C
BTILT LOCK
A3D ARMS
To adjust arm height, pull
upwards on arm pad. Keep
pulling until desired height is
reached. To lower, pull arm pad
to maximum height to unlock arm
height and then lower to lowest
height to reset. To adjust arm
pivot, press button under arm pad
and turn pad inwards or
outwards to desired position.
Release to lock. To adjust arm
width, pull arm outwards from
bottom of arm.
To adjust tilt lock, pull lever up,
tilt chair to desired angle and
push lever down to lock.
To lower, pull the lever while
seated. To raise pull lever up
with all weight off the seat.
A
B
C

ESEAT SLIDE
Nightingale Corp.
T 1.800.363.8954
F 1.800.637.6784
www.nightingalechairs.com
[email protected]
GSELF-ADJUSTING BACK
FRATCHET BACK HEIGHT
E
D
DTENSION CONTROL
G
User Guide Adjustments
Built-in spring system,
self-adjusts to shape and size of
user’s back, causing lumber
support to automatically move
outwards to support lower
lumbar area of the user.
To adjust back height, pull back
up to desired height and release
to lock. To lower back height, pull
back up until it reaches the
maximum height and then allow
it to lower to lowest setting.
To adjust seat depth, pull lever
up to and with your weight off
seat, move seat to desired depth.
Release to lock position.
Turn knob clockwise to increase
tension, turn counter-clockwise to
decrease tension.
F