Nightingale CXO 6200 series Instruction Manual

SERIES 6200
User Handbook
TM
Nightingale

Congratulations,
this CXO™ is yours.
Please read and understand this user handbook
before operating this office chair.
A
E
F
G
H
B
C
D
6200
6200D-ti
6200D-HD
6200D
Ti & HD Arm
Press & hold button to adjust
height of arm rest as desired,
release to lock in place.

Using & Adjusting Your CXO™
Pneumatic Height Adjustment
To lower, tilt the lever up while seated.To raise,
tilt the same lever up with no weight on seat.
Multi-Position Tilt Lock
To lock in position, turn left-lever up.
To unlock, turn lever down. Gently lean into
back to activate the positive back lock release.
Arm Height & Width Adjustment
To raise or lower arm height, lift trigger and
slide into desired position.To adjust the width,
pull out to widen; push in to contract width.
Rachet Height Adjustable Headest
Simply lift or lower headrest to desired
position—locks automatically. Headrest can be
tilted to desired angle.
Original Style Headrest (Optional)
Simply lift headrest to desired position—locks
automatically. To unlock, lift to top position
and slide down.
Seat Slider
Lift middle-lever up to unlock, move seat to
desired position while seated and release
to lock.
Tension Knob
Turn front-knob clockwise to increase tension,
turn the same knob counter-clockwise to
decrease tension.
Pivot & Arm Pad Adjustment
To pivot, press/hold front-button to adjust
angle, and release to lock.To adjust slider,
press/hold back-button and slide to desired
front/back position, and release to lock.
PIVOT
SLIDE
HEIGHT
WIDTH
Lumbar Adjustment
To adjust depth of lumbar, push in to increase.
To release, press and hold the top reset button
and gently pull away from chair. To raise
lumbar position, lift lumbar to desired height
and release.To reset height, lift to top.
RESET
G H
F
CBA
ED

Care Instructions
Mechanism
Once a year, lubricate using light sewing machine oil or similar product. (Spray
with plastic straw attached to sprayer). NOTE: To prevent dripping, avoid over
lubrication which may cause damage to surrounding surfaces.
ABLEX™ Mesh
Clean with mild detergent and water applied with a clean damp cloth or sponge.
Rinse with a damp (water) cloth and let dry. Never use hot water and avoid
scrubbing. Use gentle movements.
Plastic Parts
To clean, spray with a mild detergent and wipe off using a damp (water) cloth.
Do not use abrasives or excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp cloth and any mild
detergent.
*The instruction for the care and maintenance of Nightingale Products are provided to you as a sevice. No
warranty is implied since results may vary.
With regular care and maintenance, your CXO™
will provide many years of superior performance
and satisfaction. To maintain the quality of your
Nightingale chair, please follow the cleaning
instructions outlined here.
Nightingale Corp.
T 1.800.363.8954
F 1.800.637.6784
www.nightingalechairs.com
[email protected]
2
RECYCLABLE
for more information, please visit
www.nightingalechairs.com