Nilfisk-Advance Liberty SC50 User manual

LOCATION TAG
Recording a new cleaning plan
1Place the yellow
key on machine
2Drive the machine
in front of the
Location tag
3Wait until you
see the screen
above and the
tag number
4Drive to a chosen
start point
5Press the
“RECORD” button
6Choose “CopyCat”
and press the
“RECORD” button
7Turn ON scrubbing by
pressing the button
8Adjust cleaning settings
9Create the CopyCat path:
10 Press the “STOP” button
11 Save the plan with the
“RECORD” button
9Adjust cleaning settings
10 Save the plan with the
“RECORD” button
6Choose “Fill-in”
and press the
“RECORD” button
7Drive around the Fill-in area:
8Press the “STOP” button
Start driving counter-clockwise
Start from wherever you see t
Continue driving after
the rst loop, and
allow the machine to
stop by itself
When nished,
stop wherever you
please
or
CopyCat Fill-in
For videos and additional help, scan the QR code
to access the Digital User Guides
Nilsk Liberty SC50

LOCATION TAG
© 2020 Nilsk, Inc. Form L4003N_ 0820 N112_0002_V2 EN-US 08/2020
Daily use – replaying a cleaning plan
1Place the yellow OR blue
key on the machine
2Drive the machine in front
of the Location tag
3Wait until you see the
screen above and the
tag number
4Drive to the start point of
an existing plan. The above
screen should appear.
1Top up fresh water through the ll
point on the side of the machine,
paying attention to the water level
2Fill the detergent tank 3Wipe all sensors with a clean
microber cloth
5Press the “PLAY” button
and remove the key
6Cleaning will begin, and
the machine will stop when
the job is nished
7When moving to a new
cleaning area with another
tag, press the button above
and select ”Scan new
location tag”
4Empty the dirty-water tank with a
hose, and gently rinse the tank
5Clean the squeegee, and replace its
pad if necessary
6Charge the machine for 8 -10 hours
Daily maintenance
For videos and additional help, scan the QR code
to access the Digital User Guides
Nilsk Liberty SC50