Nilfisk-ALTO MAXXI II User manual

Service Manual
Models:
35, 55-1, 55-2, 75-1, 75-2
MAXXI II
ENGLISH

2
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Preface 3
Safety Issues 4
Technical specifications 5
Construction 10
Top 10
Container 13
Parts 15
Models:
35 15
55-1, 75-117
55-2, 75-218
55, 75 BSF, BDF 19
Filter and Bags 20
Squeegee 20
Diagrams 21
Notes 22

3
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Preface
In this manual you will find the essentials you need to know when repairing the wet and
dry vacuum cleaners in the MAXXI II series. When carrying out repairs, make sure you
have a suitable workbench or the like with the necessary water and power supply
available.
 If you determine an error in operation, be sure to refer the customer to the user
manual.
A fault in the equipment can have a number of causes. The chapter ”service / repair”
will help you here. Use the illustrated spare parts lists for your repairs. These show you
the location of the individual parts and the sequence in which they are assembled.
 Always refer to the technical service bulletin information sheets. Also known as
TSB’s
These will tell you about any technical modifications made after publication of this
service manual.
 Only use original Nilfisk-ALTO spare parts
It is under no circumstances legal to provide this service manual and any technical
service bulletin that might be released to third party without a written approval from the
Global Product Management group, located at
Sognevej 25, 2605 Brøndby, Denmark

4
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Safety Issues
To be performed by a skilled or instructed person only !
Disconnect the vacuum cleaner from the power supply before
starting the work!
Safety instructions marked with this symbol in
this manual must be observed to prevent
danger to persons.
This symbol is used to mark safety
instructions that must be observed to prevent
damage to the equipment and degradation of
performance.
This symbol indicates tips and instructions to
simplify work and to ensure safe operation.

5
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Technical specifications
Technical specification for the MAXXI II EU variants

6
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Technical specifications
Technical specification for the MAXXI II UK variants

7
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Technical specifications
Technical specification for the MAXXI II AU / NZ variants

8
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Technical specifications
Technical specification for the MAXXI II US variants

9
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Technical specifications
Technical specification for the MAXXI II JP variants

10
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Construction
MAXXI II - Top 35
Art: 6.1 shows how the handle, top
cover and the switch is placed on top
of the motor cover.
Art: 6.1
Art: 6.3
Art: 6.3 shows how the motor is
fitted into the bottom part of the
motor head.
Art: 6.2
Art: 6.2 shows how the motor cover
is fitted into the bottom part of the
motor head. Please refer to the spare part list for
part numbers.

11
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Construction
MAXXI II - Top 55-1, 75-1
Art: 7.1 shows how the top cover
and the switch is placed on top of
the motor cover.
Art: 7.1
Art: 7.3
Art: 7.3 shows how the motor is
fitted into the bottom part of the
motor head.
Art: 7.2
Art: 7.2 shows how the motor cover
is fitted into the bottom part of the
motor head.
Please refer to the spare part list for
part numbers.

12
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Construction
MAXXI II - Top 55-2, 75-2
Art: 8.1 shows how the top cover
and the switches are placed on top
of the motor cover.
Art: 8.1
Art: 8.3
Art: 8.3 shows how the motors are
fitted into the bottom part of the
motor head.
Art: 8.2
Art: 8.2 shows how the motor cover
is fitted into the bottom part of the
motor head.
Please refer to the spare part list for
part numbers.

13
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Construction
MAXXI II - Container 35
Art: 9.1 shows how the 35 L container is fitted with front and back wheels
including the rear axel.
*Please note that the inlet will need to be damaged/cut
in order to change it.
Art: 9.1
Please refer to the spare part list for
part numbers.

14
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Construction
MAXXI II - Container 55-1, 55-2, 75-1, 75-2
Art: 10.1 shows how the drain hose,
drain lit, and the release is fitted to
the container.
*Please note that the Inlet will need
to be damaged/cut in order to
change it.
Art: 10.1
Art: 10.2
Art: 10.2 shows how the front- and
rear wheels, axel, and the handle is
fitted to the trolley.
Please refer to the spare part list for
part numbers.

15
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Parts
MAXXI II - Top 35

16
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Parts
MAXXI II - Container 35

17
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Parts
MAXXI II - Top 55-1, 75-1

18
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Parts
MAXXI II - Top 55-2, 75-2

19
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Parts
MAXXI II - Container 55, 75 BSF, BDF

20
MAXXI_II_Service_Manual_version_1.0_Feb_2013
Parts
MAXXI II - Filter and Bags
MAXXI II - Squeegee