Ninja Dragon Alpha Z PRO Instruction manual

Alpha Z PRO Quick Start Manual
1. Please fully charge the battery before start
2. Press the power on / off button on the drone to turn the power on
3. Turn on the controller by pressing the power on / off button in the middle
Indicator light will keep flashing, the drone is on a paring mode
4. Push the left hand joystick up , then push it down
5. You will hear a “beep” sound twice, it means controller paring is completed and the Indicator light
becomes solid

6. Please download the app from App Store or Google Play and install it
7. Turn on the wifi from your mobile phone and do a quick scan
8. Select “WIFI_FPV_XXX” and connect
9. Open the app and tap “START” on the top right hand corner

10. The following is the layout of the function keys on your screen and now you are ready to go!