Ninja BL488 Series User manual

OWNER’S GUIDE
BL488 Series
www.sharkninjamanuals.com 1-877-646-5288
®

2
®
www.sharkninjamanuals.com
Welcome to the Nutri Ninja
®
with Auto-iQ
®
Pro Complete all-purpose,
customisable, everyday kitchen assistant. The Nutri Ninja with Auto-iQ Pro
Complete features pre-programmed settings that take the guesswork out of drink
and meal making. These programs are timed to deliver consistent, delicious
results that finish on their own so all you have to do is press a button and enjoy.
Select accessories are included. Additional accessories are available for
purchase at www.sharkninjamanuals.com. For a list of what is included with
this model, refer to the top of the box or online.
If you should have a question about your Nutri Ninja with Auto-iQ Pro Complete, please
call the Ninja Customer service line at 1-877-646-5288.
THANK YOU!
REGISTER YOUR PURCHASE:
www.sharkninjamanuals.com
1-877-646-5288
RECORD THIS INFORMATION:
Model Number: ���������������������������������������������
Date of Purchase (Keep receipt):
����������������������������������������������������������
THIS BOOK COVERS MODEL NUMBER:
BL488 ***** 30
TECHNICAL SPECIFICATIONS:
Voltage: 220-240V~, 50/60Hz
Power: 1100W
Ninja®Jar Capacity: 1.4 L
Nutri Ninja® Cup Capacity: 300ml
500ml
650ml
900ml
Ninja
®
Double Wall Stainless
Steel Cup Capacity: 650ml
Grinder Capacity: 10 tbsp
This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE).
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To
return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take
this product for environmental safe recycling.
This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage
Directive (LVD) 2006/95/EC and its revisions.

1-877-646-5288 3
®
IMPORTANT SAFEGUARDS
FOR HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be
observed, including the following:
IMPORTANT: This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children shall not use or play with this appliance. Close supervision is necessary
to keep appliance and cord out of reach of children during use.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1 WARNING: Extension cords are not recommended for use with this product.
2 WARNING: Never leave the appliance unattended while in use.
3 CAUTION: Blade assembly is sharp, handle with care. When handling the
blade assembly, always hold by the top of the blade assembly.
4 CAUTION: Do not blend hot liquids. Allow liquids and foods to cool to
room temperature before blending.
5 CAUTION: Do not blend dry ingredients unless pulsing for short intervals
per the instructions. Continuous blending dry ingredients will overheat
the blender.
6 CAUTION: Never attempt to remove the container while the appliance is
still running.
7 IMPORTANT: Never add ingredients to the containers before inserting the
blade assembly first.
8 IMPORTANT: Do not attempt to operate the container without the lid on.
9 IMPORTANT: Never run the appliance empty.
10 IMPORTANT: Make sure that the motor base is plugged in for use.
11 IMPORTANT: Make sure that the motor base is unplugged when not in use.
12 To protect against electrical shock, do not submerge the appliance or allow the power
cord to come into contact with water or any other liquid.
13 DO NOT allow young children to operate the appliance or use as a toy. Close
supervision is necessary when any appliance is used by or near children.
14 Never leave the appliance unattended when in use.
15 Turn the appliance off and remove the power cord from the electrical outlet when not
in use, before assembling or disassembling parts, accessing parts that move while in
use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet.
Never pull from the power cord.
16 DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it
to disconnect from the electrical outlet; to unplug, grasp the plug, not the cord.
17 DO NOT use with damaged cord or plug.
18 DO NOT USE if the appliance is not working, after it has been dropped, dropped into
water, damaged or left outdoors.
19 NO SERVICEABLE PARTS. Incorrect re-assembly or repair can cause a risk of electrical
shock or injury to persons when the appliance is used.
20 DO NOT let the power cord hang over the edge of a table or counter or touch hot
surfaces such as the stove.
21 Always use the appliance on a dry, level surface. Make sure the suction-cup feet are
wiped clean and no crumbs or residue are on the bottom of them.
22 Keep hands, hair, clothing, and utensils out of container while processing to reduce
the risk of severe injury to persons or damage to the appliance. A scraper may be used
ONLY when the appliance is not running.
23 Avoid contact with moving parts.
24 DO NOT attempt to sharpen blade assemblies.
25 DO NOT use the appliance if the blade assembly is bent or damaged.
26 To reduce risk of injury, never place the blade assembly on the motor base without the
proper container.
27 DO NOT operate this appliance on or near any hot surfaces (such as on a gas or
electric burner or in a heated oven).
28 The use of attachments or accessories (including canning jars), that are not recommended
or sold by the manufacturer may cause fire, electric shock, or personal injury.
29 DO NOT remove the container from the motor base while the appliance is running.
30 To reduce the risk of injury, NEVER operate the appliance without the blade assembly
installed in a container. DO NOT try to defeat the interlock mechanism; make sure the
blade is properly installed before operating the appliance.
31
DO NOT expose containers to extreme temperature changes.
32 DO NOT overfill.
33 Max ON time is 60 seconds under 1100W load. If the appliance overheats, a thermal
switch will become activated and shut off the motor. To reset, let it cool down for
approximately 30 minutes before using it again.
34 To reduce the risk of burns, always allow the appliance to cool before taking off parts
and before cleaning.
35 To avoid injury, never attempt to place the Pro Extractor Blade™onto the motor base
without first assembling the blade assembly to the Nutri Ninja®Cup.
36 THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance
for anything other than its intended use. Do not use outdoors.
37 Appliance accessories are NOT intended to be used in the microwave. DO NOT place
the container in the microwave as it may result in damage to the accessories.
38 When using the grinder accessory, DO NOT remove Cover until blade has
COMPLETELY STOPPED.
39
When using the Grinder accessory, DO NOT attempt operation without the cover being in place.
40 When using the grinder accessory, DO NOT process liquid ingredients. The Grinder
accessory is not intended for liquid processing.
41 When using the grinder accessory, DO NOT attempt to chop ice.
41
Check Stainless Steel cup or Grinder accessory for presence of foreign objects before using.

4
®
www.sharkninjamanuals.com
ACCESSORIES
Select accessories are
included. Others are
available for purchase at
www.sharkninjamanuals.com
or by calling
1-877-646-5288.
Motor Base
WARNING: DO
NOT BLEND HOT
LIQUIDS
300 ml 500 ml 900 ml650 ml
Nutri Ninja®Cups
WARNING: DO
NOT BLEND HOT
LIQUIDS
650 ml
Double Wall
Stainless Steel
Ninja®Cup
1.4 L
Ninja Jar
WARNING: DO
NOT BLEND HOT
LIQUIDS
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUG H
BAS/ PÂ TE
Coffee and
Spice Grinder
Shaker Lid
Silicone Grip
Sleeve
NOTE: Sip & Seal lid, Spout lid and Pro Extractor Blades can be used with all Ninja Cups.
Pro Extractor
Blades™Spout Lid
Sip &
Seal®Lid
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND

5
®
1-877-646-5288
†
Extract a drink containing vitamins and nutrients
from fruits and vegetables.
FEATURES:
• Nutrient&VitaminExtraction†
• 1100WattMotor
• UserInterface:
Start/Stop
Start/Stop is a manual setting that runs at High speed for 60 seconds. This button can be pressed at any time if you wish to stop a program.
Smooth Boost™
SMOOTH BOOST YES/NO is a special feature available when using the Auto-iQ®EXTRACT and Auto-iQ BLEND. This setting can be used to control the consistency of your beverage
recipes. Select SMOOTH BOOST YES when smoother, creamier results are desired. This is the default program for both Auto-iQ EXTRACT and Auto-iQ BLEND programs. Select
SMOOTH BOOST NO when more of a textured consistency is desired.
Pulse
Offers greater control to help prevent over-processing or over-blending. Simply hold down the button and our blades will run at a high speed for a quick burst of power to break through
ice or chop vegetables.
AUTO-IQ EXTRACT†
EXTRACT should be used when blending hard, leafy, or fibrous whole fruits and vegetables, including apples, kale, and celery. This optimized program allows you to blend fresh items
with their skins, seeds, and stems into nutrient extractions. Before using EXTRACT, select Smooth Boost YES or NO depending on your desired consistency.
AUTO-IQ BLEND
BLEND can be used to make a range of beverages that do not include hard or fibrous fresh ingredients, such as milkshakes, protein smoothies, soft fresh-fruit smoothies, and frozen
cocktails. Before using BLEND, select SMOOTH BOOST YES or NO depending on your desired consistency.
• Sip&Seal®lids for drinks on the go.
• NutriNinja®CupsandSip&Seallids,BPAfree,anddishwashersafe.
NOTE: The Stainless Steel Ninja®Cup is NOT dishwasher safe.
• CordWraplocatedonbackofthemotorbase.
Ice to Snow
Crushing Ice to Snow is easy – take ice cubes directly from your freezer, and put in a dry Ninja®Cup – use the pulse feature in short quick bursts until it’s a snow like consistency.

6
®
www.sharkninjamanuals.com
ASSEMBLY &
USE OF THE
NUTRI NINJA®
CUP
NOTE: Ninja
®
Auto-iQ
®
Technology can sense
which container is on the
motor base. The function
lights will illuminate
depending on which
Nutri Ninja Cup is placed
on the motor base.
BEFORE FIRST USE:
•Remove all packaging material and labels from
the appliance.
•Wash the lids, cups, grinder, and blades in
warm, soapy water with a soft cloth.
•Rinse and dry thoroughly.
•NOTE: The Double Wall Stainless Steel Ninja
Cup is NOT dishwasher safe.
•Lids, cups and blades are all dishwasher safe. It
is recommended that the lids and attachments
be placed on the top rack. Ensure that the Pro
Extractor Blades™are removed from the cups
beforeplacinginthedishwasher.
•Wipe the motor base clean with a damp cloth.
ASSEMBLY:
WARNING: NEVER LEAVE THE APPLIANCE
UNATTENDED WHILE IN USE.
CAUTION: USE CAUTION WHEN HANDLING
THE BLADE ASSEMBLY AS IT IS VERY SHARP.
IMPORTANT: MAKE SURE THE MOTOR
BASE IS PLUGGED IN FOR USE.
1Place the motor base on a clean, dry, level
surface such as a counter or tabletop. Press
down on the motor base to make sure the
suction cups adhere to the counter or tabletop.
2Add ingredients to the Nutri Ninja cup.
3Place the Pro Extractor Blades onto the cup and
tightly screw on clockwise (A) until you have a
good seal.
4Turn the Nutri Ninja cup upside down and place
it onto the motor base (B), aligning the tabs on
the cup with the motor base. Rotate the Nutri
Ninja cup clockwise until it locks in place (you
will hear a click when the lock is engaged).
USE:
5Once the cup is engaged, the programs available
for that attachment will illuminate. Select
the program (C) desired based on your recipe.
The Auto-iQ program will stop the appliance
automatically at the end of the program.
6To pause the program, press the selected speed
or Auto-iQ Program a second time.
REMOVAL:
7Once you have reached your desired consistency,
press the START/STOP button to turn the
program off. Turn the Nutri Ninja cup anticlockwise
(D) and pull straight up to remove (E).
8Turn the cup upright and remove the Pro
Extractor Blades by twisting the Pro Extractor
Blades anticlockwise.
9 PlacetheSip&Seal®lid onto the Nutri Ninja
cup, twist to seal, and enjoy!
10 Make sure the appliance is unplugged when not
inuse.
11 To remove the motor base unit, tip the unit
forward from the rear to easily disengage the
suction cups.
For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.
CAUTION: Do not blend hot liquids. Allow the liquids or foods to cool to room temperature before blending.
CAUTION: Do not put hot liquids in the Stainless Steel 650 ml Nutri Ninja Cup before blending. Start with cool or room temperature liquid. Heated liquid can create
internal pressure in a sealed cup, which may erupt on opening and cause a burn injury.
IMPORTANT: Do not overfill. to avoid spilling, do not add ingredients past the “MAX” fill line.
IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1 second pulses. Do not overfill to avoid overheating the appliance.
Allow the appliance to cool after each use.
USE REMOVALASSEMBLY
A
or or
C
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND
D E
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND
B
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND

7
®
1-877-646-5288
ASSEMBLY OF
THE COFFEE
AND SPICE
GRINDER
ASSEMBLY:
IMPORTANT: DO NOT OVERFILL. TO AVOID
SPILLING, DO NOT ADD INGREDIENTS
PAST THE “MAX” FILL LINE.
CAUTION: Handle the blade assembly
with stainless steel grinding cup with
care when washing as the blades are very
sharp.
1 Place the motor base on a clean, dry, level
surface such as a counter or tabletop. Press
down on the motor base to make sure that the
suction cups adhere to the counter or tabletop.
2Make sure that the motor base is plugged in for
use. No lights will turn on.
3Add ingredients to the stainless steel grinding
cup. Use the measurement lines on the grinding
cup for added convenience!
4Place the lid onto the blade assembly with
stainless steel grinding cup so that the tabs
on the cup meet the entry point on the blade
assembly. Twist until the lid is locked in place (A).
5Place the grinder onto the motor base, aligning
the tabs on the grinder with the motor base.
Turn it clockwise, until you feel it click into
place (B).
6Use only START/STOP setting in short intervals
until you reach your desired consistency (C).
7To remove the grinder, ensure that the motor has
stopped running. Do not remove cover until
blade has completely stopped. Then turn the
grinder anticlockwise (D) and pull straight up to
remove (E).
8Remove the blade assembly with stainless steel
cup by twisting the lid anticlockwise. Be sure
to store the grinder with the lid attached to the
blade assembly with the stainless steel cup.
9Make sure that the motor base is unplugged
when not in use.
11 To remove the motor base unit, tip the unit
forward from the rear to easily disengage the
suction cups.
COFFEE AND SPICE GRINDER
If your unit comes with this accessory, read the following instructions. For a list of what is included with this model, refer to inside flap of the box.
WARNING: Never leave the appliance unattended while in use.
WARNING: Do not process liquid ingredients. The grinder accessory is not intended for liquid processing. Do not attempt to chop ice.
CAUTION: Check the grinding cup for presence of foreign objects before using.
A B C D E
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND
START
STOP
PULSE
SMOOTH
BOOST
YES
NO
EXTRACT
BLEND

8
®
www.sharkninjamanuals.com
CARE &
MAINTENANCE
CLEANING:
CAUTION: MAKE SURE THAT THE
MOTOR BASE IS UNPLUGGED FROM THE
POWER SOURCE BEFORE INSERTING
OR REMOVING ANY ATTACHMENT AND
BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR
BASE INTO WATER OR ANY OTHER
LIQUID.
CAUTION: HANDLE BLADES CAREFULLY
AS THE BLADES ARE VERY SHARP.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and
wipe dry.
NOTE: The Double Wall Stainless Steel Nutri
Ninja®Cup is NOT dishwasher safe.
3 Place the cups, lids and blade assemblies in the
top rack of the dishwasher.
OR
4 Carefully hand wash the cups, lids, and blade
assemblies in warm, soapy water with a soft cloth.
NOTE: If the appliance needs servicing, please
call customer service at 1-877-646-5288.
STORING:
1 Store the Nutri Ninja with Auto-iQ
®
Pro
Complete upright. Secure the power cord on the
back of the base by wrapping the cord around
the cord wrap. Do not place anything on top
of the unit. Store the cups and the rest of the
attachments where they will not be damaged
and won’t cause a hazard.
RESETTING THE MOTOR
THERMOSTAT:
The Nutri Ninja with Auto-iQ Pro Complete features
a safety system that prevents damage to the unit’s
motor and drive system should you inadvertently
overload the appliance. If the appliance is
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no
food is jamming the cutting blades.
3 Allow the appliance to cool for approximately
30 minutes.
4 Re-install the cup onto the motor base and re-
plug the appliance into the electrical outlet.
5 Proceed with using the appliance as before
while making sure not to exceed the maximum
recommended capacities.

9
®
1-877-646-5288
Unit doesn’t turn on:
• Make sure the unit is plugged in and the START/STOP button is pressed.
•Insertandrotatecupclockwiseinthebaseuntilitclicksintoplace.Displayshouldturnon.
Unit doesn’t turn off:
•Remove cup from base by rotating cup anticlockwise and lifting out. Display should turn off. Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
•Set the cup on a level surface. Place the lid or blade assembly on the top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so
that the lid/blades evenly align to the cup until you have a tight seal.
Doesn’t mix well, food gets stuck:
•Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and pauses allow the food to settle towards the blade. If food is routinely getting
stuck adding some liquid will usually help.
•Whenpackingthecups,startwithfreshitems,thenaddliquids,powders/dryingredients,andnallyfrozenitemsorice.
Unit moves on the counter while blending:
•Makesurethesurfaceaswellasthefeetoftheunitarecleananddry.
Unit is difficult to remove from the counter for storage:
•Toremovethemotorbaseunit,tiptheunitforwardfromthereartoeasilydisengagethesuctioncups.
TROUBLE-
SHOOTING
GUIDE
TheEuro-Pro,Sip&Seal,Auto-iQ,Nutri-NinjaandNinjaareregisteredtrademarksofEuro-ProOperatingLLC.
Pro Extractor Blades is a trademark of Euro-Pro Operating LLC.

10 www.sharkninjamanuals.com
®
PRODUCT REGISTRATION
Please visit www.sharkninjamanuals.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase
and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings
set forth in the accompanying instructions.
**THIS WARRANTY IS FOR ALL COUNTRIES EXCEPT GERMANY**
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilised for normal household use, subject
to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not
apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty
packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any
of its parts, which have been performed by a repair person not authorised by EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance
with warranty service options or customer support, please call our customer care and product specialists at , call 1 [phone] or visit our website www.sharkninjamanuals.com.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase is required and a fee of $19.95 will apply to
cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any,
is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to
anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete
address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as
damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

1-877-646-5288 11
®
**THIS WARRANTY IS FOR GERMANY ONLY**
PRODUCT REGISTRATION
Please visit www.sharkninjamanuals.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase
and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings
set forth in the accompanying instructions.
TWO (2) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of two (2) years from the date of purchase when utilised for normal household use, subject
to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not
apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty
packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any
of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance
with warranty service options or customer support, please call our customer care and product specialists at , call 1 [phone] or visit our website www.sharkninjamanuals.com.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase is required and a fee of $19.95 will apply to
cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is
limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone
of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete
address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as
damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

BL488�INTL �30�150824�1
© 2015 Euro-Pro Operating LLC
Illustrations may differ from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are
subject to change without notice.
Printed in China
www.sharkninjamanuals.com 1-877-646-5288
Euro-Pro Operating LLC
Newton, MA USA 02459
Ville St. Laurent, Québec Canada H4S 1A7