Ninja BL660C User manual

ninjakitchen.com
1 877 646-5288
BL660C
OWNER’S GUIDE
GUIDE DU PROPRIÉTAIRE
®

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA®PROFESSIONAL BLENDER
WITH NUTRI NINJA®CUPS.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will
fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. DO NOT modify the
plug in any way.
WARNING: Extension cords are
not recommended for use with this product.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1WARNING: Remove utensils prior to
processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.
2WARNING: Stacked Blade Assembly
is sharp, not locked in place and
removable, handle with care. When
handling the Stacked Blade Assembly,
always hold it by the shaft. Failure to
do so will result in a risk of laceration .
3 WARNING: Stacked Blade Assembly
is sharp and not locked in place. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, carefully remove
the Stacked Blade Assembly first
holding it by the shaft. Failure to do so
will result in a risk of laceration .
4 CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
buildup, resulting in risk of the user
being burned.
5 CAUTION: We do not recommend
grinding in any of our Nutri Ninja®cups.
6 CAUTION: Remove the Nutri Ninja
Blade Assembly from the cup upon
completion of blending. Some
ingredients have the potential to
expand after blending resulting in
excessive pressure buildup that can
pose a risk of injury.
7To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.

2
ninjakitchen.com
EN
20 To reduce risk of injury, never place the
blade assemblies on the base without
the pitcher or Nutri Ninja®cup properly
attached.
21 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
22 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
23 DO NOT remove the container from the
motor base while the appliance is in
operation.
24 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
25 DO NOT expose containers to extreme
temperature changes.
26 DO NOT overfill.
27 DO NOT operate the appliance empty.
28 If the appliance overheats, a thermal switch
will become activated and shut off the
motor. To reset, unplug the appliance and let
it cool down for approximately 15 minutes
before using again.
29 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than its
intended use. Do not use outdoors.
30 The maximum rating is based on the
Stacked Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less
power or current.
SAVE THESE
INSTRUCTIONS
8 DO NOT allow the appliance to be used by
children. Close attention is necessary when
used near children. This is not a toy.
9Never leave an appliance unattended when
inuse.
10 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
11 Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
12 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
13 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
14 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
15 Always use appliance on a dry, level surface.
16 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
17 Avoid contact with moving parts.
18 DO NOT attempt to sharpen blades.
19 DO NOT use the appliance if blade
assemblies are bent or damaged.

31-877-646-5288
CONSIGNES DE SÉCURITÉ IMPORTANTES
Pour usage domestique seulement
LORS DE L’USAGE D’UN APPAREIL
ÉLECTRIQUE, DES MESURES DE SÉCURITÉ
ÉLÉMENTAIRES DEVRAIENT TOUJOURS
ÊTRE RESPECTÉES, Y COMPRIS LES
MESURES SUIVANTES :
LISEZ TOUTES LES INSTRUCTIONS
AVANT D’UTILISER VOTRE MÉLANGEUR
PROFESSIONNEL NINJAMD AVEC LES
GOBELETS NUTRI NINJAMD.
FICHE POLARISÉE
AVERTISSEMENT : Afin de
réduire les risques d’électrocution, cet appareil a
été muni d’une fiche polarisée (une lame est plus
large que l’autre). Cette fiche ne peut être insérée
que d’un seul côté dans une prise polarisée. Si la
fiche ne s’insère pas complètement dans la prise
de courant, inversez-la. Si elle ne s’adapte
toujours pas, contactez un électricien compétent
afin d’installer la prise murale appropriée.
N’altérez la fiche d’AUCUNE façon.
AVERTISSEMENT : Il n’est pas
recommandé d’utiliser des rallonges
électriques pour brancher cet appareil.
AVERTISSEMENT :
POUR RÉDUIRE LE RISQUE D’INCENDIE,
D’ÉLECTROCUTION ET DE BLESSURES :
1 AVERTISSEMENT : Enlevez les ustensiles
avant de mélanger les aliments. Le
non-respect de cette directive pourrait
endommager ou faire éclater le récipient, ce
qui pourrait causer des blessures.
2AVERTISSEMENT : Le jeu de lames
superposées est tranchant et amovible; il
n’est pas verrouillé dans le récipient.
Manipulez-le avec soin. Lorsque vous
manipulez le jeu de lames superposées,
tenez toujours l’arbre de cette pièce. Le
non-respect de cette consigne peut
entraîner des lacérations.
3 AVERTISSEMENT : Le jeu de lames
superposées est tranchant et n’est pas
verrouillé dans le récipient. Si vous
transvidez un mélange par le bec verseur,
assurez-vous que le couvercle est bien
verrouillé sur le pichet. Pour verser sans le
couvercle, retirez d’abord le jeu de lames
superposées avec précaution en le tenant
par le manche. Ne pas procéder de la sorte
augmente le risque de lacération.
4 MISE EN GARDE : Ne mélangez pas des
liquides chauds, car cela pourrait entraîner
une accumulation de pression et causer des
risques de brûlure.
5 MISE EN GARDE : Nous ne
recommandons pas la mouture
d’ingrédients dans les gobelets Nutri
Ninja
MC
, peu importe lequel.
6 AVERTISSEMENT : Retirez le jeu de
lames Nutri Ninja du gobelet après avoir
mélangé les ingrédients. Certains
ingrédients peuvent prendre de l’expansion
lorsqu’ils sont broyés, ce qui peut créer une
pression excessive et poser un risque de
blessures.

4
ninjakitchen.com
FR
20 Afin de réduire les risques de blessures, ne placez
jamais l’un des jeux de lames sur le bloc-moteur
sans y avoir bien fixé le pichet ou le gobelet Nutri
Ninja
MC
.
21 N’UTILISEZ PAS cet appareil sur une surface
chaude ou près de celle-ci (brûleur à gaz, plaque
électrique ou four chaud).
22 L’utilisation d’accessoires non recommandés par
le fabricant, y compris des bocaux de conserve,
peut causer un incendie ou des blessures, ou
entraîner l’électrocution.
23 NE RETIREZ PAS le récipient du bloc-moteur
lorsque l’appareil est en marche.
24 Pour réduire le risque de blessure, n’allumez
JAMAIS l’appareil sans d’abord mettre le
couvercle en place; NE TENTEZ PAS de
contourner ou de désactiver le mécanisme de
verrouillage. Lorsque vous utilisez un accessoire,
assurez-vous que celui-ci est bien installé avant
d’utiliser l’appareil.
25 N’EXPOSEZ PAS les récipients à des
changements extrêmes de température.
26 NE REMPLISSEZ PAS excessivement le
récipient.
27 NE FAITES PAS fonctionner l’appareil à vide.
28 En cas de surchauffe de l’appareil, le disjoncteur
thermique coupe le moteur.Pour le réinitialiser,
débranchez l’appareil et laissez-le refroidir
pendant environ 15 minutes avant de l’utiliser de
nouveau.
29 CET APPAREIL EST CONÇU POUR UN USAGE
DOMESTIQUE SEULEMENT. N’utilisez l’appareil
qu’aux fins pour lesquelles il est prévu. N’utilisez
pas cet appareil à l’extérieur.
30 La puissance maximale correspond à l’utilisation
du Jeu de lames superposées (pichet), qui
requiert la plus grande puissance. D’autres
accessoires recommandés par le fabricant
peuvent nécessiter une puissance ou un courant
nettement inférieur(e).
VEUILLEZ
CONSERVER CES
DIRECTIVES
7Pour éviter les risques d’électrocution, n’immergez
pas l’appareil et assurez-vous que le cordon
d’alimentation n’entre pas en contact avec l’eau
ou un autre liquide.
8 NE LAISSEZ PAS l’appareil être utilisé par des
enfants. Une surveillance attentive est nécessaire
lors de l’utilisation à proximité des enfants. Ceci
n’est pas un jouet.
9Ne laissez jamais l’appareil sans surveillance
pendant l’utilisation.
10 Les accessoires accompagnant cet appareil ne
sont pas conçus pour être utilisés dans le four à
micro-ondes, car cela pourrait les endommager.
11 Veuillez éteindre l’appareil (position « Off ») et
débrancher le cordon d’alimentation de la prise
de courant lorsqu’il n’est pas utilisé et avant le
nettoyage, l’assemblage ou le démontage des
pièces. Pour débrancher l’appareil, tirez sur la
fiche et retirez-la de la prise d’alimentation. Ne
tirez jamais sur le cordon.
12 PRENEZ SOIN du cordon d’alimentation. Ne
transportez jamais l’appareil en le tenant par
le cordon. Ne débranchez jamais l’appareil de
l’alimentation électrique en tirant sur le cordon.
13 N’UTILISEZ PAS l’appareil si sa fiche ou son
cordon est endommagé(e), s’il a fait défaut ou
s’il a été échappé ou endommagé. Cet appareil
ne contient aucune pièce pouvant être réparée
par l’utilisateur. Retournez l’appareil à SharkNinja
Operating LLC pour vérification, réparation ou
réglage.
14 NE LAISSEZ PAS le cordon traîner sur le dessus
d’une table ou d’un comptoir. Ne le laissez pas
entrer en contact avec des surfaces chaudes,
comme la cuisinière.
15 Utilisez toujours l’appareil sur une surface sèche
et de niveau.
16 Afin de réduire le risque de blessures graves ou
de dommages à l’appareil, gardez les mains, les
cheveux, les vêtements et les ustensiles hors
du récipient pendant l’utilisation. Vous pouvez
utiliser une raclette, mais seulement lorsque le
mélangeur est éteint.
17 Évitez le contact avec les pièces mobiles.
18 NE TENTEZ PAS d’affûter les lames.
19 N’UTILISEZ PAS l’appareil si les jeux de lames
sont tordus ou endommagés.

51-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL660C
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1100 Watts
Pitcher Capacity: 2.15 L (72 oz)
MAX Liquid Capacity: 1.9 L (64 oz)
Nutri Ninja Cup™Capacity: 470 ml (16 oz)
CE MANUEL CONCERNE LE MODÈLE :
BL660C
SPÉCIFICATIONS TECHNIQUES
Tension : 120 V, 60 Hz
Alimentation : 1100 W
Capacité du pichet : 2,15 L (72 oz)
Capacité MAX de liquide : 1,9 L (64 oz)
Capacité du gobelet Nutri NinjaMC : 470 ml (16 oz)

6
ninjakitchen.com
EN
Contents
Table des matières
Getting to Know Your Ninja Professional Blender with Nutri Ninja Cups ................................... 7
Before First Use .................................................................................................................. 9
Assembly & Use of the Pitcher........................................................................................... 10
Assembly & Use of the Nutri Ninja™Cup ............................................................................ 12
Care & Maintenance ........................................................................................................ 13
Speed Chart .................................................................................................................... 14
Troubleshooting Guide....................................................................................................... 14
Replacement Parts............................................................................................................ 14
Warranty & Registration..................................................................................................... 16
Familiarisez-vous avec votre mélangeur professionnel Ninja et avec vos gobelets Nutri Ninja...... 17
Avant la première utilisation ................................................................................................... 19
Assemblage et utilisation du pichet ......................................................................................... 20
Assemblage et utilisation du gobelet Nutri Ninja....................................................................... 22
Soins et entretien................................................................................................................... 23
Diagramme des réglages de vitesse........................................................................................ 24
Guide de dépannage.............................................................................................................. 24
Pièces de rechange................................................................................................................ 24
Garantie et enregistrement ..................................................................................................... 26
Thank you for
purchasing
the Ninja®
Professional
Blender with
Nutri Ninja™
Cups.
Merci d’avoir
acheté le
mélangeur
professionnel
NinjaMD et les
gobelets Nutri
NinjaMD.
FR

71-877-646-5288
e Pitcher Lid with Locking Handle
fStacked Blade Assembly
gMotor Base
h Power Cord (not shown)
aNutri Ninja™Cup (x2)
bTo-Go Lids (x2)
cNutri Ninja Blade Assembly
dPitcher
a
b
d
e
g
f
c
Getting To Know Your Ninja®Professional Blender with Nutri Ninja®Cups

8
ninjakitchen.com
EN
FEATURES:
• Ninja Blade Technology
• 2.15 L Pitcher (MAX Liquid Capacity: 1.9 L) - BPA Free
• Nutri Ninja Cups - BPA Free
• Cord Storage
• Lock-On Lid, Featuring Pour Spout
• Easy-to-Clean Electronic Control Panel
*Extract a drink containing vitamins and nutrients from fruits & vegetables
The Ninja®Professional Blender with Nutri Ninja™Cups is a high powered innovative tool with a compact design and
outstanding performance. It is perfect for ice crushing, chopping, blending, and Nutrient and Vitamin Extraction*.

91-877-646-5288
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the attachment in
first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
blender pitcher. Failure
to do so will result in a
risk of laceration.
WARNING: Stacked
Blade Assembly is
sharp and not locked
in place. If pouring
with the lid removed,
carefully remove
the Stacked Blade
Assembly first holding
it by the shaft. Failure
to do so will result in a
risk of laceration.
CAUTION: Do not immerse the motor base
into water or any other liquid.
1Remove all packaging material and labels from the appliance.
Separate/remove all parts from each other.
2Wash the lids, pitcher, Nutri Ninja cups and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the Stacked Blade Assembly
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp.
3Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4The pitcher, Nutri Ninja cups, lids, Stacked Blade
Assembly and Nutri Ninja Blade Assembly are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
the blade assembly is removed from the cup or pitcher
before placing in the dishwasher.
5Wipe the motor base clean with a damp cloth.

10
ninjakitchen.com
EN
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3Align and lower the pitcher onto the motor
base. (Fig. 1) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4Rotate the blender pitcher clockwise until it clicks in
place. As the pitcher rotates, it will lower and the safety
tabs on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
5The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 oz.) on the pitcher.
8Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the pitcher and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
9Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning the
arrow ( ) located on the lid with the arrow ( ) located
on the pitcher’s handle. (Fig. 5)
ASSEMBLY
It’s best to add the liquid ingredients first and then the dry ingredients.
Fig. 4
Fig. 3a
Fig. 5Fig. 3b
OR
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 2Fig. 1
Assembly & Use of the Pitcher

11 1-877-646-5288
USE REMOVAL
13 Open the pour spout cap and use the spout to empty
liquid contents.
14 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.
15 Make sure that the unit is unplugged when not in use.
Assembly and Use for the Pitcher - cont.
10 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
12 To remove the lid, pull the lid handle up to a 90° angle.
Turn the blender pitcher counter-clockwise to lift off the
base. (Fig. 7, Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
Fig. 6 Fig. 7 Fig. 8

12
ninjakitchen.com
EN
Use of the Nutri Ninja®Cup
7When you have reached your desired consistency,
stop the appliance by removing your hand from the
Single Serve button. To remove the Nutri Ninja cup turn
it counter-clockwise (Fig. 4) and pull straight up to
remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
8Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly to the left.
9Place the To-Go lid onto the Nutri Ninja cup, twist to
seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
For best results, use short “PULSES”... Practice makes perfect!!
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3Add ingredients to the Nutri Ninja cup.
4Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
6Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
ASSEMBLY USE REMOVAL
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5

13 1-877-646-5288
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1Separate/remove all parts from each other.
2Hand Washing: Wash the lids, pitcher, Nutri Ninja™cups
and blade assemblies in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
WARNING: Handle the Stacked Blade Assembly
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp. Contact with
the blades’ edges can result in laceration.
3Dishwasher: The pitcher, Nutri Ninja cups, lids, Stacked
Blade Assembly and Nutri Ninja Blade Assembly are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
the blade assembly is removed from the cup or pitcher
before placing in the dishwasher.
4Wipe the motor base clean with a damp cloth .
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
HOW TO STORE
1Store the Ninja®Professional Blender upright with the
pitcher on the motor base, Stacked Blade Assembly
inside the pitcher and lid locked on the pitcher. Do
not place anything on top. Store the Nutri Ninja Blade
Assembly attached to the Nutri Ninja cup and the rest
of the attachments along side the appliance or in a
cabinet where they will not be damaged and won’t
cause a hazard. Insert the power cord into the cord
storage area located in the back of the motor base.
Cord Storage
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3Allow the appliance to cool for approximately 15
minutes.
4Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

14
ninjakitchen.com
EN
Speed Chart
Troubleshooting Guide
To order additional parts and accessories, please visit our website: ninjakitchen.com or feel
free to contact customer service: 1-877-646-5288.
Replacement Parts
IMPORTANT: Do not run the appliance over 4 minutes at a time to prevent overheating of the appliance.
* When blending sauces and soups, make sure they’re cooled to room temperature first - Ninja
®
containers are not intended for
hot blending.
BUTTON FUNCTION USE
POWER On/Off Always turn appliance 'Off' when not in use.
1Processing &
Mixing
Use to mix thin batters, gravies and marinades, scramble eggs, puree cooked
foods and uncooked fruits and chop vegetables for dips and salsa.
2Blending
Use to grate hard cheeses, cream soups*, beat dips, grind nuts, thorough
chopping, blend sauces* and spreads. Blend mixed drinks, powdered drinks
or milk shakes.
3
Pureeing,
Liquefying & Ice
Crushing
Use to mix smoothies, frappes, liquefy thick mixtures and blend whole
fruits and vegetables. Crush ice cubes for snow cones, chilled beverages or
frozen slushes.
PULSE
Controlled
Processing &
Bursts of Power
Use to control chopping and processing.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Control Panel Lights Are
Blinking, Motor Doesn’t
Start or Blade Assembly
Doesn’t Rotate.
Make sure the pitcher is securely placed on motor base.
Make sure the lid is securely on pitcher in the correct position (align arrows).
The blender is turned 'Off'. Press the power button ( ) to turn 'On'.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Food is Unevenly Chopped. Either you are chopping too much food at one time, you are chopping food with different
textures or the pieces are not of even size. Process smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery. The food has been over processed. Use pulse button for controlled processing.
Food Collects on the Lid or on
the Sides of the Pitcher. The mixture is too thick. Add more liquid.
You Cannot Achieve Snow From
Solid Ice. Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.

15 1-877-646-5288
Notes

16
ninjakitchen.com
EN
PRODUCT REGISTRATION
Please visit ninjakitchen.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of purchase.
You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.

17 1-877-646-5288
eCouvercle du pichet avec poignée de verrouillage
f Jeu de lames superposées
g Bloc-moteur
h Cordon d’alimentation (non illustré)
a Gobelet Nutri NinjaMC (x 2)
b Couvercles étanches (x 2)
c Jeu de lames Nutri Ninja
d Pichet
a
b
d
e
g
f
c
Familiarisez-vous avec votre mélangeur professionnel NinjaMD et avec vos
gobelets Nutri NinjaMD

18
ninjakitchen.com
FR
CARACTÉRISTIQUES :
• Technologie de lames Ninja
• Pichet de 2,15 L (capacité de liquide max. : 1,9 L) – sans bisphénol A (BPA)
• Gobelets Nutri NinjaMC – sans bisphénol A (BPA)
• Rangement du cordon
• Couvercle avec mécanisme de verrouillage et bec verseur
• Panneau de commande électronique facile à nettoyer
* Extrait les vitamines et les nutriments des fruits et des légumes lors de la préparation des boissons.
Le mélangeur professionnel NinjaMD avec les gobelets Nutri NinjaMC est un appareil novateur très puissant et compact
qui offre une performance exceptionnelle. Voici l’appareil idéal pour broyer la glace, hacher et mélanger des aliments, et
extraire les vitamines et les nutriments*.

19 1-877-646-5288
Avant la première utilisation
MISE EN GARDE : N’immergez pas le bloc-moteur dans
l’eau ni dans un autre liquide.
1Retirez tous les composants d’emballage et toutes les
étiquettes de l’appareil. Retirez et désassemblez toutes les
pièces.
2lavez les couvercles, le pichet, les gobelets Nutri Ninja et les
jeux de lames superposées à l’eau savonneuse tiède. Lorsque
vous nettoyez les jeux de lames, utilisez une petite vadrouille
avec un manche pour éviter de toucher les lames avec vos
mains.
AVERTISSEMENT : Manipulez le jeu de lames
superposées et le jeu de lames Nutri NinjaMC avec soin
lorsque vous les nettoyez, car les lames sont
tranchantes.
3Manipulez les jeux de lames prudemment afin d’éviter
de toucher les arêtes tranchantes. Rincez et séchez
complètement les pièces.
4Le pichet, les gobelets Nutri Ninja, les couvercles, le jeu
de lames superposées et le jeu de lames Nutri Ninja sont
résistants au lave-vaisselle. Il est recommandé de mettre les
couvercles et les jeux de lames dans le panier supérieur du
lave-vaisselle. Veuillez retirer le jeu de lames du gobelet ou du
pichet avant de les mettre dans le lave-vaisselle.
5Nettoyez le bloc-moteur avec un chiffon humide.
VEUILLEZ GARDER À L’ESPRIT CES
DIRECTIVES DE SÉCURITÉ IMPORTANTES
LORSQUE VOUS UTILISEZ L’APPAREIL :
IMPORTANT : Assurez-vous que le
bloc-moteur est branché avant d’utiliser
l’appareil.
IMPORTANT : Il faut toujours insérer le jeu
de lames dans le récipient avant d’y ajouter
des ingrédients.
IMPORTANT : Les accessoires ne sont pas
interchangeables.
IMPORTANT : NE METTEZ PAS l’appareil en
marche sans d’abord mettre le couvercle.
IMPORTANT : Ne faites pas fonctionner
l’appareil à vide.
IMPORTANT : Les accessoires accompagnant
cet appareil ne sont pas conçus pour être
utilisés dans le four à micro-ondes, car cela
pourrait les endommager.
AVERTISSEMENT : Le
jeu de lames superposées
est tranchant et n’est pas
verrouillé dans le récipient. Si
vous transvidez un mélange
par le bec verseur, assurez-
vous que le couvercle est bien
verrouillé sur le pichet-
mélangeur. Le non-respect de
cette consigne peut entraîner des
lacérations.
AVERTISSEMENT:
Le jeu de lames
superposées est
tranchant et n’est
pas verrouillé dans le
récipient. Pour verser
sans le couvercle,
retirez d’abord le jeu
de lames superposées
avec précaution en le tenant par le
manche. Ne pas procéder de la sorte
augmente le risque de lacération.