Ninja BL665 Series User manual

In cooperation with the U.S. Consumer Product Safety Commission Post until March 9, 2016
IMPORTANT SAFETY NOTICE
Ninja® BL660 Series Professional Blender
Models BL660*, BL663*, and BL665*
Sold between March 2012 and September 2015
HAZARD
LACERATION RISK IF CONSUMERS POUR FROM OR INVERT THE BLENDER’S
PITCHER AFTER REMOVING THE LID, WITHOUT ALSO CAREFULLY REMOVING
THE LOOSE STACKED BLADE ASSEMBLY FROM THE PITCHER
Consumers should check their blender to determine if they have one of the above
models. All potentially affected blenders show the model number on the rating
label that is molded into the bottom of the motor base.
This recall does not require consumers to return their blenders. The recall is to
provide consumers with revised instructions, advising that consumers should
empty the blender’s pitcher through the locked lid’s pour spout, or, alternatively,
by removing both the lid and the stacked blade assembly from the pitcher before
pouring.
If you have an affected blender, please visit
www.ninjarecall.com to download revised safety
instructions, or call Ninja at:
1-877-593-5140
7:00 a.m. to 11:00 p.m. Eastern Time Monday –Saturday,
and 9:00 a.m. to 8:00 p.m. Eastern Time Sunday
* BL660, BL660B, BL660C, BL660QCN, BL660QPL, BL660W, BL660WM, BL663,
BL663CO, BL665QBK, BL665QCN, and BL665QWH

RECALL NOTICE
REVISED WARNINGS AND INSTRUCTIONS
Re: Revised Instructions for Ninja BL660 Series Professional Blenders in Recall to Warn
of Laceration Risk
Dear Valued Customer:
The reliability and safety of our products is of utmost importance to SharkNinja. In order to
ensure the safety of our consumers, we, in cooperation with the U.S. Consumer Product Safety
Commission and Health Canada, have revised the warning and safety instructions for Ninja®
BL660 series professional blenders. The blender’s stacked blade assembly poses a laceration
risk if consumers pour from or invert the blender’s pitcher after removing the lid, without also
carefully removing the loose stacked blade assembly from the pitcher.
This recall neither requires consumers to return their blenders nor for retailers to stop the
sale of any units. Rather, the purpose is to provide consumers with revised instructions,
advising that consumers should empty the blender’s pitcher through the locked lid’s pour spout,
or, alternatively, by removing both the lid and the stacked blade assembly from the pitcher
before pouring.
Based on our records, you purchased affected products for resale. Enclosed are recall posters
announcing the revised instructions. Please display these posters in a highly visible location
within stores that sold the recalled models for a period of no less than 120 days. The revised
instructions are enclosed and can also be obtained either by clicking on our website
(www.ninjarecall.com) or from a link in the joint news release with the U.S. Consumer Product
Safety Commission and Health Canada.
SharkNinja is committed to ensuring that our products are safe and reliable by setting high
standards for quality control and thoroughly investigating any reported issues.
We take seriously the trust you and our shared customers place in the quality of SharkNinja
products. Please contact me at 617-243-0235 if you have any questions or comments. Thank you
for your business and cooperation. This recall is in cooperation with the U.S. Consumer Product
Safety Commission and Health Canada; they will monitor the effectiveness of this recall
program.
Sincerely,
Neil Shah
SVP Strategic Sales
Enclosure

ninjakitchen.com
1 877 646-5288
BL663CO
OWNER’S GUIDE
®

1 2
ninjakitchen.com1-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA®PROFESSIONAL BLENDER
WITH NUTRI NINJA®CUPS.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will
fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. DO NOT modify the
plug in any way.
WARNING: Extension cords are
not recommended for use with this product.
20 To reduce risk of injury, never place the
blade assemblies on the base without
the pitcher or Nutri Ninja®cup properly
attached.
21 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
22 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
23 DO NOT remove the container from the
motor base while the appliance is in
operation.
24 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
25 DO NOT expose containers to extreme
temperature changes.
26 DO NOT overfill.
27 DO NOT operate the appliance empty.
28 If the appliance overheats, a thermal switch
will become activated and shut off the
motor. To reset, unplug the appliance and let
it cool down for approximately 15 minutes
before using again.
29 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than its
intended use. Do not use outdoors.
30 The maximum rating is based on the
Stacked Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less
power or current.
SAVE THESE
INSTRUCTIONS
8 DO NOT allow the appliance to be used by
children. Close attention is necessary when
used near children. This is not a toy.
9Never leave an appliance unattended when
inuse.
10 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
11 Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
12 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
13 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
14 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
15 Always use appliance on a dry, level surface.
16 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
17 Avoid contact with moving parts.
18 DO NOT attempt to sharpen blades.
19 DO NOT use the appliance if blade
assemblies are bent or damaged.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1WARNING: Remove utensils prior to
processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.
2WARNING: Stacked Blade Assembly
is sharp, not locked in place and
removable, handle with care. When
handling the Stacked Blade Assembly,
always hold it by the shaft. Failure to
do so will result in a risk of laceration .
3 WARNING: Stacked Blade Assembly
is sharp and not locked in place. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, carefully remove
the Stacked Blade Assembly first
holding it by the shaft. Failure to do so
will result in a risk of laceration .
4 CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
buildup, resulting in risk of the user
being burned.
5 CAUTION: We do not recommend
grinding in any of our Nutri Ninja®cups.
6 CAUTION: Remove the Nutri Ninja
Blade Assembly from the cup upon
completion of blending. Some
ingredients have the potential to
expand after blending resulting in
excessive pressure buildup that can
pose a risk of injury.
7To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.

3 4
ninjakitchen.com1-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL663CO
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1100 Watts
Pitcher Capacity: 2.15 L (72 oz)
MAX Liquid Capacity: 1.9 L (64 oz)
Nutri Ninja Cup™Capacity: 470 ml (16 oz)
Contents
Getting to Know Your Ninja Professional Blender with Nutri Ninja Cups ................................... 5
Before First Use .................................................................................................................. 7
Assembly & Use of the Pitcher............................................................................................. 8
Assembly & Use of the Nutri Ninja™Cup ............................................................................ 10
Care & Maintenance ........................................................................................................ 11
Speed Chart .................................................................................................................... 12
Troubleshooting Guide....................................................................................................... 12
Replacement Parts............................................................................................................ 12
Warranty & Registration..................................................................................................... 14
Thank you for
purchasing
the Ninja®
Professional
Blender with
Nutri Ninja™
Cups.

5 6
ninjakitchen.com1-877-646-5288
e Pitcher Lid with Locking Handle
fStacked Blade Assembly
gMotor Base
h75 Recipe Cookbook
i Power Cord (not shown)
aNutri Ninja™Cup (x3)
bTo-Go Lids (x3)
cNutri Ninja Blade Assembly
dPitcher
a
b
d
e
g
f
c
Getting To Know Your Ninja®Professional Blender with Nutri Ninja®Cups
FEATURES:
• Ninja Blade Technology
• 2.15 L Pitcher (MAX Liquid Capacity: 1.9 L) - BPA Free
• Nutri Ninja Cups - BPA Free
• Cord Storage
• Lock-On Lid, Featuring Pour Spout
• Easy-to-Clean Electronic Control Panel
*Extract a drink containing vitamins and nutrients from fruits & vegetables
The Ninja®Professional Blender with Nutri Ninja™Cups is a high powered innovative tool with a compact design and
outstanding performance. It is perfect for ice crushing, chopping, blending, and Nutrient and Vitamin Extraction*.
h

7 8
ninjakitchen.com1-877-646-5288
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the attachment in
first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
blender pitcher. Failure
to do so will result in a
risk of laceration.
WARNING: Stacked
Blade Assembly is
sharp and not locked
in place. If pouring
with the lid removed,
carefully remove
the Stacked Blade
Assembly first holding
it by the shaft. Failure
to do so will result in a risk of
laceration.
CAUTION: Do not immerse the motor base
into water or any other liquid.
1Remove all packaging material and labels from the appliance.
Separate/remove all parts from each other.
2Wash the lids, pitcher, Nutri Ninja cups and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the Stacked Blade Assembly
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp.
3Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4The pitcher, Nutri Ninja cups, lids, Stacked Blade
Assembly and Nutri Ninja Blade Assembly are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
the blade assembly is removed from the cup or pitcher
before placing in the dishwasher.
5Wipe the motor base clean with a damp cloth.
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3Align and lower the pitcher onto the motor
base. (Fig. 1) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4Rotate the blender pitcher clockwise until it clicks in
place. As the pitcher rotates, it will lower and the safety
tabs on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
5The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 oz.) on the pitcher.
8Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the pitcher and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
9Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning the
arrow ( ) located on the lid with the arrow ( ) located
on the pitcher’s handle. (Fig. 5)
ASSEMBLY
It’s best to add the liquid ingredients first and then the dry ingredients.
Fig. 4
Fig. 3a
Fig. 5Fig. 3b
OR
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 2Fig. 1
Assembly & Use of the Pitcher

9 10
ninjakitchen.com1-877-646-5288
USE REMOVAL
13 Open the pour spout cap and use the spout to empty
liquid contents.
14 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.
15 Make sure that the unit is unplugged when not in use.
Assembly and Use for the Pitcher - cont.
10 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
12 To remove the lid, pull the lid handle up to a 90° angle.
Turn the blender pitcher counter-clockwise to lift off the
base. (Fig. 7, Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
Fig. 6 Fig. 7 Fig. 8
Use of the Nutri Ninja®Cup
7When you have reached your desired consistency,
stop the appliance by removing your hand from the
Single Serve button. To remove the Nutri Ninja cup turn
it counter-clockwise (Fig. 4) and pull straight up to
remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
8Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly to the left.
9Place the To-Go lid onto the Nutri Ninja cup, twist to
seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
For best results, use short “PULSES”... Practice makes perfect!!
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3Add ingredients to the Nutri Ninja cup.
4Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
6Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
ASSEMBLY USE REMOVAL
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.

11 12
ninjakitchen.com1-877-646-5288
Care & Maintenance Speed Chart
Troubleshooting Guide
To order additional parts and accessories, please visit our website: ninjakitchen.com or feel
free to contact customer service: 1-877-646-5288.
Replacement Parts
IMPORTANT: Do not run the appliance over 4 minutes at a time to prevent overheating of the appliance.
* When blending sauces and soups, make sure they’re cooled to room temperature first - Ninja
®
containers are not intended for
hot blending.
BUTTON FUNCTION USE
POWER On/Off Always turn appliance 'Off' when not in use.
1Processing &
Mixing
Use to mix thin batters, gravies and marinades, scramble eggs, puree cooked
foods and uncooked fruits and chop vegetables for dips and salsa.
2Blending
Use to grate hard cheeses, cream soups*, beat dips, grind nuts, thorough
chopping, blend sauces* and spreads. Blend mixed drinks, powdered drinks
or milk shakes.
3
Pureeing,
Liquefying & Ice
Crushing
Use to mix smoothies, frappes, liquefy thick mixtures and blend whole
fruits and vegetables. Crush ice cubes for snow cones, chilled beverages or
frozen slushes.
PULSE
Controlled
Processing &
Bursts of Power
Use to control chopping and processing.
SINGLE SERVE Blending in Nutri
Ninja®Cup Use to mix smoothies, fozen drinks, sauces* or dressings.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Control Panel Lights Are
Blinking, Motor Doesn’t
Start or Blade Assembly
Doesn’t Rotate.
Make sure the pitcher is securely placed on motor base.
Make sure the lid is securely on pitcher in the correct position (align arrows).
The blender is turned 'Off'. Press the power button ( ) to turn 'On'.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Food is Unevenly Chopped. Either you are chopping too much food at one time, you are chopping food with different
textures or the pieces are not of even size. Process smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery. The food has been over processed. Use pulse button for controlled processing.
Food Collects on the Lid or on
the Sides of the Pitcher. The mixture is too thick. Add more liquid.
You Cannot Achieve Snow From
Solid Ice. Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1Separate/remove all parts from each other.
2Hand Washing: Wash the lids, pitcher, Nutri Ninja™cups
and blade assemblies in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
WARNING: Handle the Stacked Blade Assembly
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp. Contact with
the blades’ edges can result in laceration.
3Dishwasher: The pitcher, Nutri Ninja cups, lids, Stacked
Blade Assembly and Nutri Ninja Blade Assembly are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
the blade assembly is removed from the cup or pitcher
before placing in the dishwasher.
4Wipe the motor base clean with a damp cloth .
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
HOW TO STORE
1Store the Ninja®Professional Blender upright with the
pitcher on the motor base, Stacked Blade Assembly
inside the pitcher and lid locked on the pitcher. Do
not place anything on top. Store the Nutri Ninja Blade
Assembly attached to the Nutri Ninja cup and the rest
of the attachments along side the appliance or in a
cabinet where they will not be damaged and won’t
cause a hazard. Insert the power cord into the cord
storage area located in the back of the motor base.
Cord Storage
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3Allow the appliance to cool for approximately 15
minutes.
4Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

13 14
ninjakitchen.com1-877-646-5288
Notes
PRODUCT REGISTRATION
Please visit ninjakitchen.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of purchase.
You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Ninja is a registered trademark of SharkNinja Operating LLC.
Nutri Ninja is a trademark of SharkNinja Operating LLC.
Ninja est une marques déposée de SharkNinja Operating LLC.
Nutri Ninja est une marque de commerce de SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.
Les illustrations peuvent différer du produit réel. Nous nous efforçons sans cesse d’améliorer
nos produits et, de ce fait, les spécifications décrites dans ce guide sont sujettes à des
changements sans préavis.
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents.
Pour des renseignements sur les brevets de SharkNinja aux É.-U., veuillez visiter
sharkninja.com/USPatents.
© 2015 SharkNinja Operating LLC
BL663CO_30_E_IB_151106_2
PRINTED IN CHINA / IMPRIMÉ EN CHINE

3.
Align arrows on lid
and handle, then
lower handle to lock
in place.
1.
Place pitcher on
base and turn
clockwise to
lock in place.
2.
Holding the blade
assembly by the top
of the shaft, insert it
into the pitcher.
STACKED BLADE ASSEMBLY
Please make sure to read your Ninja Owner’s Guide in addition to this instruction sheet.
WARNING: Blades are sharp and not locked in place. Make sure lid is locked onto the
pitcher before pouring. If pouring without lid, ALWAYS remove blades first. Failure
to do so will result in a laceration risk. Refer to the Ninja Owner’s Guide for additional
information.
ASSEMBLY
QUESTIONS? We’re here to help. Call 1-877-646-5288 or visit www.ninjakitchen.com
CLEANING
Hand washing: Wash the lid, pitcher and blade assembly in
warm, soapy water. When washing the blade assembly, use
a dish washing utensil with a handle to avoid direct hand
contact with blades. Handle blade assembly with care to
avoid contact with sharp edges, rinse and air dry thoroughly.
WARNING: Handle the Stacked Blade Assembly with
care when washing, as the blades are sharp. Contact with
the blade’s edge can result in laceration.
Dishwasher: The pitcher, lid and Stacked Blade Assembly
are all dishwasher safe. It is recommended that the lid and
blade assembly be placed on the top rack. Ensure that the
blade assembly is removed from the pitcher before placing
in the dishwasher.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid is
fully locked onto the
blender pitcher. Failure
to do so will result in a
risk of laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked Blade
Assembly first holding it
by the shaft. Failure to do
so will result in a risk of
laceration.

3.
Alignez les flèches sur le
couvercle et la poignée,
puis abaissez la poignée
pour verrouiller en place.
1.
Placez le mélangeur sur
la base et en le tournant
dans le sens horaire pour
le verrouiller en place.
2.
Insérez le jeu de lames
superposées dans le
pichet en tenant la tige
par le bout.
JEU DE LAMES
SUPERPOSÉES
S'il vous plaît, assurez-vous de lire votre guide du propriétaire Ninja en plus de ce feuillet d'instructions.
AVERTISSEMENT : Les lames sont tranchantes et ne sont pas verrouillées en
place. Vérifiez que le couvercle est fixé au pichet avant de verser. Si vous versez
sans le couvercle, enlevez TOUJOURS les lames avant de le faire. Ne pas procéder
de la sorte augmente le risque de lacération. Consultez le guide d’utilisateur du
mélangeur Ninja pour obtenir de plus amples renseignements.
ASSEMBLAGE
DES QUESTIONS? Nous sommes là pour vous aider.
Composez le 1 877 646-5288 ou visitez ninjakitchen.com.
NETTOYAGE
Nettoyage à la main : Lavez les couvercles, le pichet et
le jeu de lames à l’eau savonneuse tiède. Lavez le jeu de
lames avec une brosse à vaisselle munie d’une poignée pour
éviter tout contact direct avec les lames. Manioulez le jeu
de lames avec soin pour éviter tout contact avec des bords
tranchants, rincez-le et laissez-le sécher entièrement.
AVERTISSEMENT : Le jeu de lames superposées est
coupant; manipulez-le avec soin lorsque vous le lavez.
Le contact avec les lames peut causer des lacérations.
Lave-vaisselle : Le pichet, le couvercle et le jeu de lames
superposées peuvent être mis au lave-vaisselle. Nous vous
recommandons de placer le couvercle et le jeu de lames
dans le panier supérieur. Retirez le jeu de lames du pichet
avant de le mettre au lave-vaisselle.
AVERTISSEMENT : Les lames
superposées sont coupantes et
la tige n’est pas verrouillée en
place. Si vous vous servez
du bec verseur, assurez-
vous que le couvercle est
bien verrouillé en place
sur le pichet-mélangeur.
Ne pas procéder de la
sorte augmente le risque
de lacération.
AVERTISSEMENT : Les lames
superposées sont coupantes
et la tige n’est pas verrouillée
en place. Pour verser sans le
couvercle, retirez d’abord
le jeu de lames super-
posées avec précaution,
en le tenant par la tige.
Ne pas procéder de la sorte
augmente le risque de lacération.
MD

WARNING
Open with care.
Contains loose,
SHARP blades.
WARNING
Open with care.
Contains loose,
SHARP blades.
AVERTISSEMENT
Ouvrir avec prudence.
Contient des lames mobiles
et TRANCHANTES.
AVERTISSEMENT
Ouvrir avec prudence.
Contient des lames mobiles
et TRANCHANTES.
TOP
WARNING
Open with care.
Contains loose,
SHARP blades.
TOP HAUT
TOP HAUT
TOP
WARNING
Open with care.
Contains loose,
SHARP blades.
HAUT
AVERTISSEMENT
Ouvrir avec prudence.
Contient des lames mobiles
et TRANCHANTES.
HAUT
AVERTISSEMENT
Ouvrir avec prudence.
Contient des lames mobiles
et TRANCHANTES.
WARNING
Contains loose,
SHARP blades.
Open band from
top end.
AVERTISSEMENT
Contient des lames
mobiles et TRANCHANTES.
Ouvrir la bande par le haut.
WARNING
Contains loose,
SHARP blades.
Open band from
top end.
AVERTISSEMENT
Contient des lames
mobiles et TRANCHANTES.
Ouvrir la bande par le haut.
WARNING
Contains loose,
SHARP blades.
Open band from
top end.
AVERTISSEMENT
Contient des lames mobiles
et TRANCHANTES.
Ouvrir la bande par le haut.
PITCHER WRAP
PITCHER INSERT