Ninja BL770REF User manual

Mega Kitchen System®
®BL770REF
OWNER’S GUIDE
www.ninjakitchen.com
1 877 646-5288

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NINJA®MEGA KITCHEN
SYSTEM®.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a polarized
plug (one blade is wider than the other). This
plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. DO NOT modify the plug in
any way.
WARNING: Extension cords are
not recommended for use with this product.
WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY:
1WARNING: Remove utensils prior to
processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.
2WARNING: Stacked Blade Assembly
and Chopping Blade Assembly are
sharp, not locked in place and
removable, handle with care. When
handling the Stacked Blade Assembly
or the Chopping Blade, always hold it
by the shaft. Failure to do so will result
in a risk of laceration.
3WARNING: Stacked Blade Assembly
is sharp and not locked in place. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, carefully remove
the Stacked Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
4WARNING: Chopping Blade Assembly
is sharp and not locked in place. Make
sure to carefully remove lid and
Chopping Blade Assembly, holding it by
the shaft, before emptying contents.
Failure to do so will result in a risk of
laceration.
5CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.
6CAUTION: We do not recommend
grinding in any of our Nutri Ninja®Cups.
7CAUTION: Remove the Nutri Ninja
Blade Assembly from the cup upon
completion of blending. Some
ingredients have the potential to
THIS BOOK COVERS MODEL NUMBERS:
BL770REF
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1500 Watts
Pitcher Capacity: 72 ounces (9 cups, 2.15 L)
MAX Liquid Capacity: 64 ounces (8 cups, 1.9 L)
Bowl Capacity: 64 ounces (8 cups, 1.8 L)
Nutri Ninja®Cup Capacity: 16 ounces (2 cups, 470ml)

2
www.ninjakitchen.com
20 DO NOT use the appliance if blade
assemblies are bent or damaged.
21 To reduce risk of injury, never place the blade
assemblies on base without pitcher, bowl or
Nutri Ninja®cup properly attached.
22 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
23 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
24 DO NOT remove the container from the
motor base while the appliance is in
operation.
25 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
26 DO NOT expose containers to extreme
temperature changes.
27 DO NOT overfill.
28 DO NOT operate the appliance empty.
29 If the appliance overheats, a thermal switch
will become activated and shut off the
motor. To reset, unplug the appliance and let
it cool down for approximately 15 minutes
before using again.
30 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
31 The maximum rating is based on the Stacked
Blade Assembly (pitcher) that drives the
greatest power and other recommended
attachments may draw significantly less
power or current.
SAVE THESE
INSTRUCTIONS
expand after blending resulting in
excessive pressure buildup that can
pose a risk of injury.
8 To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
9 DO NOT allow the appliance to be used by
children. Close attention is necessary when
used near children. This is not a toy.
10 Never leave an appliance unattended when
inuse.
11 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
12 Turn the appliance Off and remove the power
cord from the electrical outlet when not in
use, before assembling or disassembling
parts and before cleaning. To unplug, grasp
the plug and pull from the electrical outlet.
Never pull from the power cord.
13 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
14 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
15 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
16 Always use appliance on a dry, level surface.
17 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
18 Avoid contact with moving parts.
19 DO NOT attempt to sharpen blades.

31-877-646-5288
Contents
Thank you for
purchasing
the Ninja®
Mega Kitchen
System®.
Getting to Know Your Ninja®Mega Kitchen System®....................................................4
Before First Use ........................................................................................................5
Assembly and Use for the Blender Pitcher ..................................................................6
Assembly and Use for the Nutri Ninja®Cup.................................................................8
Assembly and Use for the Food Processor Bowl ..........................................................9
Speed Setting & Uses..............................................................................................11
Care & Maintenance ...............................................................................................12
Troubleshooting Guide.............................................................................................13
Replacement Parts..................................................................................................13
Warranty & Registration...........................................................................................14
FEATURES:
• Patented Ninja®Technology
• Extra Large, 72 oz. Blender Pitcher (MAX Liquid Capacity: 64 oz.) - BPA Free
• 64 oz. Food Processor Bowl with Drizzle Hole Lid - BPA Free
• Nutri Ninja®Cups - BPA Free
• Lock–In Lid, Featuring Pour Spout
• Easy to Clean Electronic Control Panel
• Sturdy, Non-Slip Base

4
www.ninjakitchen.com
d64 oz. Food Processor Bowl
eBowl Lid with Locking Handle
fDough Blade Assembly (bowl)
gChopping Blade Assembly (bowl)
a16 oz. Nutri Ninja®Cup (x2)
bTo-Go Lid (x2)
cNutri Ninja Blade Assembly
NOTE: Blade Assemblies are not interchangeable.
Getting To Know Your Ninja®Mega Kitchen System®
a
d
e
bc
fg
h
i
k
j
h72 oz. Blender Pitcher
iPitcher Lid with Locking Handle
jStacked Blade Assembly (pitcher)
kMotor Base
lPower Cord (not shown)

51-877-646-5288
Before First Use
CAUTION: Do not immerse the motor base
into water or any other liquid.
1Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2Wash the lids, pitcher, bowl, Nutri Ninja®cups and
Blade Assemblies in warm, soapy water. When washing
the blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the Stacked Blade Assembly,
Chopping Blade Assembly and Nutri Ninja Blade
Assembly with care when washing, as the blades
are sharp.
3Rinse and air dry thoroughly.
4 The pitcher, bowl, Nutri Ninja®cups, lids, Stacked
Blade Assembly, Chopping Blade Assembly and Nutri
Ninja Blade Assembly, are all dishwasher safe. It is
recommended that the lids and Blade Assemblies be
placed on the top rack. Ensure that the Blade Assemblies
are removed from the containers before placing in the
dishwasher.
5Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the attachment in
first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
blender pitcher. Failure
to do so will result in a
risk of laceration.
WARNING: Stacked
Blade Assembly
and Chopping Blade
Assembly are sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly
or Chopping Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.

6
www.ninjakitchen.com
Fig. 3bFig. 1
Assembly and Use for the Blender Pitcher
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3Align and lower the Pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the right of
the “LOCK” symbol on the motor base.
4Rotate the blender pitcher clockwise until it clicks in
place. As the pitcher rotates, it will lower and the safety
tabs on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
5The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 ounces) on the pitcher.
8Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the pitcher and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
9Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow ( )
located on the lid with the arrow ( ) located on the
pitcher’s handle. (Fig. 5) Press the handle down until
you hear a click.
Fig. 4 Fig. 5
ASSEMBLY
Fig. 3a
Fig. 2
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
OR
It’s best to add the liquid ingredients first and then the dry ingredients.

71-877-646-5288
10 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
12 To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base. (Fig. 7, Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
13 Open the pour spout cap and use the spout to empty
liquid contents.
CAUTION: Stacked Blade Assembly is not locked
in place. If using the pour spout, ensure the lid is
fully locked onto the blender pitcher.
Assembly and Use for the Blender Pitcher - cont.
Fig. 7
USE REMOVAL
Fig. 6 Fig. 8
14 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.
15 Make sure that the unit is unplugged when not in use.
16 To release the motor base from the counter or table
top, place your hands underneath both sides of the
motor base and gently pull the unit up and towards you.
(Fig. 9 )
Fig. 9
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.

8
www.ninjakitchen.com
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3Add ingredients to the Nutri Ninja®cup.
4Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5Turn the Nutri Ninja®cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja®cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2) Turn the power button on, the single
serve button will illuminate.
6Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
7Once you have reached your desired consistency,
turn the power button off. Turn the Nutri Ninja®cup
counter clockwise and pull straight up to remove.
(Fig. 4, Fig. 5)
Fig. 2
Assembly and Use for the Nutri Ninja®Cup
Fig. 3 Fig. 4 Fig. 5
ASSEMBLY USE REMOVAL
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
8Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting it counterclockwise.
9Place the To-Go drinking lid onto the Nutri Ninja®cup,
twist to seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
11 To release the motor base from
the counter or table top, place
your hands underneath both sides
of the motor base and gently
pull the unit up and towards you.
(Fig. 6)
NOTE: To order additional Nutri Ninja®Cups, please
visit our website: www.ninjakitchen.com or feel free
to contact customer service: 1-877-646-5288.
Fig. 1
For best results, use short “PULSES”... Practice makes perfect!!
Fig. 6
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.

91-877-646-5288
Assembly and Use for the Food Processor Bowl
ASSEMBLY
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top.
3Align and lower the Bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the
“LOCK” symbol on the motor base.
4 Rotate the bowl clockwise to lock into place. You will
hear a click when the lock is engaged. (Fig. 2)
5The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6Holding the desired Blade Assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the Blade Assembly is seated properly and
is standing upright. (Fig. 4)
NOTE: The Blade Assembly will fit loosely on the drive
gear.
7 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl’s handle. (Fig. 5) Press the handle down until you
hear a click.
NOTE: The 64 oz. bowl is not intended for
blending drinks. Do not overfill.
NOTE: To add liquids during processing,
open the drizzle hole on the top of the
lid and pour the liquid slowly into the
mixture.
9Plug the power cord into the electrical
outlet and press the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
Fig. 4 Fig. 5Fig. 1
Fig. 3a
Fig. 3bFig. 2
WARNING: Chopping Blade Assembly is sharp and not locked in place. Make sure to carefully remove lid and Chopping
Blade Assembly, holding it by the shaft, before emptying contents. Failure to do so will result in a risk of laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter,
which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being
burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential to expand
after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use

10
www.ninjakitchen.com
REMOVAL USE
Fig. 5
USE
Fig. 1 Fig. 2 Fig. 3 Fig. 4a
Suction
Lever
Fig. 4b
OR
USING THE CHOPPING BLADE ASSEMBLY
WARNING: Never leave the appliance unattended while
in use.
WARNING: Remove utensils prior to processing.
1Review warning and caution statements on p. 9 before
proceeding to number 2.
2Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade assembly fits around the gear shaft
and that it is standing straight.
3 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
4Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ™Pulse
button until your desired consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
5When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Chopping Blade assembly to stop turning.
(Fig. 2)
6To remove the lid, press the release button on the lid
and pull the lid handle up to a 90°angle. (Fig. 2)
7Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
8To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 4)
USING THE DOUGH BLADE ASSEMBLY
WARNING: Never leave the appliance unattended while
in use.
WARNING: Remove utensils prior to processing.
1Review warning and caution statements on p. 9 before
proceeding to number 2.
2Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the
Dough Blade assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)
3Add the ingredients and secure the bowl lid onto the bowl.
4Plug the power cord into the electrical outlet and press
on the power button ( ). Select LOW/DOUGH on the
control panel and process until ingredients come
together to form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
5Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the Dough
Blade assembly to stop turning.
6To remove the lid, press the release button on the lid
and pull the lid handle up to a 90°angle. (Fig. 2)
7Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
8To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)

11 1-877-646-5288
FUNCTION CONTAINER ATTACHMENT SPEED
BUTTON TYPE OF FOOD
Nutri Ninja®Blending Nutri Ninja®Cup Nutri Ninja Blade
Assembly Single Serve
Smoothies
Frappes
Milk Shakes
Mincing Nutri Ninja®Cup Nutri Ninja Blade
Assembly Single Serve
Onion
Garlic
Herbs
Kneading Bowl Dough Blade Assembly 1
Bread dough
Pie dough
Pizza dough
Pretzel dough
Dough Mixing Bowl Dough Blade Assembly 1Cookie dough
Processing Pitcher/Bowl
Nutri Ninja®Cup
Stacked Blade Assembly
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
2
Pulse
Single Serve
Pâtés
Stewed fruits
Dips
Apple sauce
Spreads
Soups*
Baby food
Emulsifying Bowl Chopping Blade
Assembly 2
Salad Dressings
Dips
Sauces*
Grinding Bowl Chopping Blade
Assembly 2Meat
Grating Bowl
Nutri Ninja®Cup
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
3 or Pulse
Single Serve
Grated cheese
Bread crumbs
Spices
Chopping
Bowl
Nutri Ninja®Cup
Pitcher
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Pulse
Single Serve
3
Salsa
Vegetables
Nuts
Mixing Bowl Dough Blade Assembly 1Light cake mixes
Batters
Ice Crushing Pitcher
Nutri Ninja®Cup
Stacked Blade Assembly
Nutri Ninja Blade
Assembly
3
Single Serve Ice
Pureeing Pitcher
Nutri Ninja®Cup
Stacked Blade Assembly
Nutri Ninja Blade
Assembly
3
Single Serve
Smoothies
Smooth soups
Milkshakes
Speed Setting & Uses
* When blending sauces and soups, make sure they’re cooled to room temperature first - Ninja
®
containers are not intended for
hot blending.

12
www.ninjakitchen.com
Care & Maintenance
HOW TO STORE
1Store the Ninja®Mega Kitchen System®upright with
the pitcher on the motor base, Stacked Blade Assembly
inside the pitcher and lid locked on the pitcher. Do not
place anything on top. Store the Food Processor Bowl
with the Chopping Blade Assembly inside and the lid
locked on the bowl. Store the Nutri Ninja®cup with the
Nutri Ninja Blade Assembly attached to the cup and
all other attachments along side the appliance or in
a cabinet where they will not be damaged and won’t
cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja®Mega Kitchen System®features a unique
safety system which prevents damage to the unit’s
motor and drive system should you inadvertently
overload your appliance. If the appliance is being
overloaded, the motor will stop. Allow the
appliance to cool for approximately 15 minutes.
To reset the appliance, follow the resetting procedure
below:
1Unplug the appliance from the electrical outlet.
2Remove and empty the container and ensure that no
food is jamming the Blade Assembly.
3Allow the appliance to cool for approximately 15
minutes.
4Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1Separate/remove all parts from each other.
2Hand Washing: Wash the lids, pitcher, bowl, Nutri
Ninja™cups and blade assemblies in warm, soapy
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades. Handle blade assemblies with care
to avoid contact with sharp edges. Rinse and air dry
thoroughly.
WARNING: Handle the Stacked Blade Assembly,
Chopping Blade Assembly and Nutri Ninja Blade
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3Dishwasher: The pitcher, bowl, Nutri Ninja cups, lids,
Stacked Blade Assembly, Chopping Blade Assembly
and Nutri Ninja Blade Assembly are all dishwasher safe.
It is recommended that the lids and blade assemblies
be placed on the top rack. Ensure the blade assembly is
removed from the cup, bowl or pitcher before placing in
the dishwasher.
4Wipe the motor base clean with a damp cloth .
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.

13 1-877-646-5288
Troubleshooting Guide
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.
Make sure the container is securely locked on the motor base.
Make sure the lid is securely on the container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated or overloaded. Unplug and wait approximately 15
minutes before usingagain.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped. Either you are chopping too much food at one time, or the pieces are not of even
size and processing smaller amounts per batch.
Food is Chopped Too Fine or
is Too Watery. The food has been over processed. Use pulse button for controlled processing.
Food Collects On Lid or On
the Sides of the Container. The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice straight
from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to
Counter or Table Top.
Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood,
tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a surface that
is not secure, (cutting board, platter, plates, etc.).

14
www.ninjakitchen.com
PRODUCT REGISTRATION
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
NINETY (90) DAY REFURBISHED PRODUCT LIMITED
WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of ninety
(90) days from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely, at our option, to either: 1) the cost of the repair or replacement of
the unit with a refurbished unit; or 2) an upgrade to a similar model refurbished unit of equal or greater value. Replacement
units/parts will be warranted for the remaining portion of the original (90) ninety day warranty period
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by accident, misuse, abuse, negligent
handling, incorrect voltage, vandalism, unsuitable environments, damage due to faulty packaging or mishandling in transit,
natural disasters or other damages beyond SharkNinja Operating LLC’s control. This Limited Warranty does not cover
damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any
of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC. Since this unit
has been represented and sold as a refurbished item, this Limited Warranty does not apply to cosmetic damages or defects,
including, but not limited to, scratches, scuffs, dents, or dings. Operating the unit in violation of the instructions in the owner’s
manual will void the warranty terms.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support and product specialists, call 1-877-646-5288 or visit our website ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it as set out in the second paragraph above free of charge. Proof of purchase date and a check made
payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be
included.*
This Limited Warranty is extended to the original purchaser of this refurbished unit and excludes all other legal, implied and/or
conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly
assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or
consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental
or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you
insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your
package “ATTENTION CUSTOMER SERVICE”.

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Mega Kitchen System, Ninja and Nutri Ninja, are registered trademarks of
SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.
For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.
© 2015 SharkNinja Operating LLC
BL770REF_30_IB_ENG_151109_1
PRINTED IN CHINA