Ninja BL780C User manual

®
BL780C
www.ninjakitchen.com
® ®
HELP
LINE
1 877 646-5288
LIGNE
D’ASSISTANCE
1 877 646-5288

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA®SUPRA KITCHEN SYSTEM™.
POLARIZED PLUG
WARNING: To reduce the risk of electric
shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit
into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. DO NOT
modify the plug in any way.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY:
1. To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
2. DO NOT allow young children to operate the
appliance or use as a toy. Close supervision is
necessary when any appliance is used by or
near children.
3. Never leave an appliance unattended when in use.
4. Turn the appliance Off and remove the power
cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.
5. DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
6. DO NOT operate any appliance with a damaged
cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to EURO-PRO Operating LLC for
examination, repair or adjustment.
7. DO NOT let the power cord hang over the edge
of table or counter or touch hot surfaces such as
the stove.
8. Always use appliance on a dry, level surface.

www.ninjakitchen.com 2
English
9. Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to the
appliance. A scraper may be used but only when
the appliance is not running.
10. CAUTION: Blade assembly is sharp, handle
with care. When handling the blade
assembly, always hold by the shaft.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen blades.
13. DO NOT use the appliance if blade assembly is
bent or damaged.
14. To reduce risk of injury, never place the blade
assembly on base without pitcher or bowl
properly attached.
15. DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
16. The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
17. DO NOT remove the container from the motor
base while the appliance is in operation.
18. To reduce the risk of injury, NEVER operate the
appliance without the lid in place; DO NOT try
to defeat the interlock mechanism; make sure
that the attachment is properly installed before
operating the appliance.
19. DO NOT expose containers to extreme
temperature changes.
20. CAUTION: DO NOT BLEND HOT LIQUIDS.
21. DO NOT overfill.
22. Extreme caution must be used when moving
an appliance containing hot food, water or
otherliquids.
23. DO NOT operate the appliance empty.
24. To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
25. If the appliance overheats, a thermal switch will
become activated and shut off the motor. To
reset, unplug the appliance and let it cool down
for approximately 15 minutes before using again.
26. In the event that the unit overloads, the control
panel lights will flash and the unit will shut down.
Unplug the unit and wait 15 minutes to reset.
27. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
28. The maximum rating is based on the Total
Crushing™Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less power or
current.
WARNING: Extension cords are not
recommended for use with this product.
SAVE THESE
INSTRUCTIONS

31-877-646-5288
MESURES DE SÉCURITÉ IMPORTANTES
Pour usages domestiques seulement
LORS DE L’USAGE D’UN APPAREIL
ÉLECTRIQUE, DES MESURES DE SÉCURITÉ
ÉLÉMENTAIRES DEVRAIENT TOUJOURS
ÊTRE RESPECTÉES, Y COMPRIS LES
MESURES SUIVANTES :
LISEZ TOUTES LES INSTRUCTIONS AVANT
D’UTILISER VOTRE MÉLANGEUR NINJAMD
SUPRA KITCHEN SYSTEMMC.
FICHE POLARISÉE
AVERTISSEMENT : Afin de réduire les
risques d’électrocution, cet appareil a été muni
d’une fiche polarisée (une broche est plus large
que l’autre). Cette fiche ne peut être insérée que
d’un seul côté dans une prise polarisée. Si la
fiche ne s’insère pas complètement dans la prise
de courant, inversez la fiche. Si elle ne s’adapte
toujours pas, contactez un électricien compétent
afin d’installer la prise murale appropriée.
N’altérez la fiche d’AUCUNE façon.
AVERTISSEMENT :
POUR RÉDUIRE LE RISQUE D’INCENDIE,
D’ÉLECTROCUTION ET DE BLESSURES :
1. Pour éviter les risques d’électrocution,
n’immergez pas l’appareil et assurez-vous que
le cordon d’alimentation n’entre pas en contact
avec l’eau ou un autre liquide.
2. NE permettez PAS aux jeunes enfants d’utiliser
l’appareil ou de s’en servir comme jouet. Une
surveillance attentive est nécessaire lors de
l’emploi par des enfants ou à proximité de ceux-ci.
3. Ne laissez jamais l’appareil sans surveillance
pendant l’utilisation.
4. Veuillez éteindre l’appareil et débrancher le
cordon d’alimentation de la prise de courant
lorsque l’appareil n’est pas utilisé et avant le
nettoyage, l’assemblage ou le démontage des
pièces. Pour débrancher l’appareil, tirez sur la
fiche et retirez-la de la prise d’alimentation. Ne
tirez jamais sur le cordon.
5. PRENEZ SOIN du cordon d’alimentation. Ne
transportez jamais l’appareil en le tenant par
le cordon. Ne débranchez jamais l’appareil de
l’alimentation électrique en tirant sur le cordon.
Agrippez plutôt la fiche et tirez dessus pour
ladébrancher.
6. N’utilisez PAS l’appareil si sa fiche ou son cordon
est endommagé, s’il a fait défaut ou s’il a été
échappé ou endommagé. Cet appareil ne contient
aucune pièce pouvant être réparée par l’utilisateur.
Retournez l’appareil à EURO-PRO Operating LLC
pour vérification, réparation ou réglage.
7. NE laissez PAS le cordon dépasser d’une table
ou d’un comptoir. Ne le laissez pas entrer en
contact avec des surfaces chaudes, comme la
cuisinière.
8. Posez toujours l’appareil sur une surface sèche
et de niveau.

www.ninjakitchen.com 4
Français
9. Afin de réduire le risque de blessures graves ou
de dommages à l’appareil, gardez les mains, les
cheveux, les vêtements et les ustensiles hors
du récipient pendant l’utilisation. Vous pouvez
utiliser une raclette, mais seulement lorsque le
mélangeur est éteint
10. MISE EN GARDE : Les lames sont
tranchantes. Manipulez-les avec soin.
Lorsque vous manipulez un jeu de lames,
tenez l’arbre de cette pièce.
11. Évitez tout contact avec les pièces en mouvement.
12. NE tentez PAS d’affûter les lames.
13. N’utilisez PAS l’appareil si l’un des jeux de
lames est tordu ou endommagé.
14. Afin de réduire les risques de blessures, ne
placez jamais le jeu de lames sur le bloc-moteur
sans y avoir bien fixé le pichet ou le bol.
15. N’utilisez PAS cet appareil sur une surface
chaude ou près de celle-ci (brûleur à gaz, plaque
électrique ou four chaud).
16. L’utilisation d’accessoires non recommandés par
le fabricant, y compris des bocaux de conserve,
peut causer un incendie ou des blessures, ou
entraîner l’électrocution.
17. NE retirez PAS le récipient du bloc-moteur
lorsque l’appareil est en marche.
18. Pour réduire le risque de blessure, n’allumez
JAMAIS l’appareil sans d’abord mettre
le couvercle en place; NE tentez PAS de
contourner ou de désactiver le mécanisme de
verrouillage. Lorsque vous utilisez un jeu de
lames ou un accessoire, assurez-vous que celui-
ci est bien installé avant d’utiliser l’appareil.
19. N’exposez PAS les récipients à des
changements de température extrêmes.
20. MISE EN GARDE : NE MÉLANGEZ PAS DE
LIQUIDES CHAUDS.
21. NE remplissez PAS excessivement le récipient.
22. Soyez extrêmement prudent lorsque vous
déplacez un appareil contenant des aliments, de
l’eau ou d’autres liquides chauds.
23. NE faites PAS fonctionner l’appareil à vide.
24. Pour réduire les risques de brûlures, laisser
toujours refroidir l’appareil avant de démonter les
pièces et de nettoyer l’appareil.
25. En cas de surchauffe de l’appareil, le disjoncteur
thermique coupe le moteur. Pour le réinitialiser,
débranchez l’appareil et laissez-le refroidir pendant
environ 15 minutes avant de l’utiliser de nouveau.
26. En cas de surcharge de l’appareil, les témoins du
panneau de commande clignoteront et l’appareil
s’éteindra. Débranchez l’appareil et attendez 15
minutes pour qu’il se réinitialise.
27. CET APPAREIL EST CONÇU POUR UN USAGE
DOMESTIQUE SEULEMENT. N’utilisez l’appareil
qu’aux fins pour lesquelles il est prévu. N’utilisez
pas cet appareil à l’extérieur.
28. La puissance maximale correspond à l’utilisation
du récipient à six lames (pichet), qui requiert la
plus grande puissance. D’autres accessoires
recommandés par le fabricant peuvent nécessiter
une puissance ou un courant nettement inférieur(e).
AVERTISSEMENT : Il n’est pas
recommandé d’utiliser des rallonges électriques
pour brancher cet appareil.
VEUILLEZ
CONSERVER CES
DIRECTIVES

51-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL780C 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1200 Watts
Pitcher Capacity: 9 cups, 2.15 L
Bowl Capacity: 8 cups, 1.8 L
Nutri Ninja™Capacity: 2 cups, 0.47 L
Euro-Pro, Nutri Ninja, Total Crushing and Ninja are
trademarks of Euro-Pro Operating LLC.
CE MANUEL CONCERNE LE MODÈLE :
BL780C 30
SPÉCIFICATIONS TECHNIQUES
Tension : 120V., 60Hz.
Intensité : 1200 Watts
Capacité du récipient : 9 tasses, 2.15 L
Capacité du bol : 8 tasses, 1.8 L
Capacité du gobelet
à portion individuelle : 2 tasses, 0.47 L
Euro-Pro, Nutri Ninja, Total Crushing et Ninja sont des marques de
commerce de Euro-Pro Operating LLC.

www.ninjakitchen.com 6
English
Contents
Thank you for
purchasing
the Ninja®
Supra Kitchen
System™.
Getting to Know Your Ninja® Supra Kitchen System™...................................................... 7
Using the Ninja®Supra Kitchen System™...................................................................... 9
Assembly and Use for the 2.15 L Pitcher.......................................................................... 10
Assembly and Use for the Nutri Ninja™Cup ...................................................................... 12
Assembly and Use for the 1.8 L Bowl............................................................................... 13
Speed Setting & Uses...................................................................................................... 15
Care & Maintenance ....................................................................................................... 16
Troubleshooting Guide..................................................................................................... 17
Replacement Parts.......................................................................................................... 17
Warranty & Registration................................................................................................... 18
Table des matières
Merci d’avoir
acheté le
mélangeur
NinjaMD Supra
Kitchen
SystemMC.
Familiarisez-vous avec votre mélangeur NinjaMD Supra Kitchen SystemMC ...................... 19
Utilisation du mélangeur NinjaMD Supra Kitchen SystemMC ............................................. 21
Assemblage et utilisation du pichet de 2,15 L................................................................... 23
Assemblage et utilisation du tasse Nutri NinjaMC ................................................................ 24
Assemblage et utilisation du bol de 1,8 L ........................................................................ 25
Réglages de vitesse et utilisations.................................................................................... 27
Soins et entretien............................................................................................................ 28
Guide de dépannage....................................................................................................... 29
Pièces de rechange......................................................................................................... 29
Garantie et enregistrement .............................................................................................. 30
Français

71-877-646-5288
h1.8 L Bowl
i2.15 L Pitcher
j Gear Shaft
kNutri Ninja™Blade
l Motor Base
mPower Cord (not shown)
aNutri Ninja™To-Go Lid (x2)
bBowl Lid with Locking Handle
cPitcher Lid with Locking Handle
d 4-Blade Assembly (bowl)
eNutri Ninja™Cup (x2)
fDough Blade (bowl)
gTotal Crushing™Blade Assembly (pitcher)
NOTE: Attachments are not interchangeable.
Getting To Know Your Ninja®Supra Kitchen System™
a
d
e
b
c
f
g
h
i
k
j
l

www.ninjakitchen.com 8
English
The Ninja®Supra Kitchen System™is a professional, high powered innovative tool with a sleek design and
outstanding performance, a true asset to any kitchen. It is perfect for ice crushing, blending, food processing, and
complete juicing. The Ninja®Supra Kitchen System™also features a unique capability to knead dough for pizzas,
breads, pretzels and cookies! Create all of your favorite recipes fast and easy with just one touch of a button. For best
results, be sure to carefully read all the instructions contained in the manual before using this appliance.
FEATURES:
• Total Crushing™Technology
• Extra Large, 2.15 L Pitcher - BPA Free
• 1.8 L Bowl - BPA Free
• Nutri Ninja™Cup - BPA Free
• Lock–In Lid, Featuring Pour Spout
• Easy to Clean Electronic Control Panel
• Sturdy, Non-Slip Base
• Hidden Drain Holes - prevent water build up from dishwasher

91-877-646-5288
Using the Ninja®Supra Kitchen System™
BEFORE FIRST USE
1 Remove all packaging material and labels from the
appliance.
2Wash the lids, pitcher, bowl, Nutri Ninja™cups and
attachments in warm, soapy water with a soft cloth.
Use caution when washing the blade assemblies as the
blades are very sharp.
3Rinse and dry thoroughly.
4The pitcher, bowl, Nutri Ninja™cups, lids and
attachments, are all dishwasher safe. It is
recommended that the lids and attachments be placed
on the top rack. Ensure that the attachments are
removed from the containers before placing in the
dishwasher.
5Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Never add ingredients into the
container before placing the attachment in first.
IMPORTANT: Attachments are not
interchangeable.
CAUTION: Blades are sharp! Use extreme caution
when handling the blade assemblies. Always hold
them by the shaft.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
CAUTION: Use extreme caution when processing
hot foods to avoid accidental scalding or burns. Do
not process food that is hotter than 180°F/82°C.
Allow very hot ingredients to cool before
processing.
WARNING: Secure the appliance while in use by
pressing down on the lid with one hand.
CAUTION: Never remove the container while the
appliance is still running.
WARNING: Never leave the appliance unattended
while in use.

www.ninjakitchen.com 10
English
Assembly and Use for the 2.15 L Pitcher
IMPORTANT: Make sure that the motor base is plugged
in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Pitcher onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the “ LOCK ”
symbol on the motor base.
3 Rotate the pitcher clockwise as far as it will go to lock in
place. (Fig. 2)
4 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner.
(Fig. 3a, Fig. 3b)
5
Holding the Total Crushing
™
Blade Assembly by the top of
the shaft, place it onto the drive gear inside the pitcher.
Ensure that the attachment is seated properly and is
standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6 Add the ingredients to the pitcher, making sure that they
do not exceed the highest measured marking line on the
side of the pitcher.
NOTE: If you need to add additional ingredients while the
appliance is processing, open the pour spout cap and
pour the ingredients in through the opening.
7 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the pitcher and lid
are not installed correctly. When the pitcher and lid are
installed properly, the power button ( ) will be solid,
indicating that the appliance is ready for use.
8 Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the arrow ( ) located on
the lid with the arrow ( ) located on the pitcher’s handle.
(Fig. 5) Press the handle down until you hear a click.
Fig. 3b
Fig. 2
Fig. 1 Fig. 4
Fig. 5
Assembly
Fig. 3a

11 1-877-646-5288
WARNING: Never leave the appliance unattended while
in use.
9Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
10 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the attachment to stop turning. (Fig. 7)
11 To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base. (Fig. 7, Fig. 8)
Assembly and Use for the 2.15 L Pitcher - cont.
Fig. 7
USE REMOVAL
Fig. 6 Fig. 8
CAUTION: Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge food
that has stuck to the sides of the pitcher.
12 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents. For thicker consistencies,
remove the lid and attachment carefully (by its shaft),
then empty contents from the container.
13 Make sure that the unit is unplugged when not in use.

www.ninjakitchen.com 12
English
WARNING: Never leave the appliance unattended
while in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1Place the motor base on a clean, dry, level surface
such as a counter or table top.
2Add ingredients to the Nutri Ninja™cup.
3Place the Nutri Ninja™blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
4 Turn the Nutri Ninja™cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja™cup clockwise.
(Fig. 2) Turn the power button on, the Nutri Ninja™
button will illuminate.
5Press down on the Nutri Ninja™button in short intervals
to activate. (Fig. 3)
Assembly and Use for the Nutri Ninja™Cup
6 Once you have reached your desired consistency, turn
the power button off. Turn the Nutri Ninja™cup counter
clockwise and pull straight up to remove. (Fig. 4, Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
7Turn the cup upright and remove the Nutri Ninja™blade
by twisting the blade assembly clockwise.
8Place the To-Go drinking lid onto the Nutri Ninja™cup,
twist to seal and enjoy!
9Make sure that the motor base is unplugged when not
in use.
NOTE: To order additional Nutri Ninja™Cups, please
visit our website: www.ninjakitchen.com or feel free to
contact customer service: 1-877-646-5288.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
ASSEMBLY USE REMOVAL
For best results, use short “PULSES”... Practice makes perfect!!

13 1-877-646-5288
Assembly and Use for the 1.8 L Bowl
WARNING: Never leave the appliance unattended while
in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1Place the motor base on a clean, dry, level surface such
as a counter or table top.
2Align and lower the Bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the “LOCK”
symbol on the motor base.
3Rotate the bowl clockwise as far as it will go to lock in
place. (Fig. 2)
4The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
7Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid are
installed properly, the power button ( ) will be solid,
indicating that the appliance is ready for use.
8Holding the lid by the handle in the upright position, place
it on top of the bowl aligning the arrow ( ) located on
the lid with the arrow ( ) located on the bowl’s handle.
(Fig. 5) Press the handle down until you hear a click.
NOTE: The 1.8 L bowl is not intended for blending
drinks. Do not overfill.
Fig. 1
Fig. 2
ASSEMBLY
Fig. 3a
Fig. 3b
Fig. 4
Fig. 5

www.ninjakitchen.com 14
English
USING THE 4-BLADE ASSEMBLY
1Holding the 4-Blade assembly by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight.
2Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3Plug the power cord into the electrical outlet and press
on the power button ( ).
4Select the speed that best suits your needs. Pulse
ingredients for even chopping by pressing down in short
intervals.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
5When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning.
6To remove the lid, pull the lid handle up to a 90° angle
and lift the lid off. Turn the bowl counter clockwise and
then lift off the base. (Fig. 2, Fig. 3)
USING THE DOUGH BLADE
IMPORTANT: Use only the “DOUGH” button when using
this attachment.
IMPORTANT: Use the suction lever when using the dough
blade on SPEED 1/DOUGH.
1 Place the motor base on a clean, dry, level surface
such as a counter or table top. (Fig. 4) Push the suction
lever on the side of the motor base down to secure the
suction feet to the surface. (Fig. 4a) If the suction feet have
not totally adhered to the surface, press down lightly on the
base to give the suction feet a better grip.
2Secure the bowl onto the motor base.
3Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment fits
around the gear shaft and that it is standing straight.
4Add the ingredients and secure the bowl lid onto the bowl.
5Plug the power cord into the electrical outlet and press on
the power button ( ).
6Once finished making dough, remove the bowl from the
motor base. (Fig. 2, Fig. 3)
7To release the motor base from the counter or table top, pull
the suction lever up to release the suction feet. (Fig. 4b)
NOTE: The suction lever activates the suction feet for
added stability.
Fig. 1 Fig. 4
USE
Activate
Suction
Release
Suction
Fig. 4a
Fig. 4b
Fig. 2
Fig. 3
REMOVAL USE
Suction
Lever

15 1-877-646-5288
FUNCTION CONTAINER ATTACHMENT SPEED
BUTTON TYPE OF FOOD
Nutri Ninja™
Blending Nutri Ninja™Cup Nutri Ninja™Blade Nutri Ninja™
Smoothies
Frappes
Milk Shakes
Mincing Nutri Ninja™Cup Nutri Ninja™Blade Nutri Ninja™
Onion
Garlic
Herbs
Kneading Bowl Dough Blade Dough
Bread dough
Pie dough
Pizza dough
Pretzel dough
Dough Mixing Bowl Dough Blade Dough Cookie dough
Processing Pitcher/Bowl
Nutri Ninja™Cup
Blade Assembly
Nutri Ninja™Blade
Blend
Pulse
Nutri Ninja™
Pâtés
Stewed fruits
Dips
Apple sauce
Spreads
Soups
Baby food
Emulsifying Bowl Blade Assembly Blend
Salad Dressings
Dips
Sauces
Grinding Bowl Blade Assembly Blend Meat
Grating Bowl
Nutri Ninja™Cup
Blade Assembly
Nutri Ninja™Blade
Crush
Pulse
Nutri Ninja™
Grated cheese
Bread crumbs
Spices
Chopping
Bowl
Nutri Ninja™Cup
Pitcher
Blade Assembly
Nutri Ninja™Blade
Pulse
Nutri Ninja™
Crush
Salsa
Vegetables
Nuts
Mixing Bowl Dough Blade Dough Light cake mixes
Batters
Ice Crushing Pitcher
Nutri Ninja™Cup
Blade Assembly
Nutri Ninja™Blade
Crush
Nutri Ninja™Ice
Pureeing Pitcher
Nutri Ninja™Cup
Blade Assembly
Nutri Ninja™Blade
Crush
Nutri Ninja™
Smoothies
Smooth soups
Milkshakes
Speed Setting & Uses
IMPORTANT: Use the suction lever when using the dough blade on DOUGH.

www.ninjakitchen.com 16
English
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water or
any other liquid.
1Separate/remove all parts from each other.
2Clean the motor base with a damp cloth and wipe dry.
3Place the pitcher, Nutri Ninja™cup and bowl in the
dishwasher. Place the lids and attachments on the top
rack. Use caution when handling the blade assemblies as
the blades are very sharp.
NOTE: You may also wash the containers by filling ¾ of
the container with warm water and a drop of dish washing
detergent, placing the corresponding lid on the container
and pressing the pulse button a few times. Once clean,
remove the container from the motor base. Rinse the
container, attachment and lid under running water. Allow
all the parts to dry before storing.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1Store the Ninja
®
Supra Kitchen System™upright with
the pitcher on the motor base, Total Crushing™Blade
assembly inside the pitcher and lid on the pitcher. Do not
place anything on top. Store the bowl with the 4-Blade
assembly inside and the lid on top. S
tore the Nutri
Ninja™cup and the rest of the attachments along side
the appliance or in a cabinet where they will not be
damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja®Supra Kitchen System™features a unique
safety system which prevents damage to the unit’s motor
and drive system should you inadvertently overload your
appliance. If the appliance is being overloaded, the motor
will stop and the power light will remain lit and speeds
DOUGH, BLEND and CRUSH will flash. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

17 1-877-646-5288
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or
Attachment Doesn’t Rotate.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will
remain on while speeds DOUGH, BLEND and CRUSH will flash. Unplug and
wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use pulse button for controlled
processing.
Food Collects On Lid or On the
Sides of the Container.
The mixture is to thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Motor Base Won’t Stick to
Counter or Table Top.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
Troubleshooting Guide
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.

www.ninjakitchen.com 18
English
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year
from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return
the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support,
please call our customer care and product specialists at , call 1 [phone] or visit our website www.ninjakitchen.com.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of
charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you
insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your
package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.

19 1-877-646-5288
hBol
iPichet
jArbre de transmission
k Lame Nutri NinjaMC
lBloc-moteur
mCordon d’alimentation (non illustré
aCouvercle pour tasse Nutri NinjaMC (x2)
bCouvercle du bol avec poignée de verrouillage
cCouvercle du pichet avec poignée de verrouillage
d Jeu de quatre lames (bol)
eTasse Nutri NinjaMC (x2)
fLame à pétrir (bol)
gJeu de six lames (pichet)
REMARQUE : Les accessoires ne sont pas interchangeables.
Familiarisez-vous avec votre mélangeur NinjaMD Supra Kitchen SystemMC
a
d
e
b
c
f
g
h
i
k
j
l